Ford Mustang Forums banner
computer
1-20 of 64 Results
  1. Electronics and Entertainment
    As the title says looking for fox body mass air computer. a9l , a9p, a3m, etc. PM or text 936 three six six 56 O two.
  2. 94/95 Tech
    Hey guys, I have a 95 gt I just built about a month ago. It’s got cobra intake manifold, gt40p heads, a Ford B cam, new pushrods, rockers, and lifters, BBK 70mm throttle body, cold air intake with stock MAF and stock injectors (3 replacements) and a bama tuner. Before I built it it was...
  3. Electronics and Entertainment
    Hey everyone, I am making the leap to the Holley Terminator computer set up. With that being said, I am going to sell my original 1993 A9L computer (manual) and SCT chip once the Holley computer is installed and running. Really just wanting to see what it is worth to sell. I have used this...
  4. GT & SOHC
    Just got brand new engine installed and plugged in. Fired it up and ran fine for about 5 minutes, the RPMs dropped extremely slow when I touched the throttle. Then after about 10 minutes the "check engine" light came on. I tried plugging in my code reader and all it said was that there was an...
  5. Electronics and Entertainment
    Multiple mass air Foxbody ECUs for auto and manual trans. $265 shipped and PayPal.
  6. EEC Tech
    1992 5.0L LX Convertible. Cranks but doesn't start. I replaced spark plugs, ignition coil, distributor cap/rotor, fuel pump, and fuel filter. Tested spark successfully. Tested fuel pressure successfully. Sometimes the fuel pump runs continuously with KOEO. Sometimes it doesn't run at all...
  7. EEC Tech
    Hello All, I just wanted to post this here for anyone experiencing the same problems I had with a new 1992 5.0 5spd Mustang LX Hatchback me and my wife just bought to restore. Issues: No injector pulse (injectors would not fire), engine would not run except for starting fluid being sprayed in...
  8. Blog
    norton antivirus login Norton is antivirus software that the users can either download it from their official website that can purchase the Norton product from a retail store. One needs to pay a minimum amount for subscription and then can use it on trial for one month. Once you have installed...
  9. GT & SOHC
    I recently replaced the engine in a 1999 GT with one from a 2004. The engine I removed had a Kenne Bell, and other supporting mods, and a custom tune is on the computer. The car won't start and remain running. It sounds as if the timing is too far outta whack. The 04 engine is bone stock. I have...
  10. Electronics and Entertainment
    Hey guys, I recently competed a MAF conversion on my 1988 Thunderbird, but I was sold a bad computer. Can you guys help me out? A9P for a reasonable price, thanks guys!
  11. Electronics and Entertainment
    A9L $103 Shipped w/ pp fees included I had a Tweecer R/t mated to it and never had any issues with it Can ship same day depending when paid I also have a Tweecer r/t I'll sell but just need to find the cable for it
  12. Windsor Engine Parts
    I am doing a Mass air conversion on my 5.0 Thunderbird and need items to complete it. I need an A9P computer and wiring harness. Let me know what you got! Automatic Cars (Calibration code A9P): E9ZZ-12A650-CA E9ZF-12A650-CA F3ZF-12A650-BA See more at: COOL CATS » Celebrating the 1983-88...
  13. Electronics and Entertainment
    I am converting to Mass Air and I am in need of a computer that is set up for Mass Air Flow and Automatic transmission. Also, I am in need of the harness. Let me know what you got!
  14. Electronics and Entertainment
    I'm looking for a computer harness for a 1990 mustang 5.0 HO. I am looking for a computer too but am mainly trying to find the harness first. So if you have either or both, shoot me an offer! Help me get this swap completed :)
  15. Electronics and Entertainment
    LLX4 Computer out of 1996 Cobra SOLD! LLX4 Computer out of a 1997 Cobra SOLD! MSD Tach Adapters off of 96 Cobra, part number 8912, works on 96-98 modular cars and possibly other years as well. Previous owner had an MSD Dis-4 Box on the car. $40 SHIPPED for the pair Motorcraft Coils for 96-98...
  16. V6 Parts
    I have these parts. Starter for 99-04 v6 $40 Starter for 94-98 v6 $40 Control arms $50/set of 4 1998 V6, 5-speed computer $75 2000 V6, 5-speed computer $75 Contact me here by PM or email me at [email protected]
  17. Electronics and Entertainment
    SOLD!! A9L Computer SOLD!
  18. Electronics and Entertainment
    SOLD!
  19. Electronics and Entertainment
    SOLD!
1-20 of 64 Results
Top