Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. GT & SOHC
    Replaced my rack and pinion during my engine swap, then the power steering pump had a leak, ended up replacing it as well as the high pressure line that connects it to the brake booster. Leak goes away but now am left with bleeding the air out of the system. I've tried the vacuum pump procedure...
  2. Modular Engine Parts
    Have a power steering pump from a 03 cobra. Pully got damaged somehow when the motor was being shipped. Other then that pump worked fine when pulled and has around 40k miles on it. Asking 85$ shipped. Also comes with the line shown in the pic.
  3. 94/95 Tech
    Hey everyone, so i'm having problems with my power steering leaking.. This is the 3rd time I've had a problem with it leaking. First was the pressure hose that bolted into the pump started to leak. No big deal, replaced the line and was good to go. Then the Outer O-ring that seals the reservoir...
  4. General Mustang Tech
    I have a 1967 Mustang GT with power steering. I recently noticed that the bracket which bolts to the frame on the driver's side is quite loose. This is the bracket that is supposed to provide a reaction force for the power steering ram cylinder. The bracket is supposed to be held in place by...
  5. Miscellaneous Mustang Parts
    just like the title says, I am fixing a wrecked car and I am looking for a power steering reservoir and a radiator fluid reservoir. let me know if you have them and a price shipped to Bozeman, MT 59718 edit* just need the radiator overflow now!
  6. General Mustang Tech
    Good Afternoon Gents, Quick, down and 90 fox, im in need of a new rack. Its orig power and i want to go to a manual setup. Car is a street driven toy. Slightly lowered in front. Running skinnies in front. Headers are BBK's. I was going to go with a factory manual rack for a 81. Is...
  7. General Mustang Tech
    My return fitting on the rack is leaking out the top. Is this fitting rebuildable? Most replacement racks come with the two telfon seals with two black o-rings. I think to replace the pressure side's o-ring the fitting just slides up the line exposing the o-ring. Can't do that on the return...
1-7 of 8 Results