Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 48 Results
  1. 5.0/5.8 Engine Tech
    I have a 92 tbird 5.0 (same as 94-95 fox) and I am making a custom intake to adapt a M112 and need some help/info with injectors. I am planning on making in the range of 400-500FWHP and im not sure what size injectors to get. I will need to weld in bungs in my intake so the kind of injector...
  2. S197 Mustang (2005-2010)
    I have a 2007 mustang gt and have been getting a misfire for cylinder 1 I have replaced the spark plug the coil pack and injector but even after I replaced the injector if I pull the wire to the injector the idle does not change like all the other cylinders. I am trying to figure out y it would...
  3. C&L Calibrations.JPG

    C&L Calibrations Tube Color Code
  4. Fuel System & Related
    Have a set of trick flow tfx 44lb high impedance fuel injectors. Had these on a 347, only removed to step up to a bigger injector. All are In great working order and have less than 5000 miles on them. Idle like stock if you tune for them. $250 for injectors Also selling a pro-m 80 MAF. Bought...
  5. Fuel System & Related
    Set of 8 Accel 24# injectors took off during my Vortech upgrade, less than 10,000 miles on them, like new. Asking $175 shipped in USA. * Injector Advertised Flow Rate: 24 lbs./hr., 255.0 cc/min * Injector Impedance: 14.4 ohms * Driver Type: 12V saturated circuit * O-Ring to O-Ring Height: 2.520...
  6. Fuel System & Related
    Looking for 60# Jetronic/Minitimer style injectors with EV1 style connector. Message me price shipped to 21629. Thanks for any help!
  7. Windsor Engine Parts
    Hey guys i'm going carb so I won't be needing these pieces. 500km on everything, came off a 347 sbf. -Edelbrock Performer EFI Intake Manifold Upper & Lower 3821 Comes with all hardware as well as gaskets. $600obo -BBK Cold Air Intake w/76mm c&L maf Comes with maf, all clamps, air filter...
  8. 5.0/5.8 Engine Tech
    So im a little confused as to what design lll injectors will work in my mustang. I recently bought a set of injectors from a 96 ford explorer with part numbers f6ve-a5a except for one which was f4se-a1b. From my reading and research these injectors come from explorer v8 from 96-98, 94-95 crown...
  9. Fuel System & Related
    Brand New Ford Racing 42lb injectors never installed Not sure what these go for used anymore so I'll start at $200 shipped..or make reasonable offer Lucas 38lb injectors - These were only used for a dyno day - wasn't enough fuel so these were pulled off for bigger ones $200 PN# on them is...
  10. 5.0/5.8 Engine Tech
    Ok guys, Im not sure this is the right section but i'll give it a whirl anyways. I have done a fair amount of research and am getting mixed signals and a little confused to be honest. I'll try to give as much info as possible so hopefully you guys don't have to do much searching. I'm looking...
  11. Fuel System & Related
    I have a set of 8 injectors new in box they are 30lb Accel. Never installed. They are currently going for 273.99 on american muscle. Accel High Performance Mustang Fuel Injectors - 30lb 150830 (87-04 V8) - Free Shipping Looking to get 190 O.B.O. for them.
  12. Fuel System & Related
    These adapters are for 14mm o-ring size (domestic) injectors and add 1” to the overall length, so they convert a short injector (2” OAL) to a long injector (3” OAL). 8 black anodized extensions, 8 clips, and 16 o-rings, new, $75 shipped. [/URL][/IMG]
  13. Windsor Engine Parts
    They were professionally rebuilt and never ran. Im asking $80 Text me for any questions 714-496-7154.. i dont check this forum often.
  14. Fuel System & Related
    I have a brand new set of green top 42# Injectors and a new C&L calibrated 80mm MAF for $250 or trade for a set of 24# injectors with a calibrate MAF body. Was planning on a Turbo Set up, but now doing NA and injectors are too big for what I have.
  15. Fuel System & Related
    like the title says I have some ford racing 30lb injectors and a pro-m maf calibrated to 30lbs for sale. comes with the pig tail for round to flat hookup. still attached to rail from a 94 gt so If you want that too its no extra charge. all of it together 140$. I can send more pictures if you...
  16. Fuel System & Related
    SOLD! 80MM Pro M meter, Rails, 30lb FMS injectors & Holley FPR I am selling a set of stock fuel rails with 30lb Ford Motorsports injectors and a matched 80mm ProM mass air meter for a Mustang 5.0 1986-95. The K & N filter is included but has a small tear. Also included is a Holley Adjustable...
  17. Modular Engine Parts
    We are having a sale on our 60lb and 80lb injectors. contact [email protected] for pricing
  18. Modular Engine Parts
    Siemen's Deka - 60lb and 80lb injector SALE ! In stock ready to ship. Bosch's & Siemen Dekas #1 Distributor for fuel injectors. Contact Mike for the lowest prices email [email protected]
  19. Fuel System & Related
    MMP Sale on 60lb and 80lb injectors. email [email protected] or call for pricing. in stock ready to ship.
  20. Modular Engine Parts
    MMP Sale on 60lb and 80lb injectors. email [email protected] or call for pricing. in stock ready to ship.
1-20 of 48 Results