Ford Mustang Forums banner

motor

  1. Windsor Engine Parts
    I have a Sportsman 351 shortblock. (roller setup) for sale. This is a Sportsman block (700 HP block) out of the Ford racing catalog with low comp (8.5) pistons and Forged rods. Bored 30 over. It does have a "stock" ford crank. It ran great when pulled. It was in my street car, rarely...
  2. Windsor Engine Parts
    • D.S.S. shortblock-306 forged pistons, Arp rod bolts, DSS girdle and windage tray. Will come with Canton 7qt. oil pan that is tapped on both sides for superchargers/turbos or whatever. Ran great when pulled. Went 11.5’s with 6psi on my car. Been sitting in a heated garage since pulled...
  3. Modular Engine Parts
    700 picked up or delivered in the dfw area
  4. Windsor Engine Parts
    Milodon 22040 - Milodon Stainless Steel Oil Dipsticks New in package Dipstick assemblies are made of CNC'd billet stainless steel that will not tarnish like aluminum. Flexible oil dipstick tube will flex around header tubes, frames and mounts. They use an o-ring seal top and bottom to...
  5. Windsor Engine Parts
    Edelbrock Performer 5.0 EFI 302 Intake Manifold. Similar (but better flowing) to a Cobra/TFS Street Heat Intake. I dont have the upper to lower bolts, but you can buy them online, or gets studs from the part store. Has removable side cover to make porting easier. One of the ears has been broken...
  6. Windsor Engine Parts
    I have a mint 351w roller motor out of a 1995 lightning comes with crank. Pistons and rods are a lil extra. Would make a great stock block turbo motor.. I have pics or just come get it located in jackson thanks 848 459 9939
  7. Modular Engine Parts
    SOLD!
  8. Interior Parts
    I have the following parts for a Mustang convertible top setup: - top motor - top lines - piston/rams I believe they are for a Fox or SN (this only matters for the rams, not the motor or lines). I can double check PNs and markings tonight. I will have photos posted soon. I am looking for...
  9. SVT & DOHC
    I have a 96 Cobra I just bought and the bottom end is still together but the heads are off the motor. Car was getting hot I was told. I am not sure if they burped the motor when they refilled the radiator as the person who owned the car does not know much at all about motors. I am going to have...
  10. 5.0/5.8 Engine Tech
    anybody know a good 400hp setup thats fuel injected. gonna be working a lot this summer so im thinking about putting in a 347. wondering if i should bore the stock shortblock or go with a completed 347 shortblock? also i want to get 400hp on motor with the 347 so what other things am i going to...
  11. Windsor Engine Parts
    Im selling a complete motor. Its a 331 built by DSS. Its a SPORTSMAN B50 block with all forged internals and blower ready. Forged 4340 crank, Forged I beam rods, Probe forged pistons, DSS Main Girdle, DSS Windage Tray, Internally Balanced, AFR 185 Heads, FMS 1.6 Roller Rockers, Comp Cams XE274HR...
  12. Windsor Engine Parts
    I got a roller motor I dont need anymore. Its STANDARD BORE, stock pistons, rods, and crank. All in good shape. Took all apart to build a 347 stroker but found another block. Cylinders might need to be honed because its been sitting in my garage, (in an engine bag) but all in all good shape...
  13. Windsor Engine Parts
    '89 5.0 HO Motor & AOD - $750 Out of a Thunderbird 63k miles Comes with stock intake setup Ford Racing D302 intake - $125 PM for link to pictures New Port Richey, Fl
  14. Windsor Engine Parts
    New Port Richey, Fl Out of a Thunderbird 63k miles Comes with stock intake setup PM for link to pictures Contact: (727)569-7445 or Email
  15. Windsor Engine Parts
    351W EFI Distributor, setup for remote mount TFI, so it goes perfect in a 94-95, setup for roller cam, has MSD Cap. The wire cover coming out of the side is a bit melted, but the car ran fine. I had the cap off the other day, and noticed it had some oil in it, not sure why? $50 SHIPPED Energy...
  16. 94/95 Tech
    Hey there! I have a 94 mustang, base model v6. nothing special. i blew a valve and decided to just drop a whole new beast inside. I bought a Ford 302 out of an 89 mustang. HO Rollers, performance cam. It's the 5.0 (obviously), i bought a C4 transmission to put behind it and im just having some...
  17. 5.0/5.8 Engine Tech
    My mounts on my 86 GT vert were bad, so I replaced them this weekend along with the trans mount. I had the typical fan rubbing occurring, and my fan blade was cracked at almost every vane. After putting in my new mounts, I still had some slight rubbing of the fan and wound up shimming the...
  18. Interior Parts
    I'll ship it if you want to pay the shipping... pay pal http://boston.craigslist.org/sob/pts/1778493294.html
  19. Miscellaneous Mustang Parts
    I have a good condition fully functional top motor out of a 86 Mustang. $45 shipped via ground. I also have the rams available for an extra $15 each plus shipping.
Top