Ford Mustang Forums banner

nmra

  1. 5.0/5.8 Engine Tech
    Rich Groh Racing Engines Build Dart Iron Eagle Block Custom 500"@ the valve camshaft Roller Cam Bearings scorpion lifters Scat billet crank Crower billet rods CP Gas ported Dual valve relief Pistons for Inline or TFS heads Total seal Steel rings Custom ported TrickFlow heads with Ferrea Hollow...
  2. Drag Racing
    Got in some qualifying yesterday, it rained this morning, weather is good now, gonna be here until 11 PM central when we hit curfew. Lots of photos over at StangTV.com will be updating all weekend long over there and will try to post some here as well. Coverage here: Same Day Coverage...
  3. Windsor Engine Parts
    *NMRA RENEGADE HOLLEY SYSTEMAX UPPER AND LOWER INTAKE. *OVER $1300 IN PORT WORK ALONE. *POWDERCOATED BLACK AND DARK RED-ORANGE. *MIDDLE BOLT HOUSING ELIMINATED FOR MORE AIRFLOW, WILL INCLUDE FLUSH BOLT AND SCREW IN PLUG. *WILL ALSO INCLUDE 1" SPACER. *THREE VACUUM PORTS HAVE BEEN DRILLED AND...
  4. Southeast
    A Party 20 Years In the Making! Friday Night Hooters Party Kicks Off NMRA 20th Annual Spring Break Shootout at Bradenton Motorsports Park in Bradenton, FL Santa Ana, Calif. (February 21, 2014) - What would the Nitto Tire NMRA Spring Break Shootout be without a Spring Break style party? Kick-off...
  5. Drag Racing
    There will be a Thursday Test and Tune session at the Nitto NMRA Spring Break Shootout at Bradenton Motorsports Park, March 6-9 and at the Ross Racing Pistons NMCA Muscle Car Nationals, March 20-23 also at Bradenton Motorsports Park. Both sessions will be from Noon to 5PM. Take advantage of the...
  6. Southeast
    Do you think your manually shifted Ford-powered street machine is one of the quickest in the country? Well, you won’t want to miss this! Long-time NMRA True Street supporter, TREMEC, in part with Muscle Mustangs & Fast Fords magazine, has announced that they will once again hold the “Stick Shift...
  7. CJ Pony Parts, Inc.
    You've seen Product Specialist, Bill Tumas, in our YouTube installation and product videos, and you might have even seen him around the CJ Pony Service shop or at one of the several CJ events we hold annually. Now, we want to share some of his story with you, including a bit about his 1996...
  8. CJ Pony Parts, Inc.
    CJ Pony Parts [email protected] pass Nov 24th at Cecil County Dragway Despite the assertion that Gotta Have It Race was done for the year, Bill and the Gotta Have Builds team were determined to see if it had a little more in it and could hit the 11.20s, if everything could go just right. Bill and...
  9. CJ Pony Parts, Inc.
    Congratulations to our own Bill Tumas, who, with Gotta Have It Race, is featured as the cover article in the December 2012 issue of Race Pages! Race Pages is the official magazine of the NMRA Keystone Automotive Ford Nationals series, which is the series that the entire Gotta Have Builds team...
  10. CJ Pony Parts, Inc.
    Last month, the crew from CJ Pony Parts took Gotta Have It Race and Gotta Have It Street to the NMRA event at Maryland International Raceway and had such a great time, that we decided we wanted to do as many NMRA events as possible. The next event scheduled was on June 14 & 15 in Milan...
  11. CJ Pony Parts, Inc.
    CJ Pony Parts - Gotta Have It Race Runs 12.08 @ 111.29 - May 5th, 2012 Gotta Have it Race ran at Maryland International Raceway on May 5th, 2012 at the NMRA Ford Nationals and recorded its best run of 12.08 @ 111.29 with a 1.68 60 foot. Gotta Have it Race was able to hook up while leaving the...
  12. Drag Racing
    Steeda Autosports has entered into an agreement with NMRA to sponsor for the 2010 Racing Season the Real Street Drag Racing Class. NMRA, is the #1 all-Ford motorsport drag racing series in the country features seven events around the U.S. and is the #1 all-Ford motorsport drag racing event. The...
Top