Ford Mustang Forums banner
master cylinder
1-12 of 12 Results
  1. SVT & DOHC
    Hi all. I've found two other threads on this exact issue and no answers. I need to remove the brake master cylinder and booster from my '96 Cobra. No way will the bolts on this thing clear the firewall, because the front of the booster hits the strut tower. I have pulled up on it as hard as...
  2. Suspension
    87-93 Refurbished Master Cylinder and Brake Booster 85.00 + Shipping TITLE IS INCORRECT AND WONT EDIT, THIS IS FOR 87-93 Took these out of my 1989 Mustang GT to upgrade to a more modern disc setup. Everything was in perfect working condition upon removal and was thoroughly flushed of...
  3. Miscellaneous Mustang Parts
    Mine took a crap. Engine revs up when I hit the brake and I can hear air leaking. Can't drive car until I get one. Just looking for a stock power brake booster for an 88 GT Text 848-210-7714
  4. General Mustang Tech
    The car is an 87 GT, I need to replace the drivers side brake line coming off the stock/original master cylinder and going to the brake hose in the fender. The line comes out the bottom of the MC and proceeds directly to the left-front disk brake. I am replacing the original master cylinder...
  5. Miscellaneous Mustang Parts
    Chrome Plated Master Cylinder cap for your 1979-1986 Mustang (NOT SVO), open and thats when I found out it was too damn small for my master cylinder. $10 shipped. Paypal required
  6. General Mustang Tech
    OK, so I'm new on the forum, but not new to stangs. I just recently swapped nearly everything from a donor 87 into my 83. The problem area is the brakes. All was functional on the donor car. After bolting in ALL brake components, lines, booster, calipers, master cylinder, etc, I proceeded to...
  7. Suspension
    Strange master cyl. w/ firewall manual brake adapter for a fox. Used two years - in good condition. Do not have the push rod available. asking $80.00 + the ride / paypal ok [email protected] / 405.317.5247
  8. 94/95 Tech
    Hey Guys, I'm looking to upgrade my master cylinder following a front/rear brake upgrade. I'd like to use the 94/95 GT MC but after looking at some pictures of this part, I'm curious about something. Does this MC bolt to the brake booster at an angle (front tilted up)? The fluid reservoir...
  9. General Mustang Tech
    I have a 95 mustang and wanted to install 99-04 Mustang 99-04 Gt Front Calipers. Are the caliper brackets the same with the on the 95 and the never 99-04 style brakes?
  10. Suspension
    Sold Strange Master Cylinder (manual) - Strange p/n B3359 1 1/8” bore; Excellent condition. Only used for about 250 miles and then I switched to the smaller bore M/C. The B3359 goes for $99 new. Click on the image below for a much larger pic.
  11. General Mustang Tech
    I am using a dual diaphragm brake booster out of a 99 v6, but i can not get the studs through the original firewall holes. How do i need to modify the holes to get the booster to fit ? My car is an 86
1-12 of 12 Results
Top