Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Member Build-Up Projects
    Bought this coupe in December 2020. Had a ford racing 347 in it with a 3550 transmission. Managed to get 40 miles on it and it started knocking. Sounded like an old 7.3 🤦‍♂️. Talked with the wife and a shop I know for building killer engines. $40,000 later, I have a ton of parts and still no...
  2. Drivetrain Parts
    Built Ford fox body 8.8. 5 lug Moser 31 spline C-clip eliminator axles with 3" studs, Ford Trac-loc differential, Richmond Gear 4.10, braced housing. New drums and wheel cylinders, shoes in good shape, could use a new hardware kit. Housing was mechanically stripped to bare metal (never really...
  3. Drivetrain Parts
    Superior Axle & Gear Evolution Series Hardened 28 Spline 4-Lug Axles Fox Length P/N "EV81-28" New in box, never installed. $210 shipped to the lower 48. PM me for fastest response. Thanks
  4. Drivetrain Parts
    I bent one of my Superior 31 spline axles (not superior huh?) and Id like to pick up another if anyone has one. Doesnt have to be superior brand, can be strange, moser, yukon, etc since I don't mind mismatching.
  5. Drivetrain Parts
    I have a set of brand new Moser 31 spline axles "Saleen, SVO, Mark 7" length @ 30 3/8" with studs. I bought them off summit about 3 years ago when I built my rear. The car has been in restoration and I've decided to put a different wheel tire combo on the car and in doing so, need to get a...
  6. General Mustang Tech
    I have read around and it seems that the Moser M9 does not work well with the fox body mustangs. " Has Moser corrected the Issue." I also know asking moser might not be the answer i need, if the IC is off and they have not fixed it im not sure they would give the right info. The problem from...
  7. Drivetrain Parts
    I have for sale a pair of fox length Moser 28 spline 5 lug axles. They are in great shape and have never been tracked. They are currently on my car, but it is not driven so I can have them off if interested. Asking $210 obo. Thank you!
  8. Drivetrain Parts
    stock gears out of 88gt perfect condition, car had about 120k on the clock when swapped out, no noise are perfect. 45 shipped. email me [email protected] i have feedback on ebay as canela427 and on as fernando427 thanks
  9. Drivetrain Parts
    Moser 33 spline axles with with ARP studs (5x4.5 & 4x4.25 bolt pattern). Axles are 27 5/8" long and have a small Ford bearing pressed on. $250 shipped My 8.8 housing is cut 1 3/4" on each side and has Moser #7700 8.8 non-c-clip ends.
  10. Drivetrain Parts
    Selling a set of 31 Spline Moser Axles. These are 4-lug and come with C-Clip Eliminators. The studs will need to be replace as a couple are missing. Otherwise, these are in good condition and the splines look good. Will try to post pics soon. For now, PM for pictures. $250 shipped. PayPal...
  11. Drivetrain Parts
    3.73 or 4.10 gears and Moser axles I am looking to buy a set of 3.73 or 4.10 gears. Doesn't matter which brand or if they are new or used. I also would like to buy Moser 31 spline axles. I need 5 lug for the 8.8" rearend. These are both for a 2000 Mustang GT. If you have either of the...
  12. Drivetrain Parts
    SOLD SOLD SOLD SOLD 8.8 Fox body rear. 58 1/4" wide from wheel mounting surface on rotor hat to rotor hat. Brand new small 9 inch ends with fox Mustang bolt pattern. Brand new Moser 35 spline axles with brand new 5/8" stud kits including spacers and brand new small 9 inch...
  13. Drivetrain Parts
    I have a whole bunch of rear end parts that I need to sell. All for a fox: 8.8 housing with no gears or carrier drum to drum make an offer 31 spline Moser axles 4 lug with 3in studs SPF Moser 31 spline spool SOLD Moser c-clip eliminators NEW $120 UPR diff cover girdle power coated black NEW...
  14. Drivetrain Parts
    We are an authorized distributor for Moser Engineering. We will beat any quote on Moser Products..GAURANTEED!!! Two day turn around on most orders. Axles, spools, c-clip eliminators, bearing kits...we have it all. Send us a pm today for a differential package that will hold up to the demanding...
  15. Drivetrain Parts
    I have a set of 31 spline 5 lug axles.They are stock length for fox body. These are brand new still in the box. I sold my car and I never installed these. The price is $225 shipped. I will send pics if you want them. I am not sure how to put them on here. Thanks.
1-18 of 18 Results