Search Results for ‘e303’

Does anyone know if I'm asking for trouble by replacing my crane 2031 with an e303 cam? It's been almost 20 yrs since I put the setup I have in there. I remember changing the pushrods too. Just wondering if since the 2031 was set up fine and worked physically (clearances etc.) will the e303 fly...

Curently i have the e303 cam, stock heads, bbk long tubes, and gt40 tubular intake, 3.73 geras, t5 tranny. I plan on pulling the motor and freshening it up. Also I wanted to throw on a set of ported gt40 3 bar heads and was wanting to upgrade my cam. Whats a cam that would be considered an...

Hey folks! Here's the skinny. I've got a stock 5.0 with a 2000 range torque converter. I need a cam to match that, like an E or B cam. Please let me know what you got! Thanks in advance!!

Hey corral, Need a E or B cam (cheap) to match my torque converter. Thanks in advance folks!

What's a good alternative to a B303 or E303 cam with a set of ported E7's or GT40's? I want something with a very lopey and rough idle. Thanks ALSO: Any advice on which heads to port (E7 or GT40/40P) would be appreciated. :)

So whats going on is some weird issues with bucking/jerking at low RPM, (minor) and more importantly, very little braking power. I'm only measureing 10 HG inches of mercury at idle (850 rpm) and about 15 at 3000rpm. 10 HG seems awfully low and I'm thinking it may be the cause of my problem...

Just pulled this out of a shortblock i bought was told it was a e303 cam but it reads compucam 2040 on the end of it also says 449358. In good shape dont know the mileage on it. Can email or text more pictures. $100 obo

As of now I have gt40ps, an e303, and an explorer U/L intake. I found a set of used trick flow twisted wedge 170's for a pretty good deal and I'm considering pulling the trigger on them but I have a few questions first: 1. If I do get the twisted wedges, would it be worth the money to get them...

I'm looking for a cam for my 1991 gt I don't have a lot of money so I can't "redo" my engine just looking for th basics. Mods are bbk unequal length headers, bbk catted h pipe, American thunder super 44 catback and bbk air intake I'm leaning towards and e or a b cam from ford my car isn't a...

I am selling an E303 camshaft I pulled from my Ford Racing crate engine. The cam has 30,000 miles on it and is in great condition. It is great as an N/A cam, nitrous, or supercharging up to 12 psi. I have a custom grind cam and no longer have use for the E303. I am selling the cam for $60 firm.

SOLD!