Search Results for ‘driveshaft’

I just got my 86 SVO running again after sitting for a few years. I installed an aluminum drive shaft years ago. One thing I forgot about was the terrible vibration / noise on deceleration when in gear. It does not do it on acceleration. Noise appears to be coming from the tail of the...

1990 Mustang GT Manual T5, this noise occurs whenever I drive for more than like 10 minutes, stepping on and off the gas does not help, braking or not braking does not help, being in neutral or in gear does not help. The only thing this noise stops is right when I hit about 3 mph coming to a...

I have a new in the box steeda driveshaft spacer for Mustangs. It comes with the longer driveshaft bolts. I bought it new for $55 plus shipping. My lost your gain. I'll sale it for $40. PM me or call/text me at 3013953921 if interested.

I have a nice lightly used aluminum driveshaft out of a fox body with a TKO600/8.8 diff for sale. $150 OBO.

Selling a ford racing aluminum driveshaft with 28 spline yoke. Asking $165. Ford Racing Aluminum Driveshaft '79 to '95 Mustang | eBay

'79 to '95 Fox Mustang Aluminum Driveshaft Selling the aluminum driveshaft shown in the pictures. Measures 45.5" center to center in length and has a t5 yoke. Also have it listed on ebay for $180 but will knock some off for Corral users, make an offer. '79 to '95 Fox Mustang Aluminum...

2000 Mustang. Prefer Stifflers.

I need a TKO bellhousing and an Aluminum Driveshaft either 28 or 31 spline. This is for my 93 Reef Coupe Thanks Located in San Antonio TX

I purchased this about 10k miles ago for my Mustang but just switched to a T56 transmission so I had to get a different driveshaft that is shorter. It was purchased from American Muscle 2-3 years ago $150 + actual shipping to US. Please ask if questions I just pulled this off my car 3 weeks...

STD. POWERGLIDE YOKE, TO 8.8 4BOLT FLANGE, NEW JOINTS, STEEL SHAFT, 49 1/2" LONG CENTER TO CENTER SHAFT LENGTH. FOX BODY STANDARD ENGINE LOCATION WITH POWERGLIDE AND 8.8 REAR...

I have a brand new in the packaging arp oil pump driveshaft for a sbf ford 302. It was taken out of the packaging but never installed. I'm switching over to a 351w and didn't realize the shaft was bigger on the 351. So if anyone has a 351w shaft they would like to trade for a 302 let me know...

RED HOT DEAL: Ford 05-10 Mustang Gt -5 speed and Auto 1-piece aluminim shaft with cv joint. 3-1/2 inch good for 900 HP. This was built by the Driveshaft shop. $800 new. I will let it go for $400 plus shipping. You can call me a 262-497-9484. Bob SOLD

11-14 1 piece Driveshaft Looking for a 1 piece driveshaft. 2014 5.0 Automatic.

SOLD!

SOLD!

I have a 31 spline slip yoke from a FRPP Aluminum drive shaft that i don't need anymore. The yoke has about 6k miles on it and is in perfect shape. Only reason i'm selling it is because i'm using a T5 with 28 spline yoke so i just swapped this off. Looking for 70$ shipped. Oh and i believe it...

Everyone has been asking for prices so here they are. Zex Nitrous Kit with 2 bottles with billet bottle holders, 2 heaters, Cup Holder Switch, Nx Purge Kit -$800.00. Aluminum Driveshaft - $500.00 The driveshaft will require the adapter plate to be a direct bolt in for your Gt. I called the...

SOLD!

Selling my Ford Racing Performance Parts Aluminum Driveshaft. It fits 79-95 mustang 5.0's. Comes with shaft, both u-joints and rear flange all as pictured. Slip yoke is not included(nor is it pictured) $155 plus shipping Email [email protected]

Selling the following: Griggs Severe Duty Panhard Bar Alum w/ Hiem Joints $100 Griggs Adjustable Length Aluminum RLCA's w/ Hiem Joints $200 Low Profile Aluminum TA 8.8 Rear End cover $100 Griggs Single Adj. Koni c/o Front Struts w/springs and camber plates $900 Griggs Dbl Adj. Koni c/o Rear...