Ford Mustang Forums banner

piston

  1. Modular Engine Parts
    just got a car for basically free. its got one damaged piston and a spare head for it. just need to get the car on the road asap as ive got a buyer lined up for it next month looking for a piston and rod. and also an intake/exhaust valve.
  2. 351C/BBF Parts
    I have a set of 8 forged .030 over pistons for a 429/460. They are Federal Mogul L2366F-30 and still in the box. Never got around to building a big block, sold the truck and now have no use for these. The following is a link showing the specs: Sealed Power L2366F-30 - Forged Piston Flat Top...
  3. 351C/BBF Parts
    NIB Forged .030 over 429/460 Pistons I have a set of new in the box Federal Mogul forged pistons for a .030 over 429/460. The following is a link to see the specs: Sealed Power L2366F-30 - Forged Piston Flat Top, 4.390 Bore, 3.590 Stroke, 6.605 Rod, 429 Ford | SDParts - 1-800-456-0211 $225...
  4. 5.0/5.8 Engine Tech
    Ok, so I think I've got a little piston slap going on in the passenger side of the engine. It's not terrible and goes away after the car is warmed up, but if I nail the gas, it will burn oil like mad. So my guess is that the rings are bad, but I'm not a mechanic. I will be stripping the motor...
  5. 5.0/5.8 Engine Tech
    Assembling another motor, and while I was checking piston to valve clearance I came up with a problem (maybe). The intake valves I am using are the largest I have ever installed, and as such I noticed that the side clearance between the valve and the piston valve relief was very very small...
  6. Windsor Engine Parts
    hi im looking for a set of 8 preferably used forged pistons for a 351 windsor. The bore i need is .060 and used is fine because i just need to get an engine running for a little while, nothing special. i dont really care what brand.. but i have vic jr heads with 2.02/1.60 valves so i need...
  7. 5.0/5.8 Engine Tech
    Hi, I was doing some research about going with a 4.020 bore vs. a 4.030 on a rebuild. I came across the following paragraph, and I can't wrap my mind about how increasing the bore size increases the compression ratio. Perhaps someone could break it down barney-style for me? "Although quite a...
  8. General Mustang Tech
    I have a 95 mustang and wanted to install 99-04 Mustang 99-04 Gt Front Calipers. Are the caliper brackets the same with the on the 95 and the never 99-04 style brakes?
  9. Windsor Engine Parts
    I have 6 dss pistons part number 255-96 .030 OVER NOTCHED FORGED PISTONS AND I NEED 2 MORE TO COMPLETE THE SET, RODS NOT NECESSARY BUT I AM LOOKING FOR SOME ALUMINUM RODS AS WELL (COMPLETE SET) THanks CorralNet !!!:joy:
  10. Crack

    Crack

Top