I have an 88 MAF converted with the smog eliminated (none by me). Over the winter I was cleaning up the front end and saw horrible iron deposits in the rad and overflow. I removed both and rigged up some piping to fill and flush it as I couldn't use hoses it was so cold. After 3 weeks of...

Hi everybody, my 95 GT has been sitting in the garage since late November (I live in Connecticut and I have a daily for the winter), when I parked it all fluid levels where perfect and the car ran great. I started it a few times to just let the engine run, but never pulled it out of the garage...

Alright Corral, I’ve got a leak originating from the top of the oil return line. This is where it drains from the turbo. Looks like it’s going through the actual stainless steel braid close to where it meets the red anodized fitting after the oil warms up. Anyone have similar issues? Any...

Hey guys! I just picked up a 1995 Mustang GT as a project and I wanted to reach out to the community and start a thread discussing some of the issues I've come across. I'm only somewhat familiar with this motor, I had a 1991 F150 years ago that had the 5.0, but I will need a refresher on some...

I was checking out the sticky for leaking fuel lines. My recently purchased 94 is leaking and I want to replace the lines. I checked in with TrickVert who passed on excellent information. I think I am ready to order, was hoping for a blessing on the parts i have in the cart... these things are...

Hello everyone, friday as I was filling the tank in my 2005 mustang v6 4.0 automatic, I noticed that it left a puddle of fuel. I checked and didnt see any punctures in the tank or anything of that sort, also checked after driving it and no more leaks. Today I went to put more gas on it just to...

I have a 2003 Cobra with low miles. It has been sitting for about 5 months after a mild front end accident. After getting everything fixed, it was started for the first time last week and now has coolant leaking from the rear of the motor - or at least it appears to be leaking from the rear. The...

I have a 2003 Cobra with low miles. It has been sitting for about 5 months after a front end accident - the motor was not touched in the accident. After getting everything fixed, it was started for the first time last week and now has coolant leaking from the rear of the motor - or at least it...

Hello all! I replaced my heater core about a month and a half ago - it was leaking. I replaced all of the hoses and clamps as well. I got into it this morning only to see that it is leaking once again. Any thoughts? I read a post about electrolysis (sp?). The guy I bought it from definitely did...

Hi everyone, I changed my transmission fluid today and before i had got to 3.5 quarts fluid started leaking out. I jacked the car up drained the fluid, put the car back down on the ground and began to refill using a hand pump. It was a tight squeeze getting the fluid back in through the fill...

Never noticed a leak until the other day. This is what I'm seeing on the passenger side floorpan near the cat. Any advice as to where to begin looking would be greatly appreciated. (It's a 93 5.0 LX w/77k and I dropped the tranny a couple weeks ago to replace the clutch if that means...

I've been stalking corral.net for years, and always been able to find great info on whatever was getting me stumped- thanks everyone. Haven't signed up until today. Here's my issue... I have a 2003 Mach 1 with a D1SC and a slow rear main leak that's been bothering me for a couple years. Just...

My T5 has started leaking pretty bad. I can't tell where from do to all the fluid evrywhere. It is somewhere between the collector (BBK longtubes) and the crossmember on the driver side. I thought it was the speed sensor but not 100% sure. I might have to drop the tranny and degrease it and hope...

My garage queen 7 up 'vert developed a small radiator leak while sitting in the garage this winter. When i removed the radiator cap, there was a Dirty looking foam on the top of the anti freeze. I panicked and thought the head gasket had blown. I pulled the dipstick and could only see clean...