Ford Mustang Forums banner

head

  1. SVT & DOHC
    Hi all. Finally got the driver's side head off my '96, to fix a failed helicoil repair for the ol' blown-out-plug defect. I need to ream out the hole and put a Time-Sert in there. Meanwhile, though, would anyone like to weigh in on the condition of this engine? Obviously the surfaces are caked...
  2. SVT & DOHC
    Hi all. I've got my valve cover off and now I need to remove the timing chain and head so I can fix a blown-out plug hole. I don't even know how to remove the timing chain yet, but once I do... can I just pull the head off? I realize that the cams have to stay in position relative to each...
  3. Power Adders For Sale
    re
  4. Windsor Engine Parts
    347 stroker and Windsor SR heads and more 347 stroker w/ stock block Scat forged crank directly from machine shop still in bag Forged Ross XL400 pistons Not sure who makes the rods Main studs w/ main girdle Main caps were grinded for more surface for the girdle to contact Cam bearings were...
  5. Windsor Engine Parts
    PRICE LOWERED>>>>>>>$525.00 + 15.00 Shipping<<<<<<<< [email protected] paypal One Single Trick Flow 170cc Head part # TFS-51410004-M61 New In box 61 cc Chamber Trick Flow® Twisted Wedge® 170 Cylinder Heads for Small Block Ford TFS-51410004-M61 - Free Shipping on Orders Over $99 at Summit...
  6. Windsor Engine Parts
    Set of used bare casting TFS 60194 5.0/302 cylinder heads from the late nineties. Used sparingly on a 5.0 set up before going to an aluminum set up. See attached info sheet regarding the specs for these heads. Studs and guides (pictured) have been removed and not included. These were the heads...
  7. Windsor Engine Parts
    SOLD Hello All, I am the original owner of these heads. They are Keith Craft AFR165 which means Keith Craft Racing bought the bare castings, did the CNC work, and installed their own upgraded hardware from the standard AFR stuff. The bare casting part number is #140. As-assembled by Keith...
  8. Windsor Engine Parts
    They are 205cc,66cc combustion chamber. Brand new PAC 1239 hydralic roller springs. Max lift .800, 2.02 intake,1.6 exhaust valves. 7/16 studs. Ported and polished by Shortties porting service(featured in hot rod mag). I have the flow sheet for these. Excellent mid lift numbers where most street...
  9. Windsor Engine Parts
    Looking for a used set of edelbrock performer rpm heads. Can be assembled or not. Lightly used and in usable bolt on condition. Heres the kicker, needs to be 1.90 intake not 2.02. Let me know what you got!
  10. Exterior Parts
    2011 Mustang GT Head, Tail, Fog Lights and valance. Light and front valance from a 2011 Mustang GT, they will fit 10-12 v6, or GT. These are all OEM parts. Headlights Assembly Pair - 150$ Taillights Assembly Pair - 150$ Front lower Valance - 50$ Fog lights Assembly Pair - 30$ All prices are...
  11. 5.0/5.8 Engine Tech
    It's been years since I had the time or money to do anything with the mistress. I am looking to return life to my sleeping '93 gt. I currently have a setup I'm unhappy with due to plans that never unfolded. I'm sitting on edelbrock performer heads I hate, a custom lunati cam from a carbureted...
  12. 5.0/5.8 Engine Tech
    so im building a new combo in a little bit here and i am trying to squeeze the most power of what im going to be working with. i was thinking of a trickflow stage 2 cam or some other sort of cam i wanna step away form the E cam since its basically a paper weight. i know of the ed curtis cams an...
  13. 5.0/5.8 Engine Tech
    okay so i was thinking of getting a new Ed Curtis cam but dont know if i should wait. i want to do a 306 eventually but wont happen till next year probably. current set up is... -TFS track heat intake -70mm TB -cold air intake -TFS 170cc heads W/ 1.6 roller rockers also have the upgraded...
  14. Modular Engine Parts
    anyone has a passenger coolant outlet, pm me if u have an extra one lying around? looking to do the cooling mod.
  15. 351C/BBF Parts
    ARP 154-3604 Cylinder Head Bolts, High Performance, Hex Head, Ford, 351C, 351M, 400, Kit Used once... I really don't think there is even a scratch on them; will need to relook. Can send pics upon request. $65 will get them to you... Fees and Shipping included!! Thank you. 214.206.6384
  16. 5.0/5.8 Engine Tech
    Would anybody happen to have, or know where i can find a blueprint for the GT40p heads? I'm milling down the rocker arm bosses to drill out for 7/16 stud mount rocker arms, just curious to know the exact specs. Thanks
  17. Modular Engine Parts
    comes with cams, springs,lifters, and rockers.They are complete 125k I will get back to this with pictures and more details soon. I'm a little busy with Christmas I also have the tensioners guides and covers I have not sold on here yet, but you can find me on EBAY cgostola. with excellent...
  18. Windsor Engine Parts
    Im looking for a SINGLE head, I have looked on summit and such, and no luck. I dont really care if its assembled or bare. Send pics and a price! Thanks!!
  19. Exterior Parts
    No longer for sale
  20. Windsor Engine Parts
    Ordered two sets from Summit for another project but sold the motor to a friend so I have a new in wrapper set of Cometic multi layer steel head gaskets ready to go. These are the Trick flow/Cometic joint HG's for production heads and block. Made for Trick Flow by Cometic, theyre identical save...
Top