notchback

FS or FT: 93 Coupe SSP, DSS, Turbo and much more! Sold Sold Sold!!

edit: cleaned the idle control valve today with STP throttle body spray cleaner and drove it around, then came back and iddled it on driveway, idle smoothed out and didnt turn off, like I suspected its an idle control valve, its fine now, might be best to put a new valve though for long term...

edit: cleaned the idle control valve today with STP throttle body spray cleaner and drove it around, then came back and iddled it on driveway, idled smoothed out and didnt turn off, like I suspected its an idle control valve, its fine now, might be best to put a new valve though for long term...

88 coupe 514 SVO crate motor 625 HP,John Kasse updated Cobra Jet Heads,C6 rev pattern manual upgraded servo,bands, clutches. BTE 3500 stall,trans cooler 8.8 fully welded 33spline moser axles 3inch 1/2 studs 5 lug c-clip eliminators, moser girdle full spool 373 1350 custom drive shaft 8 pt moly...

Here is the craigslist add.... http://fortwayne.craigslist.org/cto/2068330240.html I found project car that I want really bad, so this one has to go. $5,000 firm This is a good price for this car considering I have more than that in just the motor. Less than 500 miles on motor and transmission.

1989 Notch Vortech TKO HCI - Long Island NY Sold! Thanks Corral!!

1988 lx street/strip i will try to describe the best i can, i did not build this car so i cannot say alot for the specs on the internals, but what i can say is this car pulls hard and straight and pride in ownership shows with the workmanship. to name a few: 351w bored .30 scat pistons and...

Wanted: 92-93 Notchback / Coupe with 5-lug and Cobra brakes Hi guys, looking for an 92-93 LX 5.0 Notchback / Coupe. Must have 5-spd, 5-lug conversion, Cobra brakes, EFI and AC. Please no verts, GT's, hatchbacks, or 4-cyl conversion cars. Low miles are a plus also. Please only PM me what...

SOLD Late build 1993 true original 5.0 Mustang. The current mileage is 77,721. It’s reef blue with the sought after full black interior. I purchased this car from another Corral member back in Sept. 11, 2006 with only 75,344. Unfortunatelly due to me joining the Air Force and planning on...

How much hp/tq should I make??? What 1/4 mile times should I expect? What 1/8 mile? The car is a 92 notchback with 4.30 gears and 70/30 lakewoods. I have a stock 5.0 bottom end with afm n 41 cam tfs 170cc track heat fast as cast heads victor jr carbed intake 650 demon carb, I am running bbk...

91 Red Notch Roller 6" Cowl hood Aluminun Wing Has k-member/a-arms Flaming river man rack/shaft Man. Brakes Front Aerospace Coil over kit front Camber/caster 8.8 with 33 spline axles,Spool,C-clip Elim,Girdle cover Aeromotive fuel pump Stainless Hoses Cell Draglites tires only 2 passes. 4500...

For sale is my 92 mustang calypso green coupe roller It is a street strip car..Interior is in mint condition i give it a 9 out of 10 It has 2 kirkey racing seats black..interior is all black car has about 91,000 miles on it..everything electrical still works on the car 35 spline axles with 4.30...

1993 Coupe Turbo 76mm: New Price $6500 and I will include the tweecer R/T with the deal. Price is firm. Car made 390 RWHP, 460 Ft-LB torque at 8 psi. See video: http://www.youtube.com/watch?v=HxYquDT5V5w Car will drive anywhere, runs like a stocker, but has incredible torque when the boost...

im in love with the notch body style...looking to trade

im in love with the notch body style and im finally ready to get one...I have a nice 95 5.0, automatic, with 55,000 original miles and a few mods including: mac ceramic coated headers off-road H-pipe dual 2.5" flowmasters 65mm throttle body 65mm mass air flow K&N cold air intake stock intake is...

Looking for a nice clean notch, inspected or easily inspected, stock or close to stock is perfectly fine. Thanks.

I have a bunch of the larger interior stuff from the notch. Color is grey. All parts are in good shape. I don't sell junk. sail panels - left and right interior quarter panels - $75 each quarter windows - rubber is prety good shape - $125 for both SOLD center console tall arm rest - $40...

I have a DSS XE 408 for sale, AFR 205's, Dart Iron eagle block, full roller cam, ARP fastners. 9.3:1 compression. This is a 15,000 dollar engine, I'll let it go for $9,500, this is a complete engine fuel injected with Anderson ford PMS computer. Aprox 4K miles, mostly highway driving from...

SOLD please delete