Search Results for ‘on3’

Just bought the second gen on3 turbo kit for 94-95 mustang. Was wondering if anyone also bought it and had any info on it like tips or tricks from stuff they ran into?

SOLD!

SOLD!

I'm considering a budget build using the ON 3 kit, but I'm not sure where to run the downpipe to not have to get a k-member and save that little chunk of change to put towards fuel. Has anyone done this? Or have any suggestions?

SOLD!

SOLD!

SOLD!

So yeah pretty much it. I'm building a turbo car. I've started this thread on other sites, but you can never have too much help! I'll be posting progress with the build along the way. It'll be a long and drawn out process but it'll be worth it. Figured I would go ahead and start this on here...

Traded

Here's my set up haven't taken it to the dyno yet but hopefully I'll be above 800hp Engine specs Chevy ly6 6.0 364ci Twin on3 70mm turbos Stock rotating assembly L92 heads with ls7 intake valves an double springs Texas speed 224r cam Ported ls6 oil pump vic jr intake with 2 inch spacer an...

ok ive got a cheap turbo from a friend for basicly nothing,i want to do a junkyard turbo setup on my car its carbed 306,f303,torker2 intake,all thru a c4, and pistons are hypers ,stock rods,stock crank,but any way if i need to upgrade to forged probes thats not a problem,now i no enough about...

I have a brand new on3 performance ceramic ball bearing turbo for sale. Never used at all. Only selling cause I went bigger. Heres the specs: Cold Side: Compressor Wheel 76mm .80 a/r 4” Inlet and 2.5” Compressor Outlet Inducer- 76.71mm Exducer- 102.36mm Exhaust Side: Exhaust...

Hey guys I'm new to the forums, and not sure if this is right section. Forgive me if its not. So here's my situation. I installed an on3 turbo kit on my 91 5.0. 67mm turbo 42lb injectors blow through PMAS 255lb fuel pump ect. I took the car to a local shop to have it dyno tuned. After sorting...

I bought this 03 GT in 2010 from a dude I knew, and my friend ended up buying it from me shortly afterwards. He took it apart last year to start on the turbo kit, and is just now recently getting motivated enough to finish it. On3 Performance older non forward facing kit with MP76 Turbo @ 12ish...

I'm getting ready to buy an on3 turbo kit but the guy sold the MAF kit and 42 injectors i was wanting to get. So what do I do now? Also i found a Pro-m 75mm.mass air meter calibrated for 42# injectors. Will this work? NEED HELP ASAP

SOLD!

SOLD!