Morning, I have a 1992 Mustang GT 5.0 and decided to changed out my valve cover gaskets. During this process I installed new hoses on the intake, due to cracks. Now that I've put everything back together, the car will crank, but will not stay running. It'll fire up fine, but will not idle. I've...

Hey all! Hope you guys can help.Car runs rich apparently egr cods case limp mode I picked up my fox with an EGR/o2 codes and after a year of owning the car and many fixes and improvements for the life of me I cant figure this one out sometimes it goes for a bit but seems to be there for the most...

Long post – apologies ….EGR Problem - - the car is stock btw....I did a smoke test and I have a leak at the gasket where EGR valve meets the intake. I purchased a new gasket. I also took a look at the pipe that goes from the exhaust header to the EGR It looks very rusted and difficult to...

So I know there are alot of threads on this topic that have been posted before, however they always seem to get taken in the direction of whether or not EGR deletes are necessary, helpful, etc... I know deleting the EGR can hurt gas mileage, throw a CEL, and isn't great for the environment...

I've got a 70mm Holley Tb with a bbk/edelbrock spacer. Spacer has poor man egr delete and has the bottom bracket bolt cracked on spacer. Tb operates flawlessly but spacer does have a bad bolt hole for the bracket. 160 shipped. That's right at half price for the Tb before the 10 bucks to ship. If...

I am looking for a few things for my 1989 Mustang GT: 1. working set of eight 24 lb injectors 2. maf that's tuned for the injectors 3. IAC valve 4. EGR valve Thank you!

After replacing the plastic red, white, and green EGR lines (they broke on me when I was working on the car) with 3/16 rubber hoses, the CEL light code 332 (Insufficient EGR flow) comes on when I'm cruising at a steady RPM and speed and stays on until I shut off the car. I've checked the new...

Ok, this is gonna sound crazy, but when I first got my car a couple of weeks ago, I constantly heard a noise that I thought was possibly the input shaft bearing "rattling" because the noise was only when I was moving, and was constant while cruising, and went away when I got on the gas or let...

Hey All, Im new here, and looking for some help!!!! Ive had this same thing posted on two other forums with no help. First off, the car is a completely stock 95 GT convertible 5.0 with a stick. When i got it two weeks ago, it had new plugs, wires, cap, rotor, IAC appears new( very clean when...

Ford Racing 65mm Fox Throttle Bodies both are SOLD! Ford Idle Air Adjustment IAC Plate, part number F2PE-9F942-AA. $30 SHIPPED Professional Products Polished 70mm Fox EGR Spacer SOLD!

SOLD!

SOLD!

hey lately im thinking a 351/357 would be badass, i just need a 351 intake that has egr cause i live in California this edelbrock intake is the only erg 351 efi intake i found. would go well with 302 tfs 170 heads Edelbrock 3884 - Edelbrock Performer 5.8 EFI Intake Manifold Bases - Overview -...

SOLD!

SOLD!

I have the stock EGR parts for a 1994/1995 Mustang GT up for sale. This is all I have left of the system. I figured it might be useful to someone. Asking $50 obo + shipping Travis 904-234-5479 SOLD

so i got some new ford headers as im doing a pi swap. however i can not get the flange adapter out of the the stock manifold and i went to a million part stores and automotive stores i tried the two sided fitings and the end that goes into the header is fine but the end that goes into the flange...

SOLD Edelbrock Mustang 5.0L Throttle Body part# 3825 Edelbrock EGR Plate part# 3828 70mm 1986-93 Mustang 5.0L Brand new in the box! $225 shipped

Sold.

Hi Guys, I am building a new street engine for my 94 GT; a Dart 347 stroker with AFR 185 heads and a Kenne Bell Flowzilla. I live in CA, so passing smog is going to be very important. My question is regarding the EGR valve. Someone at Kenne Bell is telling me the Flowzilla isn't CA legal (even...