Ford Mustang Forums banner

drag racing

  1. S197 Mustang GT (2011-2014)
    Hey guys, I'm on mustang #3, this is my first 5.0, I have a 2012 Mustang GT premium, with just over 40k, I bought it October of last year, and I had it stored all winter. I've been tracking it this summer, and I am having serious clutch return problems, it's not returning to me properly when I'm...
  2. Southeast
    Fun Ford Weekend | September 12 - 13, 2014 From Ford-powered and Ford-bodied bracket racers looking to earn some "cred" on the Drag Strip to Blue Oval restoration experts showing off their finished masterpiece or searching for that hard-to-find part at the Swap Meet, Fun Ford Weekend at Palm...
  3. Southeast
    A Party 20 Years In the Making! Friday Night Hooters Party Kicks Off NMRA 20th Annual Spring Break Shootout at Bradenton Motorsports Park in Bradenton, FL Santa Ana, Calif. (February 21, 2014) - What would the Nitto Tire NMRA Spring Break Shootout be without a Spring Break style party? Kick-off...
  4. Drag Racing
    There will be a Thursday Test and Tune session at the Nitto NMRA Spring Break Shootout at Bradenton Motorsports Park, March 6-9 and at the Ross Racing Pistons NMCA Muscle Car Nationals, March 20-23 also at Bradenton Motorsports Park. Both sessions will be from Noon to 5PM. Take advantage of the...
  5. Southeast
    Do you think your manually shifted Ford-powered street machine is one of the quickest in the country? Well, you won’t want to miss this! Long-time NMRA True Street supporter, TREMEC, in part with Muscle Mustangs & Fast Fords magazine, has announced that they will once again hold the “Stick Shift...
  6. CJ Pony Parts, Inc.
    You've seen Product Specialist, Bill Tumas, in our YouTube installation and product videos, and you might have even seen him around the CJ Pony Service shop or at one of the several CJ events we hold annually. Now, we want to share some of his story with you, including a bit about his 1996...
  7. S197 Mustang GT (2011-2014)
    First time down the 1320 last night. Made the Drive up to New England Dragway. The car ran great, but with my nearly bald all seasons, traction was almost impossible (as expected). However, the car an better than I thought. Ended up going 12.4 @ 116 with a 2.1 60' After that, it was wheel hop...
  8. CJ Pony Parts, Inc.
    CJ Pony Parts [email protected] pass Nov 24th at Cecil County Dragway Despite the assertion that Gotta Have It Race was done for the year, Bill and the Gotta Have Builds team were determined to see if it had a little more in it and could hit the 11.20s, if everything could go just right. Bill and...
  9. CJ Pony Parts, Inc.
    One week ago, we posed the question “How Fast will Gotta Have It Race run at the ABM Nats?” and received a huge response from our followers on Facebook and Google Plus on what MPH Gotta Have It Race would hit during one of its last times out for the 2012 race season. Our last blog shared all of...
  10. General Mustang Tech
    As I upgrade my 2003 GT’s rear suspension my car gets more weight transfer off the start but spins the tires worse than stock. Once she is moving though I have GREAT weight transfer and traction. Today I experienced bad wheel hop for the first time on the wet street. Here is my suspension set-up...
  11. CJ Pony Parts, Inc.
    The Gotta Have Builds team has learned a lot about Gotta Have It Race during the last few outings and feels they are headed in the right direction, and ready for this weekend’s final race of the year! Before the 5.0 Shootout at Maryland International Raceway in late September, the team added a...
  12. CJ Pony Parts, Inc.
    Congratulations to our own Bill Tumas, who, with Gotta Have It Race, is featured as the cover article in the December 2012 issue of Race Pages! Race Pages is the official magazine of the NMRA Keystone Automotive Ford Nationals series, which is the series that the entire Gotta Have Builds team...
  13. CJ Pony Parts, Inc.
    The Gotta Have Builds team has been busy over the past few months modifying and racing Gotta Have It Race and Gotta Have It Street, but haven’t been to too many car shows or big Mustang events. Well, from July 16-22, that changed, as Rick and Tommy headed to Myrtle Beach to correct that at...
  14. CJ Pony Parts, Inc.
    What a weekend for the Gotta Have Builds team! After setting some new records last month in Milan, MI, the team took Gotta Have It Race to Joliet, IL with winning the NMRA/NMCA Super Bowl of Street Legal Drag Racing in mind. Read on to see how their weekend went, and how they ended up taking...
  15. SVT & DOHC
    Sup guys (OGs from the 90s) long time no talk. This message goes out to anyone that has been screwed legally speaking by Al Papitto of the former Boss 330 Racing. A friend of mine had been waiting over 2.5 years for PRE-PAID ported 4v heads and they were recently shipped back to him (after...
  16. Rims Wheels and Tires
    $500 I have 4 weld draglites for sale. Fronts are 15x5 and rears are 15x8 with 3.5" backspacing. Rears have 275/60R15 Mastercraft Avenger G/T tires on them, but the front tires need to be replaced. Local Pickup only (Southern Indiana) 4th wheel is currently installed on car for mockup...
  17. CJ Pony Parts, Inc.
    Last month, the crew from CJ Pony Parts took Gotta Have It Race and Gotta Have It Street to the NMRA event at Maryland International Raceway and had such a great time, that we decided we wanted to do as many NMRA events as possible. The next event scheduled was on June 14 & 15 in Milan...
  18. CJ Pony Parts, Inc.
    Well now that all the events are posted and updated on our Facebook Page, if you haven't liked us yet, then go ahead and do that and check out where we will be at this year. We also started a Cruise In every second Friday of the month so be sure to stop by one of those this summer. Our next...
  19. CJ Pony Parts, Inc.
    Gotta Have It Race gets its first modifications! CJ Pony Parts Gotta Have It Race 2013 Mustang GT Gets Its First Modifications! - YouTube We made it less than one week before we started making a few modifications to Gotta Have It Race. Of course, we did have to get ready for the track this...
  20. Suspension
    I have a pair of lakewood 90/10 front struts fits any mustang 79-93 they have about 5,000 miles on them $120 thanks.
Top