Ford Mustang Forums banner
fan
1-20 of 30 Results
  1. Miscellaneous Mustang Parts
    Flex-a-lite Black Magic Xtreme 15'' electric fan for Foxbody - I just upgraded my supercharger crank pulley, so I went with a different cooling fan set up. This fan is in perfect working order. Had been using this fan for the past few years, no issues on my daily, Florida car with A/C. Zero...
  2. General Mustang Tech
    Hi all! Guys I'm looking for the radiator fan blades for my 1994 5.0 Mustang, only blades without a shroud and motor. Please help tell me where I cant find one. As I guess they are same for 3.8 and 5.0 engines. P.S. Sorry, maybe I poster in wrong section, I'm new here. Thanks!!
  3. Windsor Engine Parts
    I have a factory fan that will fit 94/95 5.0L and 96 4.6L 2v,4v motors. fan works fine, cleaning out garage and need it gone. $40 OBO
  4. Modular Engine Parts
    stock factory cooling fan for a 97-04 Mustang. No problems with fan, I bought is for a project and never used it. $50 OBO
  5. Electronics and Entertainment
    I bought a FK75 fan controller brand new a couple months ago. My '06 Jeep SRT-8 was running hot. I'd replace nearly every part of the cooling system, including several thermostats. I remembered my Fox Mustang days (I miss them), and how great my DC Controller was, so decided to give it a shot...
  6. Miscellaneous Mustang Parts
    Derale 13900 oil cooler kit with fan, complete in box - never installed. $168.97 at Summit, selling for $100.
  7. 5.0/5.8 Engine Tech
    I'm curious if anyone has run into an issue with the upper and lower hoses fitting the radiator. I measured stock radiator hose connections at 1-1/4 in, 1-1/2 out. And Flex-a-Lite advertises 1-1/4 in, and 1-3/4 out. I called to confirm and that is what they told me. How did you get the lower...
  8. Windsor Engine Parts
    I have a low mileage 3 row all brass Modine radiator and Derale high output cooling fan for fox body with aluminum mounting brackets / hardware. Both radiator and fan are in excellent clean condition. $160 shipped OBO
  9. GT & SOHC
    Hey everyone. I been working on this for months with no resolve. 98 Mustang GT Last winter I had the radiator replaced at a shop. Old one had a hole in it. This spring turned on the AC and only blows hot air. Put in refrigerant only to notice the ac compressor never kicked on. Changed the...
  10. Windsor Engine Parts
    Here is a link for the specs http://www.summitracing.com/parts/flx-180 Comes with all the wiring neccesary for installation. I installed a supercharger and have no clearance with pulley. It is awesome keeping temps down. I swear i ran 1/4 and temp never went over 195. They are pretty good. Cost...
  11. General Mustang Tech
    Hey guys I'm new and did a search but couldn't find out what I need. Basically I have a 93 lx notch in az, right now it has (cooling related) a 180* thermostat 3 row alum radiator stock fan and clutch no air dam... I changed from the 160* because the car would run cool for awhile (160-170) and...
  12. GT & SOHC
    Hi, i'm new here and i really need your help. my cooling fan won't turn on at all. I thought it might be the ccrm, replaced that still the same. The i replaced the cooling temperature sensor, still the same. Checked the fuses they are ok. So what should i do next? Thanks...
  13. Miscellaneous Mustang Parts
    Mechanical Fan w/Clutch and Shroud - $75
  14. Electronics and Entertainment
    Like title says.... looking for a contour dual fan setup... also looking for a DCC controller and an overflow catch can. Let me know, Thanks Corral!
  15. General Mustang Tech
    Just finished up the fan upgrade and im really impressed how well it worked. Picked up the dual fan unit (two fans and shroud) from a local u-pull it junkyard (fan was laying on the ground lucky me!). came with the wiring intact, reused the plugs for fans. COST ME $35$. i used a hayden wiring...
  16. Miscellaneous Mustang Parts
    OEM Ford Fan and Clutch (No cracks) $60 Shipping included
  17. Electronics and Entertainment
    http://picasaweb.google.com/lh/photo/anFcvoqeH9LX7TeDqVK6xA?feat=directlink RARE. You don't see these too often. This thing worked flawlessly when I used it. It looks brand new right down to the ends of the wires - it's practically new old stock - seriously. It was kept under the seat so it was...
  18. 5.0/5.8 Engine Tech
    My mounts on my 86 GT vert were bad, so I replaced them this weekend along with the trans mount. I had the typical fan rubbing occurring, and my fan blade was cracked at almost every vane. After putting in my new mounts, I still had some slight rubbing of the fan and wound up shimming the...
  19. Miscellaneous Mustang Parts
    :salute:I have a stock fan and clutch assembly from a '92 5.0. Came out of a running car, no issues...fan is in good shape no cracks. $40 + actual shipping cost. Thanks!
1-20 of 30 Results
Top