Ford Mustang Forums banner
1-17 of 250 Results
  1. Electronics
    Hello so this fox I bought, seems like they tried stealing it from the previous owner, I’m trying to repair this ignition switch connector male part and the wires were cut, I obviously know to just match the colors together but some of the wires are the same color, are this interchangeable??? I...
  2. Lightning/Harley Davidson F-150
    Hey guys, Im a new member and relatively new to the car scene. I am wanting to have the team Z through floor sub frames installed, and the team Z mini tubs installed on my 88 LX. I had a guy here in Louisville, KY quote me about $300 for the sfc, and $4000 for the mini tubs and coil over bar...
  3. Northwest
    Anyone selling sn95 rear end and front spindles? Planning to do a 5 lug swap for my 93
  4. Interior Parts
    Looking to get a set of OEM black A/C Heater vents and registers for my interior swap. Please send pics to [email protected] or post here along with pricing.
  5. General Mustang Tech
    So I just picked up a 1993 LX last night, it has a T56 with a spec clutch that is not fully engaging. I didn't really "get on it" in the test drive as it was a low mile super clean car. Pedal is all the way out and the fork looks like it has no more room to move. Clutch doesn't fully engage and...
  6. General Mustang Tech
    Hello, Doing the coyote/MT82 swap in fox. I haven’t installed yet, but was told the shifter is about 3 inches behind where it needs to be. I was also told there’s a shifter to buy that will correct this problem, does anyone have a link to this shifter? Thanks in advance!
  7. Suspension
    Out of a 88 5.0.... 373, Strange 31 spine axels, spool, c clip eliminators,billet differential cover w/girdle, long studs, newer brakes.... upper and lower tubular a arms, kyb shocks, ford motor sport springs (not pictured).. located in griffith indiana (complete take out Ready to bolt in)
  8. Miscellaneous Mustang Parts
    Flex-a-lite Black Magic Xtreme 15'' electric fan for Foxbody - I just upgraded my supercharger crank pulley, so I went with a different cooling fan set up. This fan is in perfect working order. Had been using this fan for the past few years, no issues on my daily, Florida car with A/C. Zero...
  9. Drivetrain Parts
    I have a nice lightly used aluminum driveshaft out of a fox body with a TKO600/8.8 diff for sale. $150 OBO.
  10. Member Build-Up Projects
    I thought I would share some pics of my 4.6 DOHC Swap that I completed last year. I started this project 9 years and 3 kids ago. Its basically an aluminum block 03 cobra motor with a GT500 M122 bolted to a Viper T56. I used 94 Cobra brakes including the ABS and I am running the MS3 Pro for the...
  11. General Mustang Tech
    so i recently swapped the aod in my 91 mustang for a c4. its a stock c4 but has a shift kit. the problem im having is the car doesn't seem to shift very hard under heavy throttle like it should with the shift kit and also it wont shift into 3rd gear until about 45mph. i have the vacuum modulator...
  12. Other Fords and Trades
    FORT WAYNE< IN Looking for a 87-93 Fox body - prefer t-top Nismo 19" wheels - Less than 1k miles on wheels / tires Nismo style exhaust CARBON FIBER ADD ON REAR DIFFUSER Black Leather Power interior Custom LED Headlights / Black inside Brembo Breaks H&R Lowering springs SPC camber kit Stillen...
  13. Miscellaneous Mustang Parts
    FS | Auto Meter Ford Motorsport Oil Temp Gauge | NOS Auto Meter Pro Comp FORD MOTORSPORT 2 5/8" Oil Temperature Gauge Ultra Rare and Brand New. $80 Shipping is $10 Conus
  14. Drivetrain Parts
    '79 to '95 Fox Mustang Aluminum Driveshaft Selling the aluminum driveshaft shown in the pictures. Measures 45.5" center to center in length and has a t5 yoke. Also have it listed on ebay for $180 but will knock some off for Corral users, make an offer. '79 to '95 Fox Mustang Aluminum...
  15. Exhaust Parts
    Up for sale is an off-road H-pipe that came with my 1993 Cobra. Not sure of the brand but the tubes measure 2.5 inches in diameter and it was on a manual trans car. Asking $100.......local pickup in Northern NJ.
  16. General Mustang Tech
    Hello Guys from I'm a big Mustang Fan since i was a little child. Now I am 20 years old and i'm driving (and repairing if there is something broken) my dad's 1970 grabber orange manual geared 351 Cleveland Mach 1 for two years. In Switzerland you can make your driver's license with...
  17. Mixed-platform Engine & Drag Racing Tech
    Hi! I've been lurking, reading, & planning this project for several months & am excited to say that I am now the proud owner of an 89 LX Foxbody notch! I picked her up from a buddy for $300, and surprisingly its in relatively good shape. Complete interior, no major rust issues, straight body...
1-17 of 250 Results