Search Results for ‘help please’

Hello I recently got a 93 gt 5.0 gt40p heads gt40 intake and it has 30lb injectors also a pmas calibrated 30lb maf with a powerdyne 6lb supercharger running 6lbs of boost msd boost controller with retard knob to control boost timing Base timing is at 10.... Now I have it running ok but idle...

So I decided to do the whole pi swap thing. Did everything by the book and such. Put it back in the car and started cranking the engine. I didnt see any raise in oil pressure. After cranking 3 or 4 times for a couple seconds a squeak started. I thought it was the cam caps initially but its...

Hello all, as seen in the title I have a 2000 mustang GT 4.6 throwing misfire codes for cylinders 1 and 5. Was driving fine and went to start up one day to a rough idle and terrible acceleration. Took a look and did the old test of unplugging other cylinder wires to troubleshoot. Found 1 and 5...

Total newb here. I saved my lunch money went and blew it all on an 89 GT convertible in rough shape and started dumping my cash in the motor. After 2 years of working on her I got it on the street. I had Kim Barr Racing Engines out of Garland, TX build my motor. I did the rest. My main...

So I just finished my P.I. swap in my 97 and went with Bullet Stage 2 cams and went with an O/R mid pipe. When I cold start my car it holds an idle but once its warmed up and put in park the RPMs drop and the car stalls out. I had my car tuned before the swap so I'm wondering if I just need a...

Im looking to do 2 different builds and can't decide what one to do. First off all of the things that will stay the same: 1995 mustang gt, 347 stroker stock block for now, Afr 205 Heads, trick flow r series intake, t5 Tranny, 3.73 gears, bbk equal length shorty headers, bbl off road h pipe...

Alright so ive just recently purchased an 86 svo. Car is all stock, with the exception of a 3" downpipe. When i purchased the car it ran wonderful. Not a skip or hiccup. Now that shes home, she wont start. Ive checked spark, and its there. Fuel gets all the way to the rail and fouls the plugs (...

I can't find much info on flex plate installs online or in the Haynes manual other than mark the plate and crank so it goes back on the same as it came off. So, what if your replacing the flex plate or in my case the engine did not have one when I got it? From what I have read they are 0...

ive been thinking of running a zex wet kit on my notch to see what its capable of,i have a 10 lb zex bottle and thats it,i found a zex wet kit with everything except the bottle,ive never used n20 on anything before,i no basicly whats needed ie timing,plugs,etc... can some one explain about the...