Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 322 Results
  1. Windsor Engine Parts
    Looking to buy a non-EGR upper half of an Explorer / Mountaineer intake. I already have a lower and throttle body. Just need the upper half. Bare/unpainted preferred, but painted isn't a deal killer. If painted it needs to be cheap to offset the time and effort to get it blasted. I'm in...
    $1 USD
  2. Modular Engine Parts
    Recently installed a cold air intake in my 98 Mustang, so I’m looking to get rid of the old stock set up. The K&N filter was bought back in April, and has less than 200 miles on it. Everything is there except for the MAF sensor which I am still using on my car. $75obo. Open to trades for other...
    $75 USD
  3. Windsor Engine Parts
    Holley Sniper Sheet Metal Dual Carb Tunnel Ram Intake Manifold Ford 302 Part #827072 NEW - never been mounted. Very light. Made from sheet aluminum. Really cool high performance unit. 425.00 + actual shipping Text or call Paul - 541-292-3800
    $425 USD
  4. Windsor Engine Parts
    searching for a good condition 94-95 cobra intake manifold.
  5. 5.0/5.8 Engine Tech
    Morning, I have a 1992 Mustang GT 5.0 and decided to changed out my valve cover gaskets. During this process I installed new hoses on the intake, due to cracks. Now that I've put everything back together, the car will crank, but will not stay running. It'll fire up fine, but will not idle. I've...
  6. Windsor Engine Parts
    Extrude and Honed lower. upper and lower are both powder coated black. No issues worked like a boss. Price is firm. Came off boosted 302. Throttle body not included. Please email stpet291 @ gmail.com
    $625 USD
  7. 5.0/5.8 Engine Tech
    Best cylinder heads/intake manifold money could buy back in 1992?
  8. Modular Engine Parts
    WTB parts from MACH 1/ 99-01 COBRA: 1. full intake tube and Tb mach1 / cobra 99-01 with iac and throttle cables 2. Mustang GT Pcm + PCM harness (manual transmission) 3. Transmission 3650 swap kit 4. K member spacers ( Maximum Motor sports 1/2" k-member spacers. )1,5” + 4.6 engine mounts 6. fuel...
  9. 5.0/5.8 Engine Tech
    I think I’ve decided on the emissions legal afr 185’s like these although I’m open to suggestions for any emissions legal heads that might be better. Anyway I’m starting to look at emissions legal intakes and fuel rails/injectors. I need to decide on the upper and lower intakes and also the kind...
  10. Windsor Engine Parts
    Hey All, I've been looking for a 9.5 351w Carbed Super Vic intake. Part# 2924. Can't seem to find one anywhere. If anyone has one for sale, please let me know. I'll gladly cover shipping. Thanks!
  11. Windsor Engine Parts
    Selling the heads and intake off of an explorer. The heads are gt40, non P heads so they’ll fit all standard sbf headers. They make a great upgrade over factory e6 or e7 heads. $400 for everything, located in savannah, ga. Would strongly prefer to sell everything together. not really looking...
  12. 5.0/5.8 Engine Tech
    I'll be dropping in a 351W soon into my EFI 88 GT Mustang. I recently purchased an Aeromotive A1000 5.0L Mustang Stealth System AEI-17130 fuel system kit. The tech guy said that whatever intake i choose, it must maintain the angled injectors like the stock 302 or stock 351W intakes. Would you...
  13. 5.0/5.8 Engine Tech
    aquiring parts to start building my 89 302 up future plans for the car are to run an on3 76mm turbo kit, I have a set of TFS 192 highport heads, trick flow port matched upper and lower intake, 1.6 RR's however im stuck deciding between a cam, maximum valve lift on the heads are .600, does that...
  14. Modular Engine Parts
    Hoping to find one that hasn't been grinded on or anything. Looking for the upper and lower set. Using on a 363 build by Fordstrokers. Send me pics of what you got. Thank you
  15. Windsor Engine Parts
    Bought this a little while ago. Not opposed to using it, just that in kinda married to my current setup with all I’ve got into it. It’s meant for a rear throttle body setup, buts it’s sheet metal aluminum so it could be modified to work. Head is ported to a victor Jr style head, but will work...
  16. 5.0/5.8 Engine Tech
    So I am about to start modifications soon, trying to decide between the Trick Flow Track heat stage 2 kit or piece together an Edelbrock RPM2 and Edelbrock parts mimic the Trick Flow kit. What are your thoughts?
  17. Windsor Engine Parts
    For sale is a Edelbrock Victor EFI intake, pt # 2945, intake for sale. I bought used but appears to be in good condition. SOLD.
  18. Windsor Engine Parts
    Trickflow track heat intake for sale. In great condition. Used for 1 summer and switched to a bigger intake setup. Only hardware that will come with is the pcv fitting and some vacuum ports. $425 Shipped. Intake is off and ready to ship.
  19. Windsor Engine Parts
    Like the title states. Looking to trade my Vic 5.0 efi intake for a Trick Flow R intake. Will entertain offers on the intake as well if anyone is interested. Some shop in Florida ported the lower but it is not perfect. Upper is stock. 450 shipped to your door in the lower 48 on my Victor intake...
  20. S197 and Coyote Parts
    I really just need the snorkel part that connects between the grille and the main box. But I'll buy the entire box as long as that piece is included. Thanks! JB.
1-20 of 322 Results
Top