Ford Mustang Forums banner
dart
1-20 of 26 Results
  1. Windsor Engine Parts
    Looking for an oil pan to fit 4-bolt dart block 351w Jason
  2. Windsor Engine Parts
    SOLD! I am parting out my 1987 Mustang GT that I bought when I was 17 (30 now) in order to pay for my wedding. This is the listing for the engine. The engine can be bought as a complete engine (without front accessories) or longblock, or shortblock only. Engine is currently in the car and runs...
  3. Mustangs For Sale/Wanted, 1987-1993
    1987 mustang 5.0 black with black interior. Dart 8.2 Deck Block 368 CI Full Machine work - zero decked, line honed, full custom machine work 4.155 bore etc. -Custom Grind Cam by Ronnie Crawford -Billet Caps -Coated Cam, Rod and Crank Bearing -Scat 3.4 Stroke Crank ( 28 oz ) -Scat 5.4 H beam...
  4. Windsor Engine Parts
    Hey guys thanks for looking, I have a 1992 LX notch that i have a first gen hellion turbo kit on... The motor is stock and can't handle much more... on 6psi i'm making 383rwhp and on 12psi 451rwhp... Since their is no point doing anything to the motor cause I'll push it over the edge i'm...
  5. Mustangs For Sale/Wanted, 1994-1998
    1994 Mustang Cobra (real by the VIN) black on black. I am the second owner of this car and purchased it 16 years ago from the original owner that had only put 8k miles on it. The paint is original and in excellent condition with the only new paint being on the H.O. Fiber Trends (original...
  6. Windsor Engine Parts
    I am selling my hardly used (1500 miles conservative estimate) Dart Iron Eagle 331 with Trick Flow 206 Race cnc heads. All ARP bolts and studs from the rockers arms down to the oil pan. Crane Gold Race 1.6 3/8 arp stud mount, Bennett Racing custom blower cam, JE 4340 forged 9.5:1 pistons, Eagle...
  7. Windsor Engine Parts
    I am selling my hardly used (1500 miles conservative estimate) Dart Iron Eagle 331 with Trick Flow 206 Race cnc heads. All ARP bolts and studs from the rockers arms down to the oil pan. Crane Gold Race 1.6 3/8 arp stud mount, Bennett Racing custom blower cam, JE 4340 forged 9.5:1 pistons, Eagle...
  8. Windsor Engine Parts
    Helping my buddy sell his block he picked up. Was going to build up the car but other life priorities took over so he's selling off his go fast parts. Dart Ford 8.2 Deck SBF Aluminum Block -4.030 Bore -Wet Sump -Std SBF Main Size -Std SBF Cam Size -Std SBF Cam Height -Will accept factory style...
  9. Interior Parts
    I am selling my 2001 Cobra front seats and rears. The rears have never been sat in, and have been rewrapped in fox body foam. I have the brackets and the metal piece for the rears. -Matt I will trade for 2 kirkeys with the fox body brackets and black or grey tweed covers
  10. Windsor Engine Parts
    205 /72cc afr headed windsor, .030 over, eagle crank/rods, arp studs, canton fox oilpan, 157tooth flexplate, rpm balancer, comp hyd roller lifters, comp pushrods, crane gold and comp. roller rockers, ford motorsport valve covers, msd 351 distributor.... NEEDS 180$ WORTH OF BEARINGS, NOT...
  11. Windsor Engine Parts
    -Dart SHP block 408w, eagle 4340 forged crank internal balanced, eagle 4340 forged H beam rods, arp bolts, mahle -22cc forged pistons. Have brand new in box Total seal AP rings for boost($400). Also have brand new in box custom ground hydraulic roller cam for turbo setup made for this motor...
  12. Mixed-platform Engine & Drag Racing Tech
    I am wanting to trade my setup for a coyote swap for a foxbody. I have a lot of money and nice parts in this setup and it is all fresh. Here's what I have. Dart 9.5 block 408w. 4340 forged crank, eagle 4340 H beams, mahle -22cc dish pistons. Neutral balanced crank. ARP hardware in bottom end...
  13. Drivetrain Parts
    i just put in a 363 dart block with 88mm turbo shooting for [email protected] and around [email protected] so the tranny has to be built...i already got prices on new builds im just seeing if i can save some dough so i can fund the rest of the project
  14. Windsor Engine Parts
    I took a block on trade and don't have time to mess with building a car. So here's the specs: Square decked to 9.502" Bored/honed to 4.145" bores (honed for AP Steel rings) 2.75" mains (4 bolt center three caps) Standard cam tunnel Standard lifter bores Dart Babbitt cam bearings Ready to...
  15. Mustangs For Sale/Wanted, 1987-1993
    This is my baby and I hate to sell it.. I just finished the build, and now my situation has changed and I have to sell it.. It has 500 miles on the motor and 90k on the car.. It was completely stock when I bought it.. Very clean inside and out. All work was done by Ramsey's Performance in Tampa...
  16. Mustangs For Sale/Wanted, 1987-1993
    ---TT 8sec Streetcar Fox--- 1992 Lx Hatchback Strawberry Metallic Trades:NONE I do not have to sell this car I have title in hand just to clarify. I am in no hurry to sell as I do like this car alot just strictly entertaining the idea of what offers could present themselves. Any questions...
  17. Windsor Engine Parts
    I'm looking for a Dart or Sportsman 8.2" deck heigh (i.e. 302 based) bare block Preferrably it is already notched for a stroker kit and bored to 4.040 but if not I still want it. It looks to me that new these go for about 1800 or more, and I need to do a little better then that. Let me know...
  18. Windsor Engine Parts
    Looking to buy a good aftermarket 8.2 deck Block. So far it looks like the benchmark is 1800 shipped in the "new" market. Looking to do a little better than that if possible. Thanks
  19. Windsor Engine Parts
    Posting this for a friend, hes got a set of TFS TW 170cc ( isky springs, titanitum retainers, harland sharp 1.6rr's hyd roller setup) , but just got a 331 shortblock, wants a set of 205cc heads for it, hes got money said $1500 is hisl imit due to the entire car budget, but also is willingif...
1-20 of 26 Results
Top