Ford Mustang Forums banner

conversion

  1. Windsor Engine Parts
    Fiveology Stage 3 MAF conversion kit NIB. Comes with A9P computer, overlay injector harness, 76mm MAF sensor and sample tube. This kit was intended for my Lightning but I decided to stay SD and supercharge it so this must go. This kit lists for 799.00 new from Fiveology, I'll take 750.00 and...
  2. Electrical & Wiring
    I have a 1991 4 cylinder lx 5 speed with 5.0 conversion. I recently purchased the vehicle. The dash harness I have is the original 1991 4 cylinder lx. I am trying to figure out what this connector is suppose to connect to. I have the ford repair manual and the electrical&vacuum troubleshooting...
  3. Windsor Engine Parts
    This is a Professional Products EFI conversion kit for a Ford 351W. Everything is BRAND NEW and still in the box. This is polished kit and looks pretty sharp. I bought this to put on Cobra but ended up going with a F.A.S.T. setup with the Super Victor intake instead. This kit should still...
  4. Windsor Engine Parts
    This is a Professional Products EFI conversion kit for a Ford 351W. Everything is BRAND NEW and still in the box. I bought this to put on my Cobra kit car but ended up going with a F.A.S.T. setup with the Super Victor intake instead. This setup should still make plenty of power with a 1200 CFM...
  5. Suspension
    These are in real nice shape. perfect working order. Nice for 5 lug conversion. make offer Located 06810
  6. Electronics and Entertainment
    I'm looking for a computer harness for a 1990 mustang 5.0 HO. I am looking for a computer too but am mainly trying to find the harness first. So if you have either or both, shoot me an offer! Help me get this swap completed :)
  7. Electronics and Entertainment
    SOLD!
  8. General Mustang Tech
    Hey there everybody, I have a question about rear disc/proportioning valve setups. I swapped in a turbo coupe rearend into my 1990 GT and am looking at the whole proportioning valve issue. I have noticed that I can get a 94+ proportioning valve substantially cheaper than one for a 1990. Also...
  9. Suspension
    I'm looking for the Vintage Venom kit that allows the use of GT500 front calipers and rotors on a sn95 mustang. I shopped around for months for a GT500 front brake kit and appropriate wheels. Now that I have them, I've learned that Vintage Venom has discontinued that conversion kit, so I'm in a...
  10. General Mustang Tech
    I have a 88 foxbody, originally a 2.3 converted to 5.0 using a rebuilt 94 cobra motor (with gt-40 heads and intake) motor also includes: E-303 cam, 1.6 roller rockers, bbk spaghetti headers, 24# injectors, 70 mm tb, bbk mass air meter for cold air and 24# injectors, bbk cold air intake, bbk 190...
  11. General Mustang Tech
    Hi, i am interested in doing a five lug conversion on a fox body. I don't know much about the conversion so was wondering what the cost is or what are the parts that i would need. Thanks!
  12. Drivetrain Parts
    Complete Clutch and Brake Pedal Assembly - SOLD SOLD
  13. The Body Shop
    OK, I'm nearly done with converting my 1983 T-top GL to 1987+ interior. One of the last items to check off before I can throw down the carpet and seats is the installation of the 87 E-brake/parking brake. There are two differences from what I can discern that have to be taken care of to do...
  14. Fuel System & Related
    So far I need an electric fuel pump, regulator, throttle cable to carb. 848-210-7714
  15. Suspension
    EDIT: These are 96-04 spindles 96-04 5 Lug Spindles/Hubs off of a 92 Notch roller I had, and a set of PBR Twin Piston Brakes (calipers, brackets, and rotors if wanted) off of an 03 GT. The GT had 30k miles on it when I bought it, and had already had Cobra brakes on it for a couple thousand...
  16. Windsor Engine Parts
    I have a re manufactured motorcraft distributor for use with a carbed roller cam 302 / 5.0. This is a stock replacement dizzy for a carbed 85 mustang with a roller cam. It has performance advance springs installed. It has a steel gear that is compatible a roller cam. I disassembled it to have...
  17. General Mustang Tech
    Hey all, I am looking to do a rear disc 4 lug conversion and I may have found some used pieces. The issue is that not all the pieces will be sold, so I will need to find the remainder of the items and do not know what/where to get them. The setup I am looking at is an SSBC kit with turbo...
  18. Suspension
    Up for sale or trade is a SN95 5lug conversion setup and brake system for your Fox Will Trade for wheels below or big brake upgrade for front. Here is what is in Included: FRONT AND REAR DISC BRAKES!! '94/95 front spindles with hubs, rotors, calipers (front rotors are not pictured but will be...
Top