Ford Mustang Forums banner
fast
1-20 of 39 Results
  1. Mustangs For Sale/Wanted 2005-Present
    This is a series build with nothing but the best parts. MPR built with Billet rods and Sleeved Coyote engine with MFP crank support. KBlc Supercharger. 400 trans fully built, Reid case, 2 speed option, 210 first, PTC Converter. Built 33 spline 8.8 and braced. Trunk mount custom built fuel cell...
  2. Electronics and Entertainment
    FAST Classic Sequential ECU EFI kit. I had no issues with it. Complete with main harness and all sensors (NTK wideband, air, coolant, 3 bar MAP, new TPS). Harness connectors are labeled for a hassle free install. Everything (except 12v, ground wiring, and points wire) plugs right up with the...
  3. Mustangs For Sale/Wanted, 1999-2004
    This car is a 100% street car... Built with overkill in mind. VIDEO OF CAR: https://www.youtube.com/watch?v=-Xtr-BiQK0E Power window Power locks Keyless entry/trunk etc Heat works AC needs charged (and high psi switch) Massive fuel system for E85 ProEFI ECU Built reared Built TH400 Full...
  4. Mustangs For Sale/Wanted, 1994-1998
    Nicely modified 1997 Mustang GT 4.6L automatic/leather/Mach 460 stereo. Car looks stock other than being lowered. Very quick car with unique sound due to mods. White with gray leather seats and two-tone black/gray interior. Power windows, trunk latch and door locks. Excellent condition, adult...
  5. Electronics and Entertainment
    For sale, Brand new, never used, Stinger P.I.M.P. Stand Alone Engine management System. Uses VE Analyze live for "Auto Tune" Please PM me with any questions. Comes just like it did from Stinger. Thumb drive, sticker, stand alone computer, jumpers, Tuner studio and pc cable. I just paid $730...
  6. V6 Parts
    Have 6 50lb/hr FAST injectors out of a 2011 mustang v6. Looking to get 300 OBO shipped for the whole set. Cost 412.00 New. In great condition all o rings in good shape.
  7. Mustangs For Sale/Wanted 1978 and older
    https://www.facebook.com/1965FORDMUSTANGFORSALE?ref=hl
  8. Power Adders For Sale
    I bought this kit last summer with 400 miles on the kit, I used it for about 600 miles, installed an 8 rib kit. This kit with the crank pulley included will produce about 11 or 12psi. Kit comes with the Following - Vortech v3 sci headunit and mounting plate for 302 w/bov - C&L 90MM MAF -...
  9. Windsor Engine Parts
    Decided to go a different direction. Im in the process of putting the top end of this motor together but thought I would list it for sale beforehand. I purchased everything new and it had less than 500 miles on it now. It has a complete trick flow top end kit- tf heads, cam, track heat intake...
  10. Windsor Engine Parts
    Used for 1 month. Not enough for my big block. Can hear run . Summit racing #fst-30227-kit. 1200 shipped
  11. Mustangs For Sale/Wanted, 1987-1993
    SOLD! SOLD!
  12. Drag Racing
    THIS IS MY OLD COBRA IN ORLANDO MODS ARE POSTED IN VIDEO
  13. Windsor Engine Parts
    Selling a set of 302 performer heads with 1.6 crane cam rockers, comes with the 1.6 push rods and head bolts, would like $1000 shipped, feel free to give me a text only, 6039785883.
  14. Power Adders For Sale
    FS/FT 87-93 Mustang (A9L) ACCEL DFI GEN VI (6) and (8) 72#inj Turbo Technology Inc Accel DFI Gen VI (6) stand alone speed density with the Spark knock add on... (I paid $600 for just this) With calmap version (6.32) software Dan White Racing harness to plug straight in to a 87-93 Mustang...
  15. Mustangs For Sale/Wanted, 1999-2004
    2000 Mustang GT Convertible, Vortech Supercharged with after cooler. There is a lot of money invested into the car. It does have a salvaged title but that is from previous owner and you can not tell. Car runs,drives, and performs great. car gets looks and attention everywhere it goes! $MAKE...
  16. Other Fords and Trades
    looking for a 1995-2001 Cobra, 1998-2002 Camaro SS, 2005-2008 Cobalt SS, 1990-1996? 240sx with some type of swap For stats, my vehicle has this 110k on body 1.5k on transmission rebuilt with diesel drum, "red racing" kevlar clutches and some other fun nick-nacks 1.5k on 2800rpm stall...
  17. 5.0/5.8 Engine Tech
    anybody know a good 400hp setup thats fuel injected. gonna be working a lot this summer so im thinking about putting in a 347. wondering if i should bore the stock shortblock or go with a completed 347 shortblock? also i want to get 400hp on motor with the 347 so what other things am i going to...
  18. Mustangs For Sale/Wanted, 1987-1993
    Up for sale is a 93 Ford Mustang GT for $3300 O.B.O. (I may trade) THE MODIFICATIONS: E303 Cam, Eaton Limited Slip Differential, MSD Ignigtion system, Headers, Subframe Connectors, Electric Fans, Ford Racing Radiator, HID Headlight Conversion, Cold Air Intake, 3:55 Gears, Caster/Chamber Plates...
  19. Mustangs For Sale/Wanted, 1999-2004
    I have a fully built 2002 Mustang GT w/ clean title on hand. All the work was done by TexasHotrods in El Paso and Gearheads in Arlington. The car is stupid fast and ready for the strip/street. It ran 11.20's in the 1/4 on motor and 10.80's on 150 shot. Yeah on a 2 valve!! The car made 300rwhp /...
  20. Engine Management Systems
    We have added Holley Performance Products to our current line of parts. In lieu of this, we are looking for a few cars to install one of Holley's new HP or Dominator Engine Management Systems. We are looking for one or two LS powered vehicles, and two Ford powered vehicles (one modular, one...
1-20 of 39 Results
Top