Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 5.0/5.8 Engine Tech
    I know this has been asked a hundred times of the years. I though I WOULD through it out here again. I have a 93 LX I'm working on and it is having some heating issues. It has a new stock pump and a new stock radiator. The car has the following mods, Windsor Sr. Aluminum heads, crane roller...
  2. Windsor Engine Parts
    I'm selling off some rotating parts.... The crank is a Scat 4340 3.0 stroke Ford journal. It's standard/standard and was balanced with a offset of 28/50oz. I don't recall the exact reasoning, Ronnie Crawford did it and he had some beliefs why the SBF was better that way. It's been in service...
  3. 351C/BBF Parts
    Crower P/N 15481 Mechanical Roller Ford - 351C, 351M & 400 Performance level 5 - Ultra-Action - High torque oval track profile. INT/EXH - Dur @ .050” Lift: 252°/260° RR: 1.73/1.73 Gross Lift: .645”/.626” LSA: 106° RPM: 3000 to 7000 Redline: 7500 It came from a motor I bought and don't need...
  4. 351C/BBF Parts
    Crower 3/8 Diameter Pushrods 8.550" Length Used on Ford 429-460ci, C3 Yates heads on 351 Clevelands, and I believe a few Mopars... All in great condition but don't need... Can send picks upon request. $50 + the ride
  5. 5.0/5.8 Engine Tech
    Installed the Crower billet connecting rods in my 331 motor but cannot find the proper torque value for the bolts. They are Crower bolts with H1315A stamped on the head of each bolt. Anybody have the recommended torque value of these bolts? The bolts look to be 7/16". Thanks.
  6. Windsor Engine Parts
    I have a camshaft that doesn't have many miles. It came out of a 302 that I bought off a friend of mine that rebuilt the motor not too long ago. The specs are .512/.531, 228/234, 112. $125 OBO Shipped
  7. Modular Engine Parts
    As the title states, I am looking for a set of 4V NA Cams. I have decided to finish my build without the Procharger for now, so I need a set of cams to get it going. If the cams you have need springs to work and you have them too, well you get the idea. Let me know what you have...
1-8 of 8 Results