Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 351C/BBF Parts
    [SOLD] Listed are a pair of Ford 351C 2V Cleveland 2 Barrel Cylinder Heads that have been cleaned up and include some preparations for screw in studs and guide plates as well as some light porting work. 351 - 2BBL (FORD Part number D1AE-CB) Date Code 2J29 equates to September 29, 1972 Date...
  2. 351C/BBF Parts
    Nice Set Bare Heads Virgin Set $ 450.00
  3. 351C/BBF Parts
    5994 bottom 1916 top (4150) The Dominator top is sold... Currently apart and being blasted. Will be as good as new! I'll also update pics as soon as it returns. Will need new gaskets between upper and lower. $300 shipped
  4. Windsor Engine Parts
    Bought this motor for a project to make my truck a gas pulling truck. Never ended up doing it had everything to build the motor except a cam. So my loss is your gain. I paid 3,400 for the block. I'm looking to get 2,800 + the cost to ship Here is the part number for more info
  5. 351C/BBF Parts
    Crower P/N 15481 Mechanical Roller Ford - 351C, 351M & 400 Performance level 5 - Ultra-Action - High torque oval track profile. INT/EXH - Dur @ .050” Lift: 252°/260° RR: 1.73/1.73 Gross Lift: .645”/.626” LSA: 106° RPM: 3000 to 7000 Redline: 7500 It came from a motor I bought and don't need...
  6. 351C/BBF Parts
    #31127 w/ Pickup Tube (Oil Pump Not Included) Pan Capacity is 7 Quarts Plus Filter - 6 1/2" Front, 4 5/8" Center, 8 1/4" Rear, 8" Sump Length Threw a rod and hit the pan, but was repaired Only issue is the cosmetic looks... $250 Shipped
  7. 351C/BBF Parts
    ARP 154-3604 Cylinder Head Bolts, High Performance, Hex Head, Ford, 351C, 351M, 400, Kit Used once... I really don't think there is even a scratch on them; will need to relook. Can send pics upon request. $65 will get them to you... Fees and Shipping included!! Thank you. 214.206.6384
  8. 351C/BBF Parts
    1970 Cleveland 4V Closed chamber heads DOAE 4V Closed Chamber heads, all new componets, here's the list: Everything new! Magnafluxed 3 angle valve job Ferrea 5000 series Stainless Valves 2.19 Intake 1.71 exhaust New Guides, New valve seals Hardened seats installed Machined for Screw in Studs...
1-8 of 8 Results