Hey guys, been awhile since I have posted on here but going to re-post this from some time back and hopefully make someones day. I have an mmr 900 engine, build sheet pic is below that has been sitting garaged on the engine hoist for a few years. I am in the process of moving, and its obvious...

I'm not much for write ups, I'm posting up what I have done so far with a pile of pictures for anyone who may have an interest. ENJOY. This is for anyone who cares to see how I chose to swap the Navigator 5.4 DOHC into my 2000 v6 convertible. Started as a plain 3.8 automatic 2000 Mustang...

i found these cam cap bolts on the MMR website, and had some questions. PN#400028B MMR cylinder head Cam cap/retainer bolts 4V/DOHC MMR Cylinder Head Cam/Cap retainer bolts 4V/DOHC 400028B $59.99 $59.99 Are they reusable or TTY? Is it for both heads or just one? What size Allen head and do...

Hello I have a MMR900 w/ following: •Standard Bore -18cc Dish Pistons (Stock Compression) + Cast Iron Block •Forged 8 Bolt Crankshaft (I will include flywheel if u need) •Manley 594200 Pistons •Teflon Treated Piston Dish ($250 Upgrade!) •ARP Mainstuds ($150 Upgrade) •ARP2000 Rod Bolts on 4340...

hey MMR, I have a 5.4 navigator motor and I was wondering what would be my options on boring out the block to at least a 351. what are the best ways to do this for a FI engine. I just want a strong block with a few extra hidden cubes. I know you guys now make the 351R which is 330 based and wet...

Looking to pursue a built six speed, so I am looking to part with my five speed. It is new in box, only removed to take a picture. Info on the trans from MMR: This transmission has the .64 OD This is our street/competition transmission and the same that we use to hold the current record...

As a FYI for those looking for a shortblock, longblock or KB supercharger MMR still offers the layaway program for those that would like to take advantage of it! Simply pick your product and put down 25% and take up to 1 year to pay it off with no fees or interest! Please let us know how we...

So I know I just bought this car, but it's come to my attention that I may have to move yet again, and this thing will not pass inspection. Additionally, I need a "daily driver" and regret selling my truck. So I'm just going to post this the same link that TCUDave posted. I've drove it a...

I have changed directions with my 67 Shelby Clone, and no longer plan to turbocharge it. The kit is located in Easton, PA. I should be able to get updated pictures by this weekend. I bought everything from a friend who built it and put approximately 500 miles on the car, and made about ten...

Up for sale is my 2000 Atlantic Blue mustang GT. This car has LOTS of modifications and has been great to me but I'm getting a new car so she needs to go. The facts: 2000 Mustang GT - Atlantic Blue with grey/charcoal leather interior. 71k miles (on the body) Clean title and carfax Engine...

Im in the process of making major investments into my drivetrain, in order to handle the disgusting amounts of horsepower I envision making in the future. Ive already swapped out an outdated 8" with a braced 9" with a 35 spline spool and Moser axles. The car is currently running an ancient...

SOLD!

Just had my car dyno tuned by Mike at DEZ racing and the numbers are very impressive. 300 HP and 333 ft/lb of torque. Mike had my car dialed in after only 3 pulls and the car runs better than when I bought it stock. If you look at the graph you can see that the PI intake cannot keep up with...

SOLD!

SOLD!

OUR CURRENT SALE PRICING HAS BEEN EXTENDED THROUGH September 09'!! In an effort to keep up with the growing demand for our custom shortblocks MMR is now stocking select custom shortblocks ready to ship. HUGE SALE! Click below for current pricing or visit our site! Click below for our current...