Ford Mustang Forums banner
motor
1-20 of 64 Results
  1. Windsor Engine Parts
    SOLD! I am parting out my 1987 Mustang GT that I bought when I was 17 (30 now) in order to pay for my wedding. This is the listing for the engine. The engine can be bought as a complete engine (without front accessories) or longblock, or shortblock only. Engine is currently in the car and runs...
  2. Mustangs For Sale/Wanted, 1999-2004
    Hello all! Been a while since I have been on message boards, but some of you may know my username from other sites. Anyhow, I wanted to get a gauge as to how much I can get for my car as I plan on selling it ASAP. Here's the story..I was driving it about a month ago and apparently blew a rod...
  3. Miscellaneous Mustang Parts
    $50 Will fit New Edge. I have several so pics are representative. $60 shipped CONUS from 30269. Pics: https://drive.google.com/folderview?id=0B6NlbZzWOkJifmRMNW9Rai1nSGt3d1RkRFlSUFN5bjhuY1pPODREOTJMcTJwMUhfZkdkYnc&usp=sharing
  4. Modular Engine Parts
    what I have for sale is a 2007 4.6 with less than 8,000 miles. motor is complete less harness with comp cams, phase limiters, 42lb injectors, Kenne Bell 2.6 . motor make a conservative 490 at the wheel and is still in the car. Will be coming out soon or sooner if necessary. please give me a call...
  5. Windsor Engine Parts
    I am selling my Ford SVO R302 shortblock I just removed it from my NMRA renegade car at the end of the season. Short block includes ross pistons, aluminum rods, and eagle crank. Engine has 70 total 1/8th and 1/4 mile passes on it since last freshen up. Just went 8.0x at over 172mph right...
  6. Modular Engine Parts
    Well a few days ago my motor gave out on me took it to a mechanic and looks like the Engine Rods knocking and i need a whole new motor... I'm only 17 working a part time, but i need my car to provide for myself if anyone has a motor out there thats not to high on mileage feel free to shoot me a...
  7. Windsor Engine Parts
    Selling a turn-key setup here. 5.0 from my buddy's '94 GT. 2nd owner car with 60k on it. Had Mobil1 oil changes since new. Doing an LS swap in the car, so everything goes. Comes complete with: starter alternator power steering pump smog pump flywheel k-member engine mounts harness computer...
  8. SVT & DOHC
    Ok do I am deciding on a path to go with my mach 1. I am deciding on all motor too end for one which is: throttle body, cai, long tubes, 42lb injectors, kb boost a pump, cams (possibly comp 106400, and port polished heads tryin to get 350rwhp all motor. Or turbo/supercharge. If I go all motor I...
  9. Modular Engine Parts
    Hello I have a MMR900 w/ following: •Standard Bore -18cc Dish Pistons (Stock Compression) + Cast Iron Block •Forged 8 Bolt Crankshaft (I will include flywheel if u need) •Manley 594200 Pistons •Teflon Treated Piston Dish ($250 Upgrade!) •ARP Mainstuds ($150 Upgrade) •ARP2000 Rod Bolts on 4340...
  10. Modular Engine Parts
    I have a complete 4.6 engine for sale from a 1998 GT Mustang. It includes the computer and wiring harness. I have an automatic transmission you can have, but it needs rebuilt. Flexplate is still attached. The engine is all stock. $600. Located in Farmersburg, IN 47850. Can deliver a reasonable...
  11. Electronics and Entertainment
    Have mach 460 amps aftermarket clear tail lights 96-98 style Vert top motors & hydraulics Misc Wiring foglight switch Low Mileage radiator fan (20k or so)from parts store (old one motor seized and burned up) Electronics Partout...
  12. Windsor Engine Parts
    I have a set of 3/4" drop solid motor mounts from TeamZ. They have never been bolted up. I bought them for a turbo system mock up in case I needed them. Didn't. The will fit a 302 or 351. Were $79 plus shipping. I will go $75 shipped. Derek - 678-920-2696 or PM me
  13. 351C/Big Block Engine Tech
    I have an 88' 5.0 that I have been thinking about dropping a bigger block in to it. My dad says put a 351 in it and stroke it to 383, but I thought if I'm going to do a motor swap I want to do something big. So, hypothetically, if I had a completely stock foxbody, what would I need to do to...
  14. Modular Engine Parts
    hey all, i am looking for a complete 4.6 shortblock 0r long block for my 2001. I am looking for something less than 70k miles. I live in the reading pennsylvania area. so the closer you live the better. it seems people arent selling around me or just arent advertising them. i really need one so...
  15. Modular Engine Parts
    I have a IAC motor in excellent condition for sale. Works perfectly fine. I also recently cleaned it out with a rag & carb cleaner. $25 shipped
  16. Windsor Engine Parts
    Looking for a motor built for boost. I'm not making anything crazy but need something that can handle a little more than the stock block. Also would like something with some pistons that will work with twisted wedge heads. Hope to see some motors! Thanks,
  17. General Mustang Tech
    I have a 93 mustang 5.0 lx convertible I was able to get the new driver side motor mount done but I can't get the passenger side done because I can't get to the back bolt on the motor! Any suggestions on what to do??? Or how you did it? Thank you!!!!!!
1-20 of 64 Results
Top