Ford Mustang Forums banner

gt40p

  1. 5.0/5.8 Engine Tech
    This is not another thread asking for flow characteristics or valve measurements. I'm trying to figure out if things like gaskets, valve covers, and other accessories are compatible with one another. I've got GT40 heads on my 5.0 right now, and when I went in for spark plugs I told the guys at...
  2. Windsor Engine Parts
    GT40p heads: Stock valve sizes New Ferrea valves (6,000 series) Spring cups for high tension spings New valve guides Fully ported Milled Needs springs and are race ready Explorer upper and lower intakes: Milled Can include spacer if you need it Asking $750 for the heads OBO Asking $150 for...
  3. Windsor Engine Parts
    For Sale: Heads, Intakes, Rockers, Push Rods I have a set of GT40p heads, Explorer upper and lower intakes, Comp Cams gold rocker arms, Trick Flow pushrods. Heads --Ported --Polished --Milled --3 angle valve job --New springs --New retainers --New guides --Not warped --$800 OBO Came off my...
  4. 5.0/5.8 Engine Tech
    Hi, Im new to the forums here, but I've read around a good bit. Anyways, I'm looking for suggestions and a horsepower estimate with these upgrades: Cobra intake and 1/2" spacer GT40p heads BBK CAI 24lb. injectors 70mm throttle body 73mm MAF. BBK unequal length shorties (I will make them fit the...
  5. Exhaust Parts
    I am looking for a set of the Ford Racing GT40P fit shorty headers part #M9430P50. If I can get a clean set at a good price I will be able to go with a P combo. Help a hotrodder out!
  6. Windsor Engine Parts
    I have a set of GT40p heads, Explorer upper and lower intakes, Comp Cams gold rocker arms, Trick Flow pushrods. Heads --Ported --Polished --Milled --3 angle valve job --New springs --New retainers --New guides --Not warped Came off my running 1988 Mustang. Upgraded to aluminum heads All work...
  7. 5.0/5.8 Engine Tech
    Hello, im starting a 306 build and i bought an explorer intake about a week ago on corral, then locally there was a guy selling a tubular with all the injectors and 75mm throttle body way too cheap for me to pass up! From what i understand the gt40 tubular, gt 40 explorer, and the cobra intakes...
  8. Windsor Engine Parts
    I have two sets of gt40 intakes off explorers. They have been cleaned and gaskets scraped off. The plaque has been polished and painted. Ready to bolt on. will sell for 120 plus shipping each obo. Also have a set of gt40p heads off an explorer from a junkyard. They have 120k miles on them...
  9. Windsor Engine Parts
    I'm selling an Upper & Lower Explorer Intake manifold from a wrecked 96 Explorer I pulled the Gt40 heads from. $120 + shipping. Payment via Paypal only. Email for pics. Thanks! [email protected]
  10. Windsor Engine Parts
    so i need to buy some gt40 or gt40 p heads They must have the smog pump holes on the back no broker bolts no cracks no rust and they dont need to have the rocker arms because im looking for 1.7 or 1.72 if they have those even better i live in novato California which is 20 miles north of...
  11. 5.0/5.8 Engine Tech
    hello everyone, i am going to run tri-state gt40p's with stud mount rockers and a tfs1 cam and i was wonder if i can go with 1.7 rr or will this cause valve clearence issues? also which pushrods and lifters should i go with? this will be a turbo car in the future and i woud like to make sure...
  12. Windsor Engine Parts
    I have a set of Mac perfromance 1 5/8 caramic shorties for GT40P heads. These headers are brand new in the box still can send pics apon request. Must sell lowballers welcome. I have no need for them. They also come with brand new header bolts. over $300 new I will would like to get $150 for them...
  13. Windsor Engine Parts
    Selling my GT40P complete top end that I was going to put on my 95 but sold the car and have everything left over. Here is what I have I will be posting pics later. GT40P heads complete ready to bolt up $200 GT40P Mac headers ceramic coated brand new still in the box $170 Explorer GT40 intake...
  14. Windsor Engine Parts
    SOLD!
Top