Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 215 Results
  1. 5.0/5.8 Engine Tech
    My next moves on my car now that it's running well is eliminating the weakest links, my car is somewhere in the range of 300-320HP, ive gotten a basic tune but no dyno tune. I currently have a GT40 Intake, GT40P Heads, cold air intake, 70mm accufab throttle body,. Im looking to replace the stock...
  2. Fuel System & Related
    deashworks 78lb ev6 plug short injectors with adapters to make them long. under 3000 miles on them siemen deka 60s ev1 plug with under 500 miles on them 310 shipped per set
    $310 USD
  3. Windsor Engine Parts
    80mm PMas MAF calibrated for 42# injectors. Upgraded to the Holley Terminator X and no longer need with speed density setup. Comes with Foxbody adapter. Condition is good, just a couple snags from sliding into fender well. $200 + shipping from Kansas City. Call/text for questions 816-977-5047...
    $200 USD
  4. Modular Engine Parts
    Hoping to find one that hasn't been grinded on or anything. Looking for the upper and lower set. Using on a 363 build by Fordstrokers. Send me pics of what you got. Thank you
  5. Fuel System & Related
    Ford 30lb injectors, new o-rings. Set of 8. Just took off my 5.0 because I supercharged and went up to 42's. $125 shipped OBO Message or text (816)977-5047
  6. Windsor Engine Parts
    42-LB Injectors EV1 style, SBF, Ford Mustang Summit Racing 42-LB injectors (set of 8), only used for about 1000 miles before I went with bigger units. Work perfectly. For Ford Mustang, small block, SBF, Windsor, 347, 408, 331, stoker. Paid $340, asking $160 shipped to lower 48 states. Good for...
  7. Electronics and Entertainment
    Hey Guys, Like new C&L 76MM Mass Air Meter 80.00 Shipped SN95 Distributer in usable shape. Includes, TFI module, cap and rotor. 40.00 Text Paul 541-292-3800
  8. Fuel System & Related
    I am looking for a few things for my 1989 Mustang GT: 1. working set of eight 24 lb injectors 2. maf that's tuned for the injectors 3. IAC valve 4. EGR valve Thank you!
  9. Fuel System & Related
    42Lb Greentops and PMAS calibrated 325 shipped brand new lightening mass air with conversion pigtail $110 shipped Pro-M 77 with 36Lb Supercharged calibration, 150 shipped ALL SHIPPING TO LOWER 48 ONLY
  10. Fuel System & Related
    120 injector magnum fuel pump 625 and 10an fuel filter $1300
  11. Fuel System & Related
    SOLD: ORIGINAL 1993 Cobra 24lb injectors, great condition. stroked the motor and went bigger. I take care of my stuff and these look great and work just fine. They were put into a zip-lock baggie while still wet so they wouldn't dry-out. According to Pro-M, you can safely make 426HP NA, 329HP...
  12. Fuel System & Related
    I have a set of brand new ID1300 injectors for sale for 07-14 GT500's. These may fit other applications. Part# 1300.48.14.14.8 $1400 shipped
  13. Fuel System & Related
    PMAS calibrated for 80lb injectors has pigtail for 87-93, Big mouth UPR filter. 100 shipped email me [email protected]
  14. Fuel System & Related
    Looking for a good set (8) of 60lb injectors for my foxbody, PM me with prices, also looking for maf blow thru calibrated for 60lb injectors.
  15. Fuel System & Related
    I am selling a set of fresh pull out 60lb mototron, siemens deka injectors. I would say these have about 500 street miles, 3 quarter mile passes and a handful of dyno runs on them. They are in perfect working condition. I went carb and that is the only reason for selling. I am asking $225...
  16. Electrical & Wiring
    2001 Mustang refused to turn over one day. Replaced fuel pump, fuel filter, battery, plugs. Lots of gas, lots of spark, lots of power, can start w ether for a few seconds. Relays? Which one(s) most suspect? This car is killin me. Thanks
  17. Fuel System & Related
    I have a set of EV 1 Bosch 38 Lb Injectors Very Low Miles. Under 500. Missing some O-Rings... $200.00 [email protected] paypal
  18. Windsor Engine Parts
    LOWERED PRICES! 351W EFI Motor Part-Out I'm selling my complete 351w EFI package. SOLD SOLD SOLD - Edelbrock 351w Performer RPM EFI Intake -SOLD SOLD SOLD 95' 351w Roller Short Block- Well used but in good usable shape, never raced. All clearances are factory. 400.00 pick up only CNC Power...
1-20 of 215 Results
Top