Search Results for ‘distributor’

Has anyone on here had any experience with one of these distributors? I'm weary of anything you pair to a cellphone or ipad, but it seems like if its well built there should really be no drawbacks. This would eliminate the need to get a seperate igntion box (they're coming out with one within...

I have a 92 tbird with the 5.0 (should be same as 94-95 mustang 5.0) and I am looking into getting a crab cap distributor for my engine to help with clearance on my M112 supercharger build. This is a budget build so I don't want to buy the MSD distributor with the cap but only switch the cap...

Up for sale is a MSD Pro Billet distributor, P/N 8455, that is for 94-95 Mustang 5.0L. This was on my SEFI converted classic Bronco. I'm in the process of building a 363 and have switched over to a Hi Ram intake, so I can no longer use this one. Working perfectly when removed. Cosmetically...

Question for you all. I have a carbed 5.0 swapped 89 lx coupe that was an original 2.3 car. It’s been swapped for over 20 years and recently it has developed an issue with it not wanting to run after sitting for a a day or so. When I first start it, it will run for a minute or two then all of a...

Hello, I have a 94’ mustang GT 5.0L and put a Vortech V1 supercharger on it. The same guy I bought the supercharger from sold me an Accel DFI ECU/Harness, ignition box, and an Accel DFI dual sync distributor. The drive train is sitting in a 66’ F100, so I got a new fuel system for it and put...

So now I think only 1 problem to fix before I can put the car on road. This is what I’m facing now. I recently changed my intake and had to take the dis out. Now I can’t seem to figure it out. My balancer doesn’t have timing written on it. So when I did try to put the dis back in after finding...

Hi everyone, I’m new here so if I’m formatting my post wrong or anything just let me know. Recently I picked up my first ever project car, a 1983 GLX with a 5.0 HO. I had to fix an oil leak between the intake and the block so I had to pull the distributor to change the gasket. When I did that I...

Hey what's up guys,I have an oem ford 302 efi distributor from a 1992 ford mustang. Still in really good condition. $60 obo shipped. Have a great day everyone!

SOLD I bought this a while back for my 351w build, but I am going Holley EFI route and bought a Holley Dual Sync distributor. This is brand new in the box, only opened to look at and take pics. Part # 60204a.

Hi, I'm looking to swap a rebuilt 01 mountaineer 5.0L into my 94 Cobra. My current motor uses a distributor for ignition and the mountaineer motor I'm looking to put in uses coil packs. The 01 Mountaineer/Explorer motors had GT40P heads and GT40 upper and lower intakes if that helps at all. I am...

MSD distributor part#8455. Fits 1994-95 mustangs. In great condition. Has new cap and rotor. I'll sale it for $150. PM me or call / text me @ 3013953921

I currently have a 1994 Cobra with a 302 from an unknown swap as I was not the original owner (possibly from an f150 due to pulley setup). This motor has well over 250k miles on it and I feel it is time to build a fresh motor and trans for it. I searched the past few weeks for an explorer or...

MSD blaster coil $20 Stock coil $10 Coil bracket $5 Autometer tach with bracket and shiftlight $80 shipped Stock distributor $25 (I have 2) Stock maf and housing $15...also have one from the newer all plastic style maf Everything came out of a running car, just been sitting since Buyer pays Shipping

Alternator - $50 shipped Starter from a 93 mustang which is much lighter and smaller than a normal fox starter and I believe has more torque too..Good condition - $50 shipped 2 good used efi distributors with tfi modules $45 shipped each If buy more than one I can give a better deal Will put...

SOLD SOLD SOLD SOLD My other stuff for sale (will combine shipping, make deals, etc.) EGR Valve: http://forums.corral.net/forums/windsor-engine-parts/2149146-ford-egr-valve-low-miles.html FRPP Roller rockers...

MSD distributor 8582 billet, magnetic trigger, mechanical advance SBF short deck. Used $179. Will ship, Paypal friendly, located in Dayton, Cincinnati area. Thanks, Ken

I have a MSD 8451 distributor for a 351w for sale. This distributor has about 2500 miles on it and is in perfect working condition. I was planning on building a 351 for my 95 GT but more important issues came up so i'm selling off all my swap parts. This would be the perfect dizzy for anyone...

Mallory 9155101 MALLORY UNILITE DISTRIBUTOR FORD 221 255 260 289 302 302BOSS COMP 9000 WITH HEI STYLE CAP. Was in a motor I purchased but ended up using a different distributor. I did get spark from the motor with this one, so I know it's good to drop in and go. Just cleaning the garage and...

Hey guys, so i recently bought a distributor off the classifieds here. I got the distributor the other day and was cleaning it up and i noticed when you spin the shaft, the wheel that the rotor button sits on wobbles when it's spun... Is this normal or something that needs to be repaired? I was...

Accel 351w billet TFI distributor - brand new in the box, never run or installed. Part number 60204A. Purchased for a vehicle project I no longer own. Complete with cap, rotor, TFI module and paperwork. All made in USA. $175 shioped