Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 163 Results
  1. Classic Mustangs & Fords
    Hey y'all, Cars just about ready to fire for the first time; Injectors and wiring are in. Hooked up a battery and test for power. Car has lights, horn, guages, etc. But I notice a distinct lack of fuel pump priming. 1993 foxes had the relay on the strut tower, the 87 car my harness came from...
  2. Powerplant
    I have a 2003 Mustang base 3.8l v6 with 89,000 miles. I have to turn the key on and off multiple times for it to start right up. It runs fine for like 30 minutes, then if I shut it off it will be hard starting then it will want to die later in the drive like misfires. When I get home, it stalls...
  3. 94/95 Tech
    I’ve been having issues with my 1995 GT mustang. Sometimes when I am braked or slowing to a stop the engine will die. If I try to start it again no noise will be made at all (sometimes the engine DOES turn over but doesn’t start. The battery light pops up). The engine won’t turn and the “dead...
  4. S197 Mustang (2005-2010)
    im having and issue with high fuel pressure on my 05 v6 mustang some times it is at 50 psi most times 62-67 psi, check frps with a mechanical gauge wich the gauge was 8 psi under ive read that is normal, in key on engine off the pressures were exactly the same . went to do a continuity test for...
  5. Electrical & Wiring
    im having and issue with high fuel pressure on my 05 v6 mustang some times it is at 50 psi most times 62-67 psi, check frps with a mechanical gauge wich the gauge was 8 psi under ive read that is normal, in key on engine off the pressures were exactly the same . went to do a continuity test for...
  6. For Sale Vortech fmu

    Fuel System & Related
    Selling a vortech fuel management unit. Comes with lines, ready to go. Didn’t need this as the car I did had larger injectors and an aftermarket ecu. $120 + shipping.
    $120 USD
  7. For Sale 94/95 fuel rails

    Fuel System & Related
    Selling a set of 94 95 sn95 fuel rails in good shape. I’ll post a picture tomorrow. $75
    $75 USD
  8. General Mustang Tech
    Haven't built a fox in something like 20+ years, but I'm mid process of building a "street legal" 90 LX drag car. Plans are around 800hp for this turbo build. Anyhow, my original plan was to run a sumped OEM tank and external pump. Welding the sump on isn't an issue, but I can't find any good...
  9. General Mustang Tech
    What fuel level sending unit should be used? It’s aeromotive tank but it doesn’t say what unit to use? 03-04 cobra or 87-93?
  10. Fuel System & Related
    Selling one of my spare a1000 pumps. I have 3 so I may as well get rid of one. Pump only, no fittings or filters $250 shipped SOLD
  11. 5.0/5.8 Engine Tech
    Hello, Start of by saying this is my first carb and first mechanical fuel pump car. 1986 5.0 hatch 302 - Holley 600. The car was running fine and then left sitting in the garage. I went out to start it one day a few weeks ago and the inline fuel filter bowl in between the pump and the carb was...
  12. Fuel System & Related
    Have a set of trick flow tfx 44lb high impedance fuel injectors. Had these on a 347, only removed to step up to a bigger injector. All are In great working order and have less than 5000 miles on them. Idle like stock if you tune for them. $250 for injectors Also selling a pro-m 80 MAF. Bought...
  13. Fuel System & Related
    For sale I have a Aeromotive A1000 FI Bypass Regulator (13101), low miles. 125 shipped.
  14. Fuel System & Related
    Listed is one New Ford Motorcraft Fuel Filter, Part number: FG-986B Asking $10/obo. Buyer picks up or pays for shipping from the 22152 zipcode (Springfield, Virginia). Fits most SN95 Mustangs and many Ford/Lincoln/Mercury Vans and trucks. You can check your application on the motorcraft.com...
  15. Fuel System & Related
    I have amassed a bunch of carbs that i no longer need because i am stepping up to a much bigger motor. 1. Holley 4776 600CFM Double Pumper with Manual Choke. Was totally rebuilt, no miles since. 150.00 obo 2. Edelbrock Performer #1407 750cfm. Needs to be cleaned but was working when pulled...
  16. Suspension
    Parting Out Turbo Project (lightweight brakes, drag suspension, more...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner...
  17. Electronics and Entertainment
    Parting Out Turbo Project (Autometer gauges, more) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner, Greddy, Spearco, MMR...
  18. Exhaust Parts
    I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner, Greddy, Spearco, MMR, etc. ... good stuff! Click on my username and you...
  19. Fuel System & Related
    Parting Out Turbo Project (Magnafuel 750 pump + reg + filter, 160 lb. injectors, more ...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands...
  20. Power Adders For Sale
    Parting Out Turbo Project (Borg Warner, Spearco A2W, more!) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel pump/filter, vacuum pump, 4” exhaust, etc. ... good stuff! Click on my username to see my other postings. I will...
1-20 of 163 Results
Top