Ford Mustang Forums banner
maf
1-20 of 152 Results
Advanced
  1. Fuel System & Related
    Selling my 3" PMAS blow through MAF sensor. Only has a few hundred miles of use. Went to full stand alone and speed density so don't need anymore. Has adapter connector for Fox Body style MAF, uses the newer style Ford MAF sensor with integrated IAT sensor that can be wired up for charge air...
  2. Fuel System & Related
    Looking for a SCT BA2600 or SCT BA3000 Mass air flow meter in 90mm housing. Thank you
  3. Electronics and Entertainment
    Looking to sell as a kit. Included is a PMAS 75mm mass air flow meter attached to a 8" Anderson Power Stack filter, calibrated to a set of (8) original and authentic Ford / Bosch green top 42 lb fuel injectors (280-150-588 part number). Everything is in excellent condition with very few miles...
  4. Fuel System & Related
    Have a set of trick flow tfx 44lb high impedance fuel injectors. Had these on a 347, only removed to step up to a bigger injector. All are In great working order and have less than 5000 miles on them. Idle like stock if you tune for them. $250 for injectors Also selling a pro-m 80 MAF. Bought...
  5. Electronics and Entertainment
    I'm making some changes to my setup and going to be switching over to another engine management system. With that being said I'm looking to sell off what I'll no longer be needing. What I've got: Moates quarterhorse tuner, as well as the necessary cables. This will come with the dongle and...
  6. GT & SOHC
    Posted this in supercharger forums as well.. Hey guys I've been battling this problem for awhile now and haven't had any luck at all, I'm going to run you through my set up first and go from there My Car: 1999 Mustang GT Mods: Vortech V1 T-Trim, 3.33 Pulley, BBK 78MM Throttle Body, 42#...
  7. Fuel System & Related
    I am looking for a few things for my 1989 Mustang GT: 1. working set of eight 24 lb injectors 2. maf that's tuned for the injectors 3. IAC valve 4. EGR valve Thank you!
  8. Fuel System & Related
    42Lb Greentops and PMAS calibrated 325 shipped brand new lightening mass air with conversion pigtail $110 shipped Pro-M 77 with 36Lb Supercharged calibration, 150 shipped ALL SHIPPING TO LOWER 48 ONLY
  9. Power Adders For Sale
    Hey Corral, I want to sell my intercooler kit that I bought a month ago from CX racing, no cutting is needed, you can also keep your Bumper Support, will fit perfectly with Mounting Brackets. Its a complete kit that includes: Intercooler + Oil Cooler + Bracket + Piping + Silicon Hose + Clamp +...
  10. Windsor Engine Parts
    Fiveology Stage 3 MAF conversion kit NIB. Comes with A9P computer, overlay injector harness, 76mm MAF sensor and sample tube. This kit was intended for my Lightning but I decided to stay SD and supercharge it so this must go. This kit lists for 799.00 new from Fiveology, I'll take 750.00 and...
  11. Fuel System & Related
    Wanting to buy a SCT BA-2400 or BA-2600 & a Tial Q 50mm 2psi Text me at 803-834-9977 for fast response
  12. Modular Engine Parts
    Wanting to buy a SCT BA-2400 or BA-2600 & a Tial Q 50mm 2psi Text me at 803-834-9977 for fast response
  13. Power Adders For Sale
    Wanting to buy a SCT BA-2400 or BA-2600 & a Tial Q 50mm 2psi Text me at 803-834-9977 for fast response
  14. Fuel System & Related
    SOLD: 76mm C&L MAF for 24lb injectors stroked the motor and went bigger. I take care of my stuff and this MAF looks great and works just fine. Regularly cleaned, carefully, with electronics spray. According to Pro-M, you can safely make 650hp with this diameter MAF. Combine it with the...
  15. Fuel System & Related
    stroked the motor and went bigger. I take care of my stuff and this MAF looks great and works just fine. Regularly cleaned, carefully, with electronics spray. According to Pro-M, you can safely make 380hp with this diameter MAF. Combine it with the original 1993 Cobra 24lb injectors (see other...
  16. Turbochargers
    I have a pro-m MAF I've been sitting on. Its a Univer model blow-thru calibrated to 42lb injectors. Wondering if anyone uses this unit in a turbo setup and how they like it. I'm looking to get an on3 kit for my foxbody. Will run max 10lb boost. image of MAF -> http://i.imgur.com/muYdDKj.jpg
  17. Modular Engine Parts
    I have some 6&8-ribbed pulleys. Also have a set of COPs with about 5,500 miles. Replaced with WeaponX. All prices need to add PP fees. Shipping is free. Different sizes as described by names. https://drive.google.com/file/d/0B6NlbZzWOkJiMHd2S201RjZzX1U/view?usp=sharing COP: $35 Keyed...
  18. Fuel System & Related
    SOLD!
  19. Fuel System & Related
    Nice used C&L cast intake tube. Boss is drilled and tapped 1/16npt for nitrous nozzle, just screw in a plug if you don't need the hole. $55 shipped
  20. Fuel System & Related
    Older Pro Flow 75mm chrome bullet mass air meter for 36lb injectors. There is a s/c after the 36lb so I assume its for a supercharged application. It worked fine for me for years with 36lb FRPP injectors and a Kenne Bell blower with an A9L computer. Car ran great untuned, no idle surge and afr...
1-20 of 152 Results
Top