Ford Mustang Forums banner

hydraulic

  1. Windsor Engine Parts
    I have a NiB crane 449561 camshaft for sale. Gonna go ahead and have a custom one cut so this one is available. Retails in the 410ish range. Will do 275 on it. 563/584 lift and 232/240 @.050 on a 112 line if interested in pics shoot me a pm the other your # and I'll shoot all you want.
  2. Windsor Engine Parts
    SOLD
  3. Windsor Engine Parts
    Hey guys, i bought the wrong springs, duhh., New in the box. These are for good for most street strip hydraulic roller cam applications on most standard ford performance heads. 85 shipped Thanks, Paul 541-292-3800
  4. Automotive Tools
    Works good for manyy diff uses. Good shape Can take pics tomorrow $150
  5. 5.0/5.8 Engine Tech
    Here's the NA Build 427w (4.125 x 4") 9.5" Dart SHP Block AFR 205s Hydraulic Roller Cam...approx 235/245 and a little more than 0.600 lift 10.7:1 Static Compression I need some lifters that will be good for up to 6500-6800 RPM. I own the factory Ford dog-bone retainers but linkbar lifters...
  6. Modular Engine Parts
    SOLD SOLD
  7. Windsor Engine Parts
    Bought a shortblock that was put together and never fired. I am going a different route and will be using Retrofit lifters and will not be using these. These were installed, but motor was never run. $65.00 These are new!
  8. 5.0/5.8 Engine Tech
    I measured using the length checker. I did a 1/2 turn on the rocker nut and I got the measurement 6.417. Now im confused...Should I go with 6.400 pushrods or 6.375 to compensate for the lifter preload, or doing the 1/2 turn already preloaded the lifters and I should just order the 6.400's ...
  9. Drivetrain Parts
    Selling my Tremec T56 6spd transmission, this is the aftermarket T56 made to bolt up to the 302/5.0 engine. Trans has about 500 miles on it and is perfect. All shifts are nice and smooth, very tight trans. Comes with a Steeda Triax shifter for nice short shifts and a hydraulic clutch actuation...
Top