Ford Mustang Forums banner
explorer

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 39 Results
  1. Windsor Engine Parts
    Selling the heads and intake off of an explorer. The heads are gt40, non P heads so they’ll fit all standard sbf headers. They make a great upgrade over factory e6 or e7 heads. $400 for everything, located in savannah, ga. Would strongly prefer to sell everything together. not really looking...
  2. Automotive Tools
    For sale a practically new Ford 4.0 sohc V-6 cam tool kit made by OTC part number 6488 only used once. $199 shipped Works on mostly all sohc v6 from 1997-2010.
  3. 5.0/5.8 Engine Tech
    So im a little confused as to what design lll injectors will work in my mustang. I recently bought a set of injectors from a 96 ford explorer with part numbers f6ve-a5a except for one which was f4se-a1b. From my reading and research these injectors come from explorer v8 from 96-98, 94-95 crown...
  4. Drag Racing
    Specimen is a full weight 93 Notch with 302ci and an AOD. It is more or less your typical budget build with: 73mm MAF 70mm TB 24lb injectors Walboro GSS340 fuel pump (255lph) Cobra Intake GT40P Heads B303 Cam Shorty Headers / OR H / Magnaflows 10" 3,000 RPM lock-up stall converter Silverfox...
  5. Windsor Engine Parts
    GT40 tubular upper and Explorer lower intake $315 shipped GT40 tubular upper and Explorer lower intake. There is a dent in one of the runners (#1). Both have been thoroughly cleaned and are ready for paint or powder coat. Will include the bolts and a brand new gasket (between upper and lower)...
  6. Windsor Engine Parts
    Ford Racing Valve Springs (M-6513-A50) New in box, never installed. $95 shipped to the lower 48. PM me for fastest response.
  7. Miscellaneous Mustang Parts
    Any of you guys on this forum pulling a 5.0 out of an Explorer or Mountaineer donor vehicle that you bought complete? I need a front right-side lower control arm. I am not worried about the balljoint or bushings as long as the metal shells for the bushings are still in place and that the...
  8. Windsor Engine Parts
    I have two stock explorer intakes here they are both the same asking 100 plus shipping both have rails and injectors and throttle bodies. Let me know if you are interested.
  9. 5.0/5.8 Engine Tech
    Putting my mustang motor project into a ranger now. It has 4wd and I want to keep it that way. Will an explorer computer and wire harness work with a mustang motor? if so what needs to be adapted, if not what can I do instead? Thanks for any info here I know this is not all about mustangs so...
  10. Windsor Engine Parts
    For sale is a GT40 Style ford explorer upper intake. It has been sand blasted and never painted, and has been port matched to a 75MM EGR spacer. It has a small crack on the front most ear, and does suck a very small amount of air and did not cause any idle issues, but would obviously...
  11. Windsor Engine Parts
    Hey guys. I'm throwing a feeler for interest out there. I have a Explorer 5.0 complete with 30k miles. I had for a while, but never used. I bought it from a elderly neighbor of my parents who had it for years to drop in a roadster but never used it. I'm in the Los Angeles area. How much could I...
  12. 5.0/5.8 Engine Tech
    Hello to all, so as mentioned in my previous post, I am going through with a 5.0 swap in my bmw and had a pretty important question. I was told by a self proclaimed mustang guy that I can use the SN95 passenger side bracket and 3g alternator combined with a driver side bracket with a/c...
  13. Other Fords and Trades
    2002 Explorer Limited Truck is Sold. Please delete. Thanks Corral
  14. Windsor Engine Parts
    $200 OBO go ahead and lowball me tho. text me for any questions 714-496-7154 im in corona, ca.. local pickup will be easier. heres the craigslist link.. gt40 intake manifold + new gaskets
  15. Windsor Engine Parts
    heres a link. they need a little work. but they are clean. im in socal. text me for any questions 714-496-7154 gt40p heads
  16. 5.0/5.8 Engine Tech
    This is not another thread asking for flow characteristics or valve measurements. I'm trying to figure out if things like gaskets, valve covers, and other accessories are compatible with one another. I've got GT40 heads on my 5.0 right now, and when I went in for spark plugs I told the guys at...
  17. Windsor Engine Parts
    PRICE DROP!! $50 shipped for just the throttle body...$150 shipped for just the intake...or $190 for the combo This is an explorer GT40 upper & lower intake with 65mm throttle body for sale. The intake has already been drilled and tapped to be ready for a mustang. No plenum plate or screws...
  18. 5.0/5.8 Engine Tech
    I currently have a GT40 explorer intake (not yet on the car) and found a typhoon intake for a good deal,was wondering is it worth fooling with. Any recommendations between the 2??
  19. Windsor Engine Parts
    I have a nice upper and lower explorer intake for sale for $150 plus shipping (probably around $30). This intake does have EGR and it dose have the boss for the air temp sensor in the #5 runner, it is not drilled now but I will drill and tap it for you at no extra charge if you want me to. Both...
1-20 of 39 Results
Top