Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. General Mustang Tech
    So i've just completely rebuilt the rear-end of my 1990 fox for the first time and replaced the 2.73:1 ratio with the 4.10:1. When starting, it's advised to reuse the pinion shim from the original pinion gear however we deemed that we were not able to shim the ring gear enough to account for...
  2. Drivetrain Parts
    I'm selling an Auburn Pro Series 8.8" limited-slip differential for 31-spline axle shafts (Ford Racing part number M-4204-P31) with Richmond installation kit (83-1043-1) The bearings have already been pressed onto the differential. I bought this new in 2003 for an 88 couple build but that...
    $500 USD
  3. General Mustang Tech
    Hello Diff Experts. Is it significantly risky to re-use the original Lock Bolt for the Differential's Cross-Pin? (With LocTite I would add upon re-installation) I used a 6-point 5/16" wrench to remove the Lock Bolt. It is the original Ford Lock Bolt and it only has been removed this once...
  4. Suspension
    SOLD Complete 8.8 rear end for sale $100 Full rear end, has 3:73 gears, 5 lug swapped (retained drum brakes), includes e brake cables. No issues. I've since swapped to IRS, so I have no need to hang onto this. I'm hoping somebody local to the ORLANDO area can use this - I'm in Altamonte...
  5. General Mustang Tech
    Hello, this is my first rear end job on my 1995 mustang Cobra and wanted some feedback. Just a little about my project. Redid the engine, 347 stroker, and replaced tranny, TKO 600 with aluminum driveshaft. The final step is to strengthen the Cobra's rear end so i purchased Ford Racing kit...
  6. Drivetrain Parts
    looking for the foxbody version of this: Ford Racing Mustang SVT Rear Axle Assembly M-4001-A373 (05-14 All) - Free Shipping. dont need brakes, or control arms or anything else. Just a sealed one of these. If anyone has one in the south florida area let me know how much you want for it.
  7. Drivetrain Parts
    I took this out of my 89 8.8 because I needed to make the car streetable. I believe it came as a package deal with the axles. The axles are Mosier. I was told when purchased the car it had a Mosier spool, but can't find "Mosier" anywhere on it. You can see in the pictures a P/N. $100 plus...
  8. Drivetrain Parts
    Brand new in the box Yukon 8.8 duragrip posi for 28spl axles. It has chrome-moly internals and is rebuildable if anything ever goes wrong but does come with a full one year warranty from Yukon. asking 400$ plus shipping located in 31316. my number is 912-318-2581 for quicker response Auto...
  9. Drivetrain Parts
    I need 4.10 gears, trac-lok diff, girdle cover, and a t45 clutch fork. Lemme know what ya got!
  10. Drivetrain Parts
    Changed the gearing on my car and these have been pretty much collecting dust. Looking to get around $100 for them plus shipping. these is a ford racing 3.73 ring and pinion set email me at i991mustang @ aol.com Thanks, Chris
  11. Drivetrain Parts
    Ford Racing Traction-Lok 28-Spline Posi-trac Diff For sale is a used 28-spline Ford Racing Traction-LOK differential (M-4204-F318C). "Ford Racing Traction-Lok differentials optimize your vehicle's traction by transferring the power to both rear wheels. These limited slip differential units...
  12. GT & SOHC
    Hello everyone, I know this is a long post but I would really appreciate if you guys took the time to read this over, it's a problem I've been trying to diagnose for almost a year now. I've had a pretty distressing noise coming from my mustang since I purchased the vehicle. The best way I can...
  13. Drivetrain Parts
    Stock 8.8 differential and 28 spline axles out of a 92 mustang. Trac-loc only spins one wheel so needs to be rebuilt. $100 plus shipping for everything
  14. General Mustang Tech
    Quick question. Do a axle c clips vary from fox to sn95 to s197?
  15. General Mustang Tech
    I have a 92GT and im planning on switching to 5 lug axles. Are explorer traction locs worth putting in my rear or wheel i soon have the one wheel spin like i do now?? trying to make a decision soon, Thanks
  16. Drivetrain Parts
    Im looking for a tru trac 8.8 differential, i may trade my 8.8 detroit loker for it. BUT would rather pay cash
  17. Drivetrain Parts
    Brand new in the box (with plastic) trac lok rear diff. no more single wheel peel. $200 - lists 300 and Ford will sell it you for 288. I called. My Bronco rear end came with everything. extra part. 949.439.9273
  18. Drivetrain Parts
    I am changing out my axles this week to a 31 spline. I have the 28 spline axles with studs and the stock posi differential. I hate stuff sitting around so im asking 75+shipping for everything...thanks Im in ohio for anyone that wants local pickup. Also i have paypal.
  19. General Mustang Tech
    I am new to this site and am really liking it. I have a question about a differential for my 2000 mustang gt. I have the 31 spline moser axles order and am looking for a carrier. I have been looking at the obx helical lsd and was wondering if anyone knew anything about it or could explain it...
  20. General Mustang Tech
    Took the rear end out of an 89 to clean it up. When I took the shocks off, they relaxed and spread out appx. .5 to 1 inch. They are newer shocks.... thinking that I will not be able to push them in to match the holes when installing the rear. Wondering what is the best way to get the rear...
1-20 of 24 Results
Top