Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Superchargers
    I'm looking for help with the PCV/Crankcase Ventilation plan for a new engine that I'm building. The engine has a Vortech supercharger and Pro-M EFI with a draw through Mass Airflow Sensor. I would like to run a PCV system and want to make sure that I don't end up with oil leaks, blown seals or...
  2. General Mustang Tech
    Currently in the middle of installing the On3 turbo for my notch. It's a 68mm that we're going to keep around 6-10 pounds of boost. I was all set to close the PCV valve on the intake and run a breather on the oil tube, but after looking a bit deeper, some have told me I need to have more of an...
  3. 5.0/5.8 Engine Tech
    Hello, I used to have an account here but I havent had a fox for a bit and forgot my password... I really need help, I just finished a 331 stroker on my 88 notch ex georgia police interceptor. When I purchased the car it was a 306 with edelbrock performer intake and heads, 24lb injectors with...
  4. Superchargers
    have a few questions and from other and older posts it seems like you know what you are talking about. I have a 95 Saleen, I have dropped in a 408 Dart block, and running a Procharger D1. It is fuel injected, and intercooled. I have AFR205 heads, and trickflow valve covers on them. That said...
  5. Windsor Engine Parts
    Found out from rdclark123 that these are only 10AN fittings. Corrected mistake and these are headed back my way and for sale again. The covers do have scratches but have the 10AN fittings welded in for a catch can or evac pump.... I will also throw in the new valve cover gaskets and new...
  6. 5.0/5.8 Engine Tech
    hey everyone i need some help about a week ago my water pump started leaking really bad, so bad it would cauise my car to over heat alittle bit i just got on a new edelbrock high flow pump started up the car and went up the street and gave it full throttle and it just started steaming smoke...
  7. SVT & DOHC
    I've been stalking corral.net for years, and always been able to find great info on whatever was getting me stumped- thanks everyone. Haven't signed up until today. Here's my issue... I have a 2003 Mach 1 with a D1SC and a slow rear main leak that's been bothering me for a couple years. Just...
  8. pcv mod

    this is a pic of how i modified the pcv system to stop sucking oil
    pcv
  9. pcv mod

    this is a pic of how i modified the pcv system to stop sucking oil
    pcv
1-10 of 10 Results
Top