Ford Mustang Forums banner

motor

  1. Modular Engine Parts
    Willing trade the following: http://forums.corral.net/forums/showthread.php?t=1194172 For a built Navi 4v Motor. If it is a built motor I will include an agreed cash amount on top. If it is just a stock long block and you have the parts to do a built 5.4 4v I am open to working a trade on that...
  2. Windsor Engine Parts
    I've got a complete & running 5.0L EFI for sale. It's a 1990 non-HO MAF motor with 156k miles, and I'll throw in the EFI engine harness if you want it. Asking $200 OBO, but MAKE AN OFFER! I want to get this thing out of here! Located in Southeast Ohio, aprox. 90 miles from Columbus. My truck...
  3. Classifieds Feedback Area
    Could not have gotten better service ANYWHERE!!!!!! I do not have a negative word to say about Nick or his work. He rebuilt my 4.6SOHC and put in 4v pistons, P&P the heads & installed 2.5 Bullet cams. I reinstalled the motor myself and found there was a major rear main seal leak. Nick picked the...
  4. Windsor Engine Parts
    Have a 302 complete oilpan to intake with the headers and all.... came out of a good running car. have spark plug wires, just random stuff that goes with it. Have a 95 upper intake or a fox body intake. Just tell me which one you want. 89-93 accessories. Good motor. was asking $600 for...
  5. Windsor Engine Parts
    hydrolic roller cam cammotions ground on a 1.12 580 lift. diamond pistons 40 over has been fly cut. set of solid rollar lifters. j302 heads aluminum 48cc or 54cc combustion chamber not 100%. crane gold rockers, screw in studs and guide plate, harden push rods, roller timing set, high volume oil...
  6. Windsor Engine Parts
    351 windsor engine originally out of 1984 F-150. mileage unknown. dissasembled down to block and rotating assembly. comes with heads, oil pan, oil pan pickup tube, stock 2bbl intake manifold and other corresponding parts. pickup only, located in Fairfield, Ct one hour north or new york...
  7. Windsor Engine Parts
    i have a coast high performance 347 with 2k miles on it stock block steel crank main girdle hv oil pump probe hbeams probe pistons 10.5:1 cr foxlake ported performer heads from orig motor have more than 2k on heads custom comp cam 58x lift on a 114ish lsa (need to get cam card for exact...
  8. Windsor Engine Parts
    R302 block. 0 decked, Bored and stroked to 331. All new gaskets, ARP studs on heads and bolts throughout. 100 miles on motor.(never finished project) -7qt moroso pan, pick-up and HV oil pump with hardened shaft -Forged scat crank knife edged, Manley H-beam rods and JE forged pistons, ATI...
  9. Modular Engine Parts
    I have a 20K mile 04 Mach 1 Engine, 5 sp Trans, harness, and cpu that I would sell for $3K plus shipping- I have access to pallets. Great for a mod swap or upgrade your gt to 4v. It is still on k-member and I also have driveshaft with yoke on it to include in the deal. Keep in mind since its a 5...
  10. Modular Engine Parts
    NO REASONABLE OFFER REFUSED Engine is out of a 2002 explorer so the block is aluminum. Approx 36,000 miles on it, has a slight tap that goes away when the engine warms up (possible wrist pin, not interested in tearing it down to find out). Never starved for oil, never any metal in the pan. I...
  11. Windsor Engine Parts
    Got a stock 302 complete intake to oil pan with 87-93 parts on it. $600. OBO Feel free to PM me make offers
  12. Windsor Engine Parts
    im looking to buy a 351w that doesnt need any sort of work. i just wana slap my heads on nd be done. im looking to spend less then a 1000.. pm if u have anything thankyou
  13. Windsor Engine Parts
    well what i have is a 69 351w block(thats what the motor shop told me) that makes 500hp at the crank the motor consist of the stock crank stock rods hyper pistons 210cc procomp aluminum heads 1.6 ratio procomp roller rockers .520...540 292duration cam professional products dual plane intake...
  14. Suspension
    All items are for a fox body. All items are located in Fremont, Nebraska 68025 -Motor mounts **SOLD** -Steeda 1 3/8 front sway bar. Powder coated blue (unknown miles). Cant use w/ 03 cobra swap. Not sure of price new, looking to get $130 shipped. Please email me at [email protected] or...
  15. Windsor Engine Parts
    hey guys im getting rid of my 302 and some parts.. i have set prices on it and will like to make deals.. i need everything gone by the end of this month or its being giving to my uncle. I have no room for it anymre 1. 1984 302 motor with 60k.. complete motor.. it has a stock bottom end, its...
  16. Windsor Engine Parts
    382 cu. in. 7000+ rpm Dart small block - 600+ horses on pump gas. Motor capable of handling 1200 hp. Brand new, never run. Built by Professional engine builder/NMRA champ Rich Groh of RGR Engines, Algonquin, IL. This is a race motor built for the street - no expense spared. -Dart Iron...
  17. Windsor Engine Parts
    I picked up a 1992 Mustang GT Convertable the other day for its black interior. Now that I have that, the rest is up for sale. The engine and trans looks to be all original and runs great. The guy I bought it from said it has a new clutch in it. I believe him because I drove the car home and it...
  18. Windsor Engine Parts
    Motor was rebuilt in 2000. It was in a daily driver for 4 years and ended up with a turbo on it. Mileage unknown due to speedo issues. Runs decent, could probably use a set of rings. $200 picked up in Springfield, TN.
Top