Ford Mustang Forums banner

dyno

  1. 5.0/5.8 Engine Tech
    Offical 347 dyno results thread Post you dyno numbers along with your set up. The reason is i plan on buliding a 347 stroker and trying to get some ideas. Thanks!
  2. GT & SOHC
    Hey friends! I hope this isn't too long a post, lol. Any input is so greatly appreciated!!!!! I need some tuning suggestions and questions answered with my swap, I have done mad research for months and called many places and always get different answers. My questions are next and if you want...
  3. Mid-Atlantic
    The beginning of summer means that CJ’s Customer Appreciation Day is right around the corner! What could be better than browsing a sea of Mustangs with your friends and family, enjoying free food and drinks, and meeting some of CJ’s staff and fellow car enthusiasts? Each year, CJ Pony Parts is...
  4. Southeast
    It's that time of year again! Injected Engineering will be hosting our annual Customer Appreciation, Car Show and Dyno Day on Saturday March 9th 2013. This is a huge event with prizes, raffles & complementary food and drinks. Last year we had over 500 people attend! We appreciate your support...
  5. CJ Pony Parts, Inc.
    The Gotta Have Builds team has learned a lot about Gotta Have It Race during the last few outings and feels they are headed in the right direction, and ready for this weekend’s final race of the year! Before the 5.0 Shootout at Maryland International Raceway in late September, the team added a...
  6. 5.0/5.8 Engine Tech
    Well drag season is pretty much over here so I'm going to going to put together my new combo and dyno it. Guess what kind of power it will put down and what it will run at the track 351w block bored .10 over forged flat top arias pistons I'm guessing around 11:1 compression forged h beam rods...
  7. CJ Pony Parts, Inc.
    After a few more changes for Gotta Have It Street, it was time to see how these performance upgrades would translate on the dyno! If you recall, when we hit the dyno last month, Gotta Have It Street measured in at 349 horsepower and 313 ft./lb. of torque. Last week, we took Gotta Have It Street...
  8. S197 Mustang GT (2011-2014)
    With the 2013 Mustang rated at 8 more horsepower from the factory it baselined slightly higher than other cars we have done. Thanks to the higher baseline numbers the spread from stock to cold air and tune is a little less but still very good and worth the investment. Maybe with exhaust work you...
  9. Superchargers
    I installed a Procharger on an 03 GT, 5spd. My local dyno is backed up, and they don't know when they can get me in to tune. I have the SCT X3 tuner. Does anyone have a tune file I can use to get me by until I can get on the dyno? Engine is stock except for the procharger. 8lb pulley, 2 core...
  10. 5.0/5.8 Engine Tech
    Just posting this here for people that don't go to the turbocharged forums. (with Video) http://forums.corral.net/forums/turbochargers/1295361-new-dyno-numbers-924rwhp-986rwtq.html *****
  11. Turbochargers
    Steve Petty tuned my car on the dyno last week and with the Methanol /water injection, bigger 120#/hr injectors and Petty's tuning skills the car made 924rwhp/ 986rwtq with less boost and a very streetable tune. I only had a few gallons on VP109 race gas mixed with 93 octane pump gas so we could...
  12. S197 Mustang GT (2011-2014)
    Well after a lot of hours of work on my car by the [email protected] Diablosport. Here are the results. Thanks To Mike and Max for making this mustang owner VERY happy:salute: the results are in. from pump 93 to pump 93 and a tune. 370 to 392 RWHP:eeek: 329 to 366 RWTQ:eek: this is on 5th gear ( the...
  13. GT & SOHC
    Just had my car dyno tuned by Mike at DEZ racing and the numbers are very impressive. 300 HP and 333 ft/lb of torque. Mike had my car dialed in after only 3 pulls and the car runs better than when I bought it stock. If you look at the graph you can see that the PI intake cannot keep up with...
  14. GT & SOHC
    Greetings all. First of all, let me be the first to say "hindsight is 20/20". That being said, feel free to slam me for not asking these questions before I bought my ride :) I've had a couple mustangs before (96 GT and an 03 cobra 'vert) but then there came the kids. So I settled for an 04 gto...
  15. Southeast
    This is the second time I've brought a car to six sigma, first was for my school's Dyno day, and today was because Six Sigma gave away 6 free dyno spots for reaching 1000 fans on facebook.. Both times they've been very helpful and professional. They've got a dyno dynamics dyno and are one of the...
  16. S197 Mustang (2005-2010)
    The guys that dyno'ed my car posted a video. My car is at about the 2:17 mark. Not really much to see. They show the graph from the original pull they did before dialing the tune back. It made over 520 rwhp but the MAF and injectors were done. They backed it off to 499 rwhp. Paxton Novi...
  17. Advertiser's Showcase
    Click on the player in the link to see the promo video here- http://www.brothersperformance.com/news.php?nak=26 Hey all! Just wanted to drop you a line to tell you about the upcoming Brothers Performance East Battle Of The Brands dyno challenge coming up on Saturday December 12th 2009 from...
  18. S197 Mustang (2005-2010)
    Here it is, our official production CAI for the '10! http://www.steeda.com/products/2010-ford-mustang-cold-air-intake.php And here it is fitting snugly into it's new owner. If you take a look at the dyno sheet below, peak numbers really dont tell the whole story. The peak increase is in...
  19. 5.0/5.8 Engine Tech
    after hours of searching i cant find squat!!!! so post your 351w numbers. NO STROKERS please. I am building a mild combo and wanted to real world proof of what others have made. My combo is 94 roller block, spreed pro trw 2446 4.030 pistons, stock crank & rods, trick flow stage 2 cam...
  20. GT & SOHC
    Headed over to Proven Power in Tampa FL for my first base line dyno run. only thing that the car had installed was the diablo factory tune. 02 auto GT First run 219.91 hp / 254.10 tq Second Run 218.38 hp / 252.87 tq The car was pretty heat soaked from the ride...
Top