Ford Mustang Forums banner
1-20 of 48 Results
  1. Modular Engine Parts
    Looking to buy 4.6L DOHC short block asap. Im located in Sothern California and can travel some for a good short block.
  2. Member Build-Up Projects
    I thought I would share some pics of my 4.6 DOHC Swap that I completed last year. I started this project 9 years and 3 kids ago. Its basically an aluminum block 03 cobra motor with a GT500 M122 bolted to a Viper T56. I used 94 Cobra brakes including the ABS and I am running the MS3 Pro for the...
  3. SVT & DOHC
    I have recently purchased a running motor out of a 1999 cobra, and when it was out I had noticed it had some different tags and markings on it. The heads have the castings are RF-YR3E-6C064-AB and the block casting are RF-FL2E-6015-HE it also has another tag on the block that says 06/28/2011...
  4. Interior Parts
    Complete Black leather interior out of 1997 Cobra, excellent condition with minimal wear on bolsters, all panels and seats included. $500, buyer pays actual shipping costs or pickup in Eastern North Carolina (28574). More pictures available upon request. 910-545-6864
  5. Modular Engine Parts
    Selling parts off of my DOHC. The engine is supposed to be fairly fresh with no known issues. I believe the long block was from a mid '90's MK VIII based on the 6 bolt crank and date stamps in different places. All prices are plus shipping and are obo, very open to offers. I'm open to selling...
  6. SVT & DOHC
    I'm currently modifying my 01 GT harness to use with my 5.4 DOHC swap. I did a search and found that people were talking about removing the pins and swapping them on the connector but no one goes into detail about how to do it. I've extended my harness and I am about to reverse the polarity of...
  7. SVT & DOHC
    i have a question on checking connecting rod side clearance. I believe the procedure is to push both rods all the way to one side. And have it touch the crank. Then use a feeler gauge to measure the gap to make sure it's in spec. my question is that after that is done do the rods need to be...
  8. SVT & DOHC
    I have a 5.4 DOHC from a 2002 Lincoln Navigator. I removed the oil pan and found two plastic clips. After removing the timing chain cover and examining the guides they looked in better shape than the plasctic pieces that I found. I think I found the location they go but Im not sure if Im...
  9. Superchargers
    What's the most power to be made with a Vortech S-trim? I'm building a new engine with forged internals. Compression is at 10:1, IW 10% overdrive balancer, ported 04 Cobra heads, custom ground blower cams, custom front mount intercooler, and a 2001 Cobra intake.
  10. SVT & DOHC
    Hey I'm getting ready to drop in my 02 Navigator 5.4 into my 2001 GT Mustang. I believe I have everything I need except the exhaust figured out. I searched around and found out that people have used the stock Navigator Exhaust manifolds with some minor modifications, and other use Cobra/Mach1...
  11. SVT & DOHC
    I picked up a wrecked 2003 Azure Blue Mach 1 with less then 20xxx on the car for a great price, unrepairable, but the Drivetrain is perfectly fine. I am going to be swapping this into an 03 V6 5 Speed i've had for a while that I got for free. Going to be all stock for the swap until i know that...
  12. Modular Engine Parts
    Looking for a complete 99 cobra motor so i can do a 4v swap on my car. Engine needs to include all necessary parts (intake manifold, all wiring and hoses, ECU etc). I'm looking for the "plug and play" engine that someone out there is trying to get rid of. Contact me Via Text for the fastest...
  13. Power Adders For Sale
    Located in central CA Polished compressor for 1996 - 1998 cobra's with chrome brackets and crossover tube complete except except for idler pulley belt and oil lines comes with mass air meter kit is used but in excellent shape call for details do not email 661-903-6700 $2200.00 thank you
  14. SVT & DOHC
    Hey everyone. I have a 1997 mustang cobra svt 4v dohc. And I'm having a problem with the car repeatedly dying in neutral. Idk what it is?? I changed out so far: maf sensor Egr valve 02 sensor Iac valve The cars mods are Jlt cold air intake Off road xpipe Mil eliminators Ford racing...
  15. Exhaust Parts
    EVERYTHING IS SOLD SOLD I have a Cold Air Intake with a K&N Air Filter for sale from a 97 Cobra. I was told it was a JLT but I can't identify a badge on it. I have a attached a picture for viewing and can send more via text if interested. $75.00 plus shipping and paypal fees SOLD SOLD I have a...
  16. Modular Engine Parts
    I have a 5.4 from a 2004 navigator. The motor will come with OEM intake manifold and some engine wiring and also the flywheel. $800 firm. I'm located in stuart florida. Motor ran when removed.
  17. Mustangs For Sale/Wanted, 1999-2004
    For sale is my 2004 Mustang Mach 1, Price: $14,000 obo , miles: 68k. Upgrades include: -18 in DOHC Rims, -JLT cold air intake -Steeda Short Shifter kit -Steeda Interior Dress up kit -JLT Catback Pics...
  18. Mustangs For Sale/Wanted, 1994-1998
    Super clean 97 Cobra **Price reduced** Car is not for sale. Mods please feel free to delete this thread.
1-20 of 48 Results