Ford Mustang Forums banner

flywheel

  1. Drivetrain Parts
    Hey guys, I'm selling this stuff as a package deal, all brand new never used: - Exedy Stage 4 Clutch Kit - Exedy Lightweight Racing Flywheel - Maximum Motorsports Clutch Cable I purchased these parts brand new from American Muscle back in February. I've been meaning to install them in my GT...
  2. Modular Engine Parts
    Aluminum flywheel for Ford 4.6L 4v Cobra engines. Will fit 4.6L 3V and 5.0L TiVCT with non-production clutch - Was briefly installed but in like-new condition. Reduced Price: $150 shipped (local sale available in Ann Arbor / Detroit area) PM or email [email protected] Thanks. Specs...
  3. 5.0/5.8 Engine Tech
    I have a 5.0 with the mods listed below, all basic over-the-counter upgrade parts. It runs strong and is a lot of fun, but like everyone else, I'm looking for more power/torque. I've seen guys post about upgrading their flywheel and harmonic balancer to a 28oz version. Everything seems to be...
  4. Drivetrain Parts
    Brand New Ford 3.55 gears..comes with ring and pinion, crush sleeve, shims and new nut - $120 shipped .....SOLD Brand New Ford Racing 31 spline carrier - I should also have new c-clips I'll throw in $200 Shipped.....SOLD Rear diff bushing TOOL New Never used $30......SOLD Used but good...
  5. 5.0/5.8 Engine Tech
    I am doing research for my build. I have 68 fastback with a 351W, around 363 after machining. It produces around 400 HP with a redline of 7000 RPM. My transmission is a TKO-I (260 0708) which is listed for up to 425 lb-ft of torque but has the upgraded 26 spine input. I'm getting opinions on...
  6. Drivetrain Parts
    Spec Billet SOLD! 96-04 V8 Clutch Fork, missing the little bolt on counter weight, $23 SHIPPED
  7. Drivetrain Parts
    Spec Billet Aluminum SOLD! Tremec Aluminum Bellhousing SOLD! 96-98 V8 Manual Pedal Assembly SOLD! 96-04 V8 Clutch Fork, missing the little bolt on counter weight, $23 SHIPPED
  8. Drivetrain Parts
    I'm selling a Spec Stage 1 clutch and aluminum flywheel for the late 01-04 Mustang GT, 03-04 Mach 1, and 99-04 Cobra which in other terms means the kit is compatible with T-45, TR3650, and T-56 transmissions. I bought it with the intent of using it as a replacement for my stock clutch, but...
  9. Drivetrain Parts
    RAM SBF billet steel internal balanced 157t flywheel I have a Ram sbf billet steel flywheel for sale. It was originally an 50 oz. flywheel but I had my engine balance shop convert it to an internal balance flywheel. It has also been resurfaced and has not been used since any of the work was...
  10. Windsor Engine Parts
    I have a ram billet steel 28oz flywheel for sale, $150 located in South Carolina but will ship
  11. 5.0/5.8 Engine Tech
    I need help identifying a Spec flywheel counterbalance size. Is it 50oz or 28oz. The paperwork on the flywheel was lost and need a little help. Yes I did a search, all the pics in the search threads are no longer available. Thanks!
  12. Drivetrain Parts
    HELP!! Need a Fidanza aluminum flywheel counterweight for my son's 5.8 GT. In the middle of a Tremec install and found out that the Fidanza late model flywheel I gave my son has a counterweight for a 50 oz setup. His is a 28 oz and I don't have the other weight. Need it asap!!
  13. Drivetrain Parts
    SOLD! Spec Billet Steel Flywheel 50 oz / Zero imbalance brand new 1986-95 Mustang 5.0 Spec Billet Steel Flywheel, 50 oz / Zero imbalance brand new in original box. Got this with a new short block package I purchased but have a Lentech racing transmission. New SPEC billet steel Flywheel Part#...
  14. Drivetrain Parts
    BRAND NEW Spec Stage 1 Clutch and Aluminum Flywheel I'm selling a Spec Stage 1 clutch and aluminum flywheel for the late 01-04 Mustang GT, Mach 1, and 99-04 Cobra. I'm selling it because I'm going with a heavier duty clutch to go along with my engine build. It's brand new in the box, and...
  15. Windsor Engine Parts
    I have for sale off of my 1993 Cobra: Pro M Mass air meter calibrated for 30lb 100.00 shipped 30lb ford injectors 100.00 shipped Steel flywheel needs to be balanced (never used) not sure on brand 70.00 shipped 24 lb ford injectors original 1993 injectors sold Factory 1993 cobra world class t5...
  16. SVT & DOHC
    Ok guys, I've been searching and searching and I've made some headway but need some input. Situation. I bought a 98 cobra with a disassembled motor, the previous owner was in the middle of an overhaul and lost interest. It has many bolt ons and also has a near new clutch. I also found a good...
  17. S197 Mustang GT (2011-2014)
    Has anyone reused the stock flywheel on a clutch upgrade? I have a clutch coming but am getting mixed feedback on the stock flywheel. Can it be resurfaced or should I just get the new flywheel? Resurfacing has not been an issue on other cars I have had but this tranny is suspect at best in...
Top