Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 42 Results
  1. Modular Engine Parts
    Cleaning house from last rebuild. Two brand new and three used (one season) DSS Racing SX Forged pistons. For a 4.030 bore on SBF302. Great for n/a or mildly boosted builds. Here is the link: DSS Racing 8843-4030 D.S.S. SX-Series Forged Pistons | Summit Racing $50 for used and $75 for the new...
    $50 USD
  2. SVT & DOHC
    Hi all. Finally got the driver's side head off my '96, to fix a failed helicoil repair for the ol' blown-out-plug defect. I need to ream out the hole and put a Time-Sert in there. Meanwhile, though, would anyone like to weigh in on the condition of this engine? Obviously the surfaces are caked...
  3. Windsor Engine Parts
    I have a used set (8) pistons for a 408w stroker. With my stroker setup, I couldn't get the quench I wanted so my machinist recommended I get different ones. Probe 12357-030 SRS pistons. They are flat top with valve reliefs. come with wrist pins and locks. 12357 - Ford 408/427W -4.0cc Flat...
  4. Windsor Engine Parts
    -SOLD- SOLD -Speed Pro 30 Over Forged Pistons SOLD- SOLD Pistons are sold! TY CORRAL!
  5. Modular Engine Parts
    Started collecting parts for a build, but life said "nope" and money had to go another direction right now. 18cc forged pistons (standard bore), standard length forged rods with arp2000 rods- $500 shipped Trick Flow cams w/ springs part number TFS-51802002 less than 100 miles. Installed right...
  6. Windsor Engine Parts
    I have a bunch of parts for sale. If you see something you like make me an offer. if you want or need pics of anything let me know. here is my list of parts. 8 ross racing pistons xl400 82006 8 5.4 rods 2 stock e7 heads 1 fox timing cover 8 19lb injectors 1 pair fox valve covers 1 trickflow...
  7. Modular Engine Parts
    Looking for Flattop to -11 Pistons .020 over. Thanks!
  8. Modular Engine Parts
    All like new condition used on test engine. Parts are clean and ready for install. Fully forged sx -18cc pistons with moly rings. Fully forged floating I beams. 3/4 inch billet aluminum DSS main support system with arp bolts pistons also have arp connecting bolts. Also have a forged iron crank...
  9. Windsor Engine Parts
    I am cleaning out the garage and found these in a box of parts I received a while back with a 302 I purchased. They are coated stock forged pistons (E7ZE-CA): IMG_5304 by Strike_Zero, on Flickr IMG_5305 by Strike_Zero, on Flickr These are the worst ones: IMG_5308 by Strike_Zero, on...
  10. Windsor Engine Parts
    SOLD!!!!!!! Thanks!! I have for sale (8) brand new forged dished pistons from Probe. These are for a 351w with standard bore. Pistons only, no rings. $225 Shipped lower 48 US FRT-2601-STD Compression Height: 1.785 Bore: 4.00 Rod: 5.956 Pin: .912 Ring Grooves: 1/16, 1/16, 3/16 Dish: 17cc
  11. Modular Engine Parts
    03/04 Cobra (1) stock Forged Piston 46K miles w/rings and pins - $25 shipped (Last one left) 03/04 Cobra stock supercharger pulley MINT - $25 shipped - SOLD 03/04 Cobra Aluminum flywheel MINT - $130 Shipped - SOLD NEW 03/04 Cobra FORD Lower intake to cylinder head gaskets - $35 shipped -...
  12. Interior Parts
    I have the following parts for a Mustang convertible top setup: - top motor - top lines - piston/rams I believe they are for a Fox or SN (this only matters for the rams, not the motor or lines). I can double check PNs and markings tonight. I will have photos posted soon. I am looking for...
  13. Windsor Engine Parts
    Im looking for Forged, Dished pistons for a 347 stroker...around a -13cc dish.
  14. 351C/BBF Parts
    I have a set of 8 forged .030 over pistons for a 429/460. They are Federal Mogul L2366F-30 and still in the box. Never got around to building a big block, sold the truck and now have no use for these. The following is a link showing the specs: Sealed Power L2366F-30 - Forged Piston Flat Top...
  15. 351C/BBF Parts
    NIB Forged .030 over 429/460 Pistons I have a set of new in the box Federal Mogul forged pistons for a .030 over 429/460. The following is a link to see the specs: Sealed Power L2366F-30 - Forged Piston Flat Top, 4.390 Bore, 3.590 Stroke, 6.605 Rod, 429 Ford | SDParts - 1-800-456-0211 $225...
  16. Windsor Engine Parts
    1 set of 8 new Speed Pro/TRW forged flat top pistons. I bought them for a 306 I was building but life changes have necessitated their sale. They are TRW model L2482 F30. I purchased them from a Corral.net member a long time ago, but have since forgotten whom it was. Includes 8 pistons. They...
1-18 of 42 Results
Top