Ford Mustang Forums banner

holley

  1. Windsor Engine Parts
    Going on my 90 bronco 351w Holley Term X setup. Need a cd box for ignition control. Thanks
  2. Windsor Engine Parts
    I have a old school Downs upper intake with gt40 lower that has port work done to the head side. Also comes with 1" spacer. Works as expected. Very similar to the Ron Anderson (Anderson Ford) RAP intake. These were commonly referred as a "breadbox" intake. Private message me or text me for...
  3. Windsor Engine Parts
    I have a tmoss ported intake. its still on the car. no damage or stipped bolts. I have paperwork showing before and after flow numbers. flows better then a holley systemax out of the box. I have had this intake for the last 10 years. 500.00 if picked up near St louis Mo. will...
  4. 5.0/5.8 Engine Tech
    looking into the 351 swap and need advice on some parts. for those of you have done the swap what heads, cam, and intake set ups did you use? looking for decent power gains and idle doesn't make a difference for me just trying to make some good memories with the kiddos. thanks
  5. Windsor Engine Parts
    I've got a 70mm Holley Tb with a bbk/edelbrock spacer. Spacer has poor man egr delete and has the bottom bracket bolt cracked on spacer. Tb operates flawlessly but spacer does have a bad bolt hole for the bracket. 160 shipped. That's right at half price for the Tb before the 10 bucks to ship. If...
  6. 5.0/5.8 Engine Tech
    Hello everyone. today i opened up a Mighty Demon 850 i bought as "new" and discovered that the carb had been gutted! No floats, no jets, no powervalve and most of the small brass plugs and bleeds are gone. The pics here show what i have and i am trying to figure out what is missing and how to...
  7. Electronics and Entertainment
    $900 OBO Davis traction control / wheel spin management system for Holley EFI/Dominator. Brand new, never used. Still in shrink wrap. Going a different direction. This is the self learning unit. Info on the TC2 EFI-TC2 Self-Learning-Automatically Adjusts For Changing Conditions Multiple...
  8. Fuel System & Related
    I have amassed a bunch of carbs that i no longer need because i am stepping up to a much bigger motor. 1. Holley 4776 600CFM Double Pumper with Manual Choke. Was totally rebuilt, no miles since. 150.00 obo 2. Edelbrock Performer #1407 750cfm. Needs to be cleaned but was working when pulled...
  9. Windsor Engine Parts
    I have a Holley 1050 Dominator for sale. Comes with braided dual feed line, throttle cable bracket and k&n air cleaner assembly. I'll take $600 for everything. Not splitting it up. You can PM me or call/text me @ 301-395-3921
  10. Fuel System & Related
    I have a Holley 1050 Dominator for sale. Comes with braided dual feed line, throttle cable bracket and k&n air cleaner assembly. I'll take $600 for everything. Not splitting it up. You can PM me or call/text me @ 301-395-3921
  11. 2.3L Engine Parts
    Weiand intake to fit a standard 4150 flange 4bbl carburetor to a 2.0 Ford. Wake up your Pinto! Nice condition. $150 shipped
  12. Fuel System & Related
    Up for sale is my quickfuel SS 750cfm with mechanical secondaries, down leg, and electric choke. It will come with a Holley blue pump and regulator, fuel like from pump to regulator, braided fuel line from regulator to carb. All this was brand new when purchased and only used it a few times when...
  13. Electronics and Entertainment
    Have had this in box for years. Basically brand new as far as use. Was not on car for long . Got FAST system so just went back to a basic MSD box. Make me a reasonable offer and it is yours. 608-575-4790.
  14. Windsor Engine Parts
    delete delete
  15. Windsor Engine Parts
    *NMRA RENEGADE HOLLEY SYSTEMAX UPPER AND LOWER INTAKE. *OVER $1300 IN PORT WORK ALONE. *POWDERCOATED BLACK AND DARK RED-ORANGE. *MIDDLE BOLT HOUSING ELIMINATED FOR MORE AIRFLOW, WILL INCLUDE FLUSH BOLT AND SCREW IN PLUG. *WILL ALSO INCLUDE 1" SPACER. *THREE VACUUM PORTS HAVE BEEN DRILLED AND...
  16. Fuel System & Related
    Below is a PARTIAL list of what I have. Message me or email me at [email protected] if you have any questions. Thanks guys! $100 each core! Will make a deal for bulk purchase!!! 1-1960's 1904 Holley 1 barrel 2- Holley 2 barrel 6r-1258-3 3-Rochester GM Quadrajet electric choke 4 barrel...
  17. Fuel System & Related
    I have MANY complete old 2 AND 4 BARREL, 94 (1939-1957 use) cores, NEW Judson Magneto in the box, and some rebuild kits. 1963 Falcon carb, Motorcraft with electric choke, Autolite, and plenty of Holleys. Also have plates, coils, brand new modules, and a/c pump FOMOCO. People use these on classic...
  18. 5.0/5.8 Engine Tech
    I currently have a holley systemax 2 intake on my 94 cobra, but I really like the 4150 style lower intakes with an elbow. How would the performance compare between those two setups in a somewhat aggressive h/c/I, full bolt on car?
Top