Search Results for ‘cylinder’

This is my first post on here but, after reading everything on this forum for help in the past, I've finally decided to reach out for some input on what could be causing the problems I'm having with my 2000 GT. For starters, I've learned a lot about my car over the last two months, I've...

347 stroker and Windsor SR heads and more 347 stroker w/ stock block Scat forged crank directly from machine shop still in bag Forged Ross XL400 pistons Not sure who makes the rods Main studs w/ main girdle Main caps were grinded for more surface for the girdle to contact Cam bearings were...

AFR 185 Renegade Heads #1420. I bought them used from a good friend. They were in great shape but I took them to Wells Racing Engines / Cylinder Heads to be checked out anyways & everything is good on these heads. Had them deck the heads just to be safe, then I test fit one of them, and realized...

Probably asked thousands of times but I need straight answers... Is there a factory manual master cylinder that will swap onto the adapter plate then onto the firewall? I've seen the dodge style ones, any info on that? What is the bore size of an 88 mustang? Thank you.

Ok so after a few evenings of searching and not really coming up with anything, I'm gonna ask for some help. I was driving my 96 cobra home a few nights ago and was slowing down for a red light when all of a sudden my brake pedal goes all the way to the floor, I panic a bit but pump it a few...

okay so i was thinking of getting a new Ed Curtis cam but dont know if i should wait. i want to do a 306 eventually but wont happen till next year probably. current set up is... -TFS track heat intake -70mm TB -cold air intake -TFS 170cc heads W/ 1.6 roller rockers also have the upgraded...

Alright guys, Im trying to finish off the last of my leftover project parts. As with the other items Ive sold from this build, I was PRETTY picky about what parts I used. Included are Front and rear Dynalite kits you can see I also grabbed matching (black) lokar accessories as well as full...

First time building a motor. I got most of what I need, just need my cylinders bored .030 and clearanced for 347. Im right near great adventure so anything around there is good but anywhere else in nj is fine too. How much does those services usually cost?

Fresh from the machine shop. Had better Manley 2.02 intake valves installed, complete valve job, decked to 60cc cambers and upgraded Dual trick flow springs installed with 140# seat pressure, 400# open pressure. Heads are hand ported. Made 700rwhp on my 383w with 88mm turbo at 18psi. I'm...

2003 mustang cobra heads with 12k on them. They are the 4 thread and have been sent back to the shop to fix the "tick" I am trying to sell them for $950 or I am trying to trade for ??????? I can take more pics if aswelll http://img502.imageshack.us/img502/2149/easton004.jpg...

these heads are brand new in the boxes that they came in. they are bare with no cams, valves, ect. I have 32 brand new bronze valve guides that come with them. They are not installed in the heads. These heads have never been installed on a motor. I was going to port and polish these and put them...