Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 145 Results
  1. Exhaust Parts
    Sold the project and never used the headers. For SCJ heads. Save some $ Also have D&D engine mounts as well. Would be great to sell local
    $675 USD
  2. 5.0/5.8 Engine Tech
    Anyone using Hooker Super Comp headers for their Foxbody 302 5.0 HO? I understand that OTS headers aren't supposed to fit perfectly because everyone's combo is different, but all the reviews on Summit and Jegs just say the fitment is piss poor...can anyone confirm this with pictures or personal...
  3. Drag Racing
    My local classic car dealership (Streetside Classics) recently got a 1964 Ford Galaxie 500 Super Stock (FE 390) car in their inventory so like any sane individual, I dropped everything and hauled ass to go stare at it for a few hours. While I was looking at the engine, I noticed it had stock...
  4. 94/95 Tech
    I have a 1994 5.0L Mustang, and took a pair of GT40P heads off of an Explorer (can’t remember year). I know there’s several posts about correct-fitting exhaust headers, but I can’t seem to find any for sale. I’ve searched for MAC, FRPP, and Motorsport, but I couldn’t find any for sale. Will I...
  5. 5.0/5.8 Engine Tech
    Anyone have any experience with Hooker Super Comp headers on their 302? Reviews on Summit all suck, but a few people at my local drag strip run them on gutted engine bay setups and dont have any issues. Feeling mixed about it.
  6. Windsor Engine Parts
    The FRPP (Ford Motorsport) stainless steel GT40 “P” specific shorty headers are very desirable, rare, and super hard to find these days for those wanting to use the GT40P cylinder heads in their mustang. These headers are noted for their superior fitment and construction. I have a set that are...
  7. 5.0/5.8 Engine Tech
    I've got an 86 gt with a AJE k member and a 4r70w transmission. I am currently running BBK shorties and they work fine. But I've had the itch for long tubes recently. Last time I had long tubes(cheap flowtech) the car was stock k member, aod, cooked the stock starter, took hours of painstaking...
  8. Exhaust Parts
    Dynatech LS Swap headers for a foxbody, will fit perfectly with a UPR or AJE K-Member. I have welded on V-Bands to make for easy exhaust removal. I am also selling my X-Pipe that has V-Bands welded as well. Fit perfectly on my 1987 Foxbody, will fit any LS fox from 1979-1993. Dynatech 1 7/8...
  9. Exhaust Parts
    I have a set of CPR(Custom Performance Racing) 1 7/8" longtubes going into 3.5" collectors for Highports on a 351w based motor. The rest of the exhaust is 3.5" flowtubes into 3.5" Schoenfeld outlaw mufflers and 3.5" turndowns. Had this setup on a 421" sbf with Highports in a foxbody. Fit great...
  10. Exhaust Parts
    I have a set of 1 5/8" equal length shortie headers in good condition. I'll take $110 for them. PM me or call/text me @ 3013953921
  11. Power Adders For Sale
    Selling a pair of used B&G Turbo Headers. They ran perfect on the setup they were on. Aren't the prettiest looking but they do what they need to. PM for pictures. $200 + Shipping I am in the south Chicagoland area.
  12. 94/95 Tech
    Hey guys! I just picked up a 1995 Mustang GT as a project and I wanted to reach out to the community and start a thread discussing some of the issues I've come across. I'm only somewhat familiar with this motor, I had a 1991 F150 years ago that had the 5.0, but I will need a refresher on some...
  13. Windsor Engine Parts
    Hooker 2" 351w swap headers...part#6228 I have a set of Hooker 351w swap headers. Part# 6228. Their 2" going into a 3.5" collector. Headers already have crankcase evacuation fittings welded on them. Also doesn't have the small adapter plates! Comes with adapter plates that use the wide 3"...
  14. Windsor Engine Parts
    +NEW+ MAC 1 3/4 SHORTY 351W SWAP HEADER CERAMIC COATED I bought these new a few months ago and never ended up using them. They are still in plastic and in the original box with bolts. 300 + Shipping text 541-292-3800
  15. 5.0/5.8 Engine Tech
    Hey guys I'm kinda new here. Was wondering if anybody has used Hedman headers on a foxbody? Curious how the fitment is? The coating or finish/welds etc aren't really a concern just want them to fit well. I'm trying to save some money and made the mistake of buying some summit brand which don't...
  16. Windsor Engine Parts
    HOOKER 6228 351W SWAP HEADERS - LONGTUBE - 2" Primary with adaptor plates/ bolts and 3.5" collector. Serious headers for high rpm or biggere inch Windsors. They have the usual Hooker Surface rust... Drivers side header bottomed out some so one of the primarys is dimpled but nothing to...
  17. Exhaust Parts
    Looking for a 3in h or x pipe sn95 longtube setup need some good sounding 3 in mufflers thanks
1-19 of 145 Results
Top