Ford Mustang Forums banner
nitrous
1-20 of 145 Results
Advanced
  1. Power Adders For Sale
    Used Nitrous Outlet hard line kit for 2011-2018 Mustang / F150 with 5.0. Kit has the optional purge and nitrous bottle pressure gauge as well as the billet bottle bracket purchased separately. Works perfectly. Sold with bottle empty. Nearly $1,500 new. Selling for $900 OBO. Switching car to...
  2. Power Adders For Sale
    Pulling the nitrous off the car and going turbo so a good portion of my nitrous parts are for sale. Everything works 100%. All prices are shipped to the 48, except -3 hose assemblies. If buying $80 or more I will include shipping. I will not ship the bottles though, sorry. Tfs R nitrous plate...
  3. Power Adders For Sale
    Nitrous outlet direct port kit...ported intake.. aeromotive standalone fuel system.. progressive controller..relay board .6an feed lines for fuel and nitrous with filters...bottle heater...and choice of 10 or 15lb bottle...car made 615 on mobile Dyno...has been [email protected] in 3900lb car...
  4. Mustangs For Sale/Wanted, 1987-1993
    1989 Mustang hatchback ready to go racing. Has original body with lift off outlaw hood, lift off rear hatch, 8 point mild steel cage,, sw racing aluminum dash, overhead switch panels, quicksilver ratchet shifter, 5 gal fuel cell with braided -10, electric pump, billet filter, adjustable...
  5. Electronics and Entertainment
    NOS Mini controller, perfect for launching a nitrous car. $300 new, selling for $180. I've had it on the car for about a year, it's in great condition, was mounted in the interior of the car. •2 fully independent nitrous controllers in one small bullet-proof case •Hand held programmer for ease...
  6. Nitrous
    Mustang Gt Nitrous Solenoids not Clicking Hey Guys, Whats up? I have a 2005 mustang Gt with full bolt on and I'm trying to run a nitrous outlet plate system with a Zex Universal Tps Wot controller. For some reason, I'm able to program the Wot controller but when I press the pedal at full...
  7. Windsor Engine Parts
    I have a custom CompCams Nitrous cam for 393-421 sbf. Was spec'd out by MMERacing. The specs w/1.6 roller rockers are .697/.702, 267/280, 114. It's designed for a decent shot of nitrous and has some aggressive lobes and ramp speeds! It's cut on a billet core. Has 20 1/8 mile passes on it. Went...
  8. Power Adders For Sale
    Yup, just the entry-level plate kit from NOS, this is used but in pretty nice shape. The bottle is a regular ol' short/fat and has the Hi-Flow valve too (none of that Sherwood crap, ala their Sniper system). The Powershot solenoids look to be the newer iteration and the braided nitrous line and...
  9. Power Adders For Sale
    NOSzle nitrous kit FS This is a direct port nitrous kit that requires no drilling or modification of the intake manifold. It's perfect for a big shot, and even if you're running a smaller shot, a kit like this will ensure more even fuel and nitrous distribution and make nitrous backfires much...
  10. Power Adders For Sale
    New Fuel and Nitrous NX Mainline solenoids (from the 250hp mainline carb kit) $165 shipped ($200 plus from Summit) Like New Square Bore NX Plate with most jetting, and fittings (missing 1 jet and has scratches) $165 shipped (Is rated to 250 hp is this kit, may do more with bigger solenoids?)...
  11. Windsor Engine Parts
    I am toying with the idea of selling my engine and going a different route. It is a fully built 327 cubic inch stroker. Same as a 331 but with a standard bore. The engine has very little time on it. A handful of dyno passes, 3 track passes and about 500 street miles. Here are some specs on the...
  12. Mustangs For Sale/Wanted, 1987-1993
    1982 Ford Mustang, 1990 front end 25.5 cage, cert is expired now Toreador Red, nice paint, Fiberglass hood, 5” cowl, glass trunk lid and wing 467" sbf - Motor is apart currently Dart iron eagle block 55mm cam bearings Callies Dragonslayer crank, 4.250 stroke Eagle 6.20 rods extra pistons, they...
  13. Power Adders For Sale
    Two NOS. 4150 nitrous plates 50$ each.
  14. Windsor Engine Parts
    354" SBF Short block: 8.2 deck A4 Motorsports block, HTC 4340 crank, Eagle H beam rods, JE 9cc dome nitrous pistons, .700 lift Comp solid roller nitrous grind cam, Comp .904 Chrysler link bar lifters, all ARP hardware, 7 qt. pan with pickup, SFI balancer and flex plate, new rings, new bearings...
  15. Windsor Engine Parts
    T/K 347 SBF with fogger for sale Stock E7TE roller block Eagle crank and rods Main girdle Probe pistons 11.0:1 comp ratio 7 quart pan Twisted Wedge aluminum heads, 2.02/1.60 valves Crane 1.6 rockers with girdles Mechanical flat tappet nitrous cam (don't know specs) Edelbrock Vic Jr...
  16. Power Adders For Sale
    Used NX Shark Nozzle for sale. I'd like $50 for it but will entertain offers. Thanks.
  17. SVT & DOHC
    Please delete Post completed, thank you.
  18. Windsor Engine Parts
    Up for sale is a Lunati billet roller cam. It is a retrofit roller that will work with non-roller as well as roller applications. It will also work with fuel injection or carbureted engines. Likes nitrous and small blowers. The cam has appx. 1000 street miles on it. The cam itself is in near...
  19. Nitrous
    I have a zex traction control switch and I'm in need of a little help.. The problem is I'm not sure what to program step 1. The car is a 1993 lx fox 5.0..
1-20 of 145 Results
Top