Ford Mustang Forums banner
gt40
1-20 of 109 Results
Advanced
  1. 5.0/5.8 Engine Tech
    I recently purchased an 89 vert 2.3 automatic for pennies. I also bought a pair of GT40 heads and a 5.0 block from a 97 explorer. What cam is best for this setup. Upper and lower GT40, GT40 rebuild heads with bigger valves with dual springs. Standard bore and standard crankshaft. All I am...
  2. Windsor Engine Parts
    SOLD Selling a lower for a 5.8l 351w that’s was pulled from a marine engine. Cast iron so it’s heavier than aluminum, solid and can handle anything you throw at it. Thanks for taking a look...
  3. Windsor Engine Parts
    Selling the heads and intake off of an explorer. The heads are gt40, non P heads so they’ll fit all standard sbf headers. They make a great upgrade over factory e6 or e7 heads. $400 for everything, located in savannah, ga. Would strongly prefer to sell everything together. not really looking...
  4. Drag Racing
    I have been low 12s for the last 2 years. The best was 12.17 (had a couple of them). I was running MT 26x10 stiffwalls on 8” wheels. I put on Hoosier 26x8.5 and the very first pass was 11.99. To be fair it was Saturday morning and the air was around 500’. It has more left in it. I put on some...
  5. 94/95 Tech
    Hey everyone. I've finally gotten around to doing an Explorer intake swap on my 95 GT and have a few questions. I know I need to get an elbow adapter(I plan on picking one up off an Explorer from the junkyard along with throttle body) but I need to know the size of the studs that connect the...
  6. Miscellaneous Mustang Parts
    Looking for GT40 intake cover plate with screw hole alignment for lightning upper intake. Call 681-235-2167 or [email protected]
  7. Windsor Engine Parts
    withdrawn
  8. Windsor Engine Parts
    Cobra GT40 intake For sale I have a Cobra Gt40 intake. Comes with a new intake decal (not pictured). 550 shipped.
  9. Windsor Engine Parts
    $300 This is a new (NOS) Cover, never installed, ready for install or a Polish. PayPal only. Carefully packed, insured, shipping is included to anywhere in the CONUS.
  10. 5.0/5.8 Engine Tech
    hey forum, recently i had a tubular gt40 intake, gt40x heads, and ford performance headers installed onto my 1993 5.0, and as soon as i got the car back it was having an issue, whenever i went WOT the car just lost power and will backfire near 2500 rpm. I've already checked that the spark...
  11. Windsor Engine Parts
    We are building a mild 302 for a weekend cruiser. We have a pair of GT40P heads, but by the time we have the springs upgraded, valve job and the special headers needed to run them we will have some cash in them. We would like to find a pair of ole 302X heads, a ready to run pair of GT40's or...
  12. 94/95 Tech
    Hey so this is my first post and I have a question about the intake elbow for a gt40 explorer intake. I'm buying a gt40 explorer intake tomorrow and the person I am getting it from has a "65mm throttle body converted for mustang" I am guessing this is the intake elbow but I have a 95GT and it...
  13. Windsor Engine Parts
    GT40 tubular upper and Explorer lower intake $315 shipped GT40 tubular upper and Explorer lower intake. There is a dent in one of the runners (#1). Both have been thoroughly cleaned and are ready for paint or powder coat. Will include the bolts and a brand new gasket (between upper and lower)...
  14. Windsor Engine Parts
    Ford Racing Valve Springs (M-6513-A50) New in box, never installed. $95 shipped to the lower 48. PM me for fastest response.
  15. Windsor Engine Parts
    Located in Danbury, CT. My email is [email protected] and I have a verified PayPal account with the same address. The short block is for local sale only!! 1985 xxx block with DSS main support girdle forged trw in-line fly cut pistons. timing cover to centerforce dual friction clutch. oil pan...
  16. Power Adders For Sale
    I have some parts for sale that came off my car.. All parts were in working order and off of a 89 5.0 mustang vortech v1 sc trim supercharger head unit $1200 or with brackets some bolts $1500 edelbrock performer intake (black) $350 Explorer gt40 intake ( black ) with 65mm tb $150 39lb injectors...
  17. Mustangs For Sale/Wanted, 1987-1993
    $5500 OBO No Trades..... 302 with GT40 cast iron heads Ford racing E303 cam Holley systemax intake 75mm TB Fender cold air intake 4" fiber glass cal hood BBK solid bushing lower control arms BBK adjustable upper control arms BBK power-plus fuel regulator Aluminum drive shaft UPR chromoly K...
  18. Windsor Engine Parts
    Like the title says, Im looking for a set of gt40p heads in Ontario. Could meet somewhere in the south but live in North Bay. Thanks
  19. Windsor Engine Parts
    Have a set of GT40P heads that were pulled with stock valve-train. Bought them a few years back to had redone but looking to buy a set of heads that are ready to go. Just want to get them out of the way so $150 takes them. Will update with pictures later today. PM me and ill give #.
  20. Windsor Engine Parts
    got some 351 stuff to unload, aluminum ford racing x303 heads and a 94 roller block. Hi every one. I know im new here but im not new the the forum experience. I am a lightning guy but I do have some parts that will interchange. If you want you can check me out over at Lightningrodder under the...
1-20 of 109 Results
Top