5.0/302 Roller Lifter Valvetrain/Cam Components
Listed are Ford 5.0/302 roller lifter Valvetrain/Cam components including: lifter guide plates, guide plate retainers "spider", roller lifters, and pushrods. There are 16 roller lifters (+1 spare). I was actually collecting these parts for a 5...
TFS Hydraulic roller Link-bar lifters
I have a set of TFS hydraulic roller link bar lifters for sale. I bought this lifters from a guy on hardcore50racing last year. They only have motor break in time and one 1/8 mile pass. I had one pair of lifters to mess up so I only have 7 pairs. One pair...
Here's the NA Build
427w (4.125 x 4")
9.5" Dart SHP Block
Hydraulic Roller Cam...approx 235/245 and a little more than 0.600 lift
10.7:1 Static Compression
I need some lifters that will be good for up to 6500-6800 RPM. I own the factory Ford dog-bone retainers but linkbar lifters...
I have a set of 16 roller lifters that came out of a 70k mile 1994 COBRA. I bought these lifters with the intention of using them on my build but decided to go with comp lifters instead. There is nothing wrong with these lifters, they have been bagged and oiled since they were taken out of the...
Brand new set of 16 hydraulic roller lifters. These are the 2nd gen version with Eaton oil metering and beefier internal spring setup. Same lifters Ford Racing, Comp Cams and others sell for double the price. IMHO the best factory style hydraulic roller lifter you can buy. Made by Elgin part...
I have a 01 Gt that is rattling sound coming from the passanger side head, I think it is in the lash adjusters/lifters. It only does it after the car warms up. and does not seem to change with rpm. I have removed the lash adjusters, is there any way to tell if they are bad? Thanks.
Bought a shortblock that was put together and never fired. I am going a different route and will be using Retrofit lifters and will not be using these. These were installed, but motor was never run. $65.00 These are new!
Elgin Roller Lifters HL-2205s Brand New in Box
Set of Elgin HL-2205s roller lifters (16 pcs) brand new in boxes. They are made with Johnson/Eaton bodies, better internal springs/check valves and higher quality roller bearings - a significant upgrade to the sloppy oem pieces. Many companies...
Just seeing if there's any demand for this stuff.....considering going back to a hydraulic roller setup.
COMP Cams XR286R Solid Roller
248/254 dur. @ .050"
286/292 adv. duration
.614"/.621" lift w/ 1.6 rockers
3000-7000 recommended RPM range....it really hits hard...
Buyer beware. I just want everyone to know the hassle I just went through with no help what so ever. I purchased a set of Ruben Racing Cam's hydraulic roller lifters. It took me bit to get the motor together. I put about 1200 miles on my mustang since the install. I just installed a new clutch...
Just a feeler ad here, still have the parts buried somewhere in the back of the garage....
Stage 3 Trick Flow roller cam, with conversion hyd. roller lifters. Will fit 289/302/351 blocks of any year, as long as they have stock diameter lifter bores.
.574"/.595" w/ 1.6 rockers
236/248 dur. @...
Recently did a carb conversion on my 91 5.0. I figured it would be a good time to put new lifters and pushrods in. When I finished up the motor, and fired it up- the lifters and or rockers were clattering. I thought that maybe the lifters had to prime. After about 5-10 minutes shut the car off...
Set of 16 hydraulic roller lifters for Small Block Ford. Manufactured by Ford Racing. They were used for a few hundred street miles and then shelved. I bought them from him for a 306 I was building but life changes have necessitated their sale. They are Ford Racing model FMS-M-6500-R302...
EDELBROCK heads and covers, MSD distributor for sale. BRAND NEW, CHEAP
THE LIFTERS ARE SOLD BUT.... I HAVE MORE GOODIES!!
I have BRAND NEW never been opened Edelbrock 77189 Victor JR Cylinder Heads. I paid $1400 for them and would like to get atleast $1000 for them.
Victor Jr; Cylinder Head...
Performer RPM Camshaft & Lifters -price lowered
Performer RPM Camshaft Kit SB-Ford 351W
NIB, box never opened!
You Pay for shipping or I will deliver in chicago/milwaukee area
847 373 1979