Ford Mustang Forums banner
mufflers
1-20 of 29 Results
  1. Exhaust Parts
    Got a set of axle backs I don't need - they are an unknown brand, possibly a custom job with some sort of bullet muffler. If you want to hear what they sound like, I made a video on comparing them with the Roush ABs here. You can hear them at the 7:30ish mark. I got them second hand from...
  2. Exhaust Parts
    For sale: Roush axle backs for 2011-2014 Mustangs. I had these on my 2014 GT for about five years, approximately 60k miles. As you can see from the pics, they could use a little bit of polishing but I haven’t had any issues as far as leaks and they sound great. Getting rid of them because I want...
  3. S197 Mustang GT (2011-2014)
    I picked up these axle backs second hand a few months back. Nobody really seemed to know where they came from (seller wasn’t sure either) so I’ve started calling them the “mystery mufflers”. This got them installed on my 2014 GT and made a video of the install and a sound comparison between...
  4. Exhaust Parts
    I have two 3.5" Schoenfeld outlaw mufflers with flowtubes and turndowns. Everything is 3.5" and is welded together for a nice clean install. The mufflers are 11" long...overall length of everything from front to back is 30". I'll sale everything for $70 bucks! PM me or call/text me at 3013953921...
  5. Exhaust Parts
    I have 2 used Hooker Aero Chamber Mufflers P/N21502HKR. The are 2-1/2" with offset inlet and centered outlet. They sound really good and i got lots of compliments with them. So good that i went with the same mufflers when i upgraded to my 3" system. Asking $80 and i will throw in the turndowns...
  6. Exhaust Parts
    Have a set of almost new SLP LM1 mufflers. On my car for 30 miles but they are a little to loud for my taste, sound great but are loud. Asking 115 shipped plus PP fees. They are advertised on multiple sites so first come first serve. Contact info: Email: [email protected] Text/call...
  7. Exhaust Parts
    Looking for a 3in h or x pipe sn95 longtube setup need some good sounding 3 in mufflers thanks
  8. Exhaust Parts
    I am looking for a Borla stinger IRS catback or just the stinger mufflers so i can weld them into my current catback. Prefer a polished setup but it doesnt really matter as long as they are in good condition and your asking price is reasonable. Let me know what you've got! I am eager to give...
  9. Exhaust Parts
    I have a pair of Super 44s left over off an old setup. They are 3" in/out and offset/offset. They are meant for a Fox body. No tips or pipe welded to them. Dimensions 9.75" x 13" x 4" $75
  10. Exhaust Parts
    looking for a set of long tube headers for a 5 speed 302. looking for MAC, kooks, bassani, etc. just no BBK. i also have a set of spintech mufflers that id be willing to maybe trade for em an plus some cash lemme know! not looking to spend to much either. doesnt have to be perfect condition. can...
  11. General Mustang Tech
    so just tryin to get a specific exhaust note. i really like the way the 4.6 motors sound with an X pipe and bassani an everything, but i have a 5.0. i was just wondering whats a good exhaust set up for that raspyness? i have BBK longtubes already with an off road h pipe and spintech dumps. i was...
  12. Exhaust Parts
    If you are looking to restore you Fox 5.0L, I have the following exhaust hardware available: Parts: 1991 5.0L LX <100 miles when removed from new car back in 1990. - ORIGINAL mufflers w/ flow tubes $100 *tailpipes and hangers were cut off of the mufflers -...
  13. Moss Muscle
    Check out the deals we have on the 35% Off Sale at MossMuscle. Check it out here! This is one of our great deals: Are you looking for a aggressive sound? Look no further..Moss Muscle has the Borla Axle Back Mufflers for your 2005-09 GT for only $470.95 We’ve got these in stock and ready...
  14. Exhaust Parts
    I have 2 2 1/2 inlet 2 1/2 outlet mufflers that I just pulled of my mustang ! I am only getting rid of them bc I had to upgrade to 3" and 1 chamber race flows. I CAN not find the flowmaster name on the mufflers , BUT, I have owned 5 5.0 mustangs and know the sound well. If they are not Flows...
  15. S197 and Coyote Parts
    Stock mufflers with tips Stock exhaust manifolds Stock Cats Very good condition. Around 20k miles. Pics available on request. Not sure what this stuff is worth. Make offers. I'd prefer not to ship but will if you pay for it. I'm on the Mississippi Gulf Coast. I'm new here (obviously)...
  16. Exhaust Parts
    EVERYTHING SOLD!!!!! 94-95 Cobra X pipe. Has one large ding and a few small dings on the left side (see pic) SOLD!! $30 plus shipping. SOLD! SOLD!! SOLD!! (shipping should be about $25 and under depending on how close you are to me) *****MAKE AN OFFER NEED THIS THING GONE!!!!!!!! 94-95 GT...
  17. Exhaust Parts
    I changed out my mufflers, so these Flowmaster 40 series are available. They were on my car for about 5,000 miles. 2.5" openings with offset. Black color is a trash bag that got caught under the car. Does not affect performance. $65 shipped money order or $68 shipped with Paypal. They...
  18. Exhaust Parts
    I have for sale a set of Corsa DB Red series mufflers. They have a 2.5" offset inlet and outlet. They are in good shape. They will need to be welding into your existing system. These things sound great and really do take the dreaded 2,000 RPM drone out of the system. I am asking $250...
  19. Exhaust Parts
    Ok guys so the mufflers are taking a little longer to get in...They are being made as we speak...The design is great and I can't wait to put them on my car...We still have a great list of exhaust parts for mustang enthusiasts...Here is most of our product line High-Flow Catalytic Converters...
  20. Exhaust Parts
    I have for sale a pair of MAC mufflers. They were cut off my catback, so they would need to be welded in. Call/text me, Ryan, 443-752-2960. I have pictures. best offer takes them
1-20 of 29 Results
Top