Ford Mustang Forums banner
build
1-19 of 19 Results
  1. GT & SOHC
    Ok so first and foremost here is what I have for my Vortech build so far.. 1999 Mustang GT - Vortech v-1 t trim Head - Discharge Tube Assembly - Mounting Bracket Assembly - Air Inlet Assembly - Oil Feed Assembly - Oil Drain Assembly - CXracing intercooler w/3" piping - 3.6 Pulley - 42#...
  2. 5.0/5.8 Engine Tech
    Hey all im beginning to build my motor im turning a 351W to a 408 Stroker motor i want to keep efi, i plan on putting a supercharger at some point in time. if any body can help with suggested to help out id appreciate it. its gonna be going in a 1994/5 if anyone has any tips or issues theyve ran...
  3. Member Build-Up Projects
    I have a 87 Gt with a 93 Gt motor and transmission. I`m buying a Dart 363 Bare block and i`m looking for suggestion and ideas on which parts can get me to my goal of around 600-700 rwhp daily driver (ex. cam, pistons....) also a good trans combo for this
  4. 5.0/5.8 Engine Tech
    Hey all, this will be my first ever motor build and I have some noob questions so dont bash please! I am planning on building a 351w efi to put in my fox and I had some questions before I go through with it. Here is my build list so far, please tell me if this is not a good build or parts wont...
  5. 5.0/5.8 Engine Tech
    I bought an 1989 lx with a t5 and 3.08 rear gears about a month ago, did all the maintenance on it now I want to get heads, cam, upper and lower intake, rear end gears, throttle body, injectors, and a maf. I just need help picking some parts that will work well together. I currently have a bone...
  6. 5.0/5.8 Engine Tech
    I recently traded to a 89 lx that has a engine and transmission that was not in the car and it was not running when I got it, I do not know the year or vehicle it came out of. Im new to building and working with engines and just want input on what to do to the engine while I have it out of the...
  7. 5.0/5.8 Engine Tech
    Hi all, I am building a 347 Stroker. I have learned a lot in the past 6 months, but the thing I can't seem to learn is how to choose a good cam shaft.That is why I'm posting it on here. Here is my build: Stock Block Forged I beam rods Forged Pistons -4 ccs For valve reliefs Afr 205 Heads...
  8. 5.0/5.8 Engine Tech
    Im looking to do 2 different builds and can't decide what one to do. First off all of the things that will stay the same: 1995 mustang gt, 347 stroker stock block for now, Afr 205 Heads, trick flow r series intake, t5 Tranny, 3.73 gears, bbk equal length shorty headers, bbl off road h pipe...
  9. Lightning/Harley Davidson F-150
    New to working on Gen 2 Lightnings, I want to build an 800hp Lightning, I have a stock motor at the moment but getting started is taking a little time because I have a lack of information. I need to know if the stock block/crank will hold up to the hp I want to make or if there is a better...
  10. S197 Mustang (2005-2010)
    So yeah pretty much it. I'm building a turbo car. I've started this thread on other sites, but you can never have too much help! I'll be posting progress with the build along the way. It'll be a long and drawn out process but it'll be worth it. Figured I would go ahead and start this on here...
  11. 5.0/5.8 Engine Tech
    Hello, I have a 89 lx 5 speed, I've been searching for months and Believe I have a good solid 331 stroker build put together. I would appreciate everyone's input and/or advice on what I've come up with. Scat 331 stoker kit with either flat top or small dome pistons ( +3cc dome), Comp Xr282hr...
  12. SVT & DOHC
    Ok do I am deciding on a path to go with my mach 1. I am deciding on all motor too end for one which is: throttle body, cai, long tubes, 42lb injectors, kb boost a pump, cams (possibly comp 106400, and port polished heads tryin to get 350rwhp all motor. Or turbo/supercharge. If I go all motor I...
  13. 5.0/5.8 Engine Tech
    Well this is my first engine to build. I got a block from a 87 f150 I know its setup for a roller cam. I was wanting to know if the stock crank can handle 300-350 hp. and whats a good head, cam, and carb combo to run to get where I wanna be. Im gonna bore the block .30 over and have all the...
  14. 5.0/5.8 Engine Tech
    FIXED FIXED
  15. 5.0/5.8 Engine Tech
    So im in the market for a new engine project. Considered just building my 302 but i dont want my car off the road for that long. Since i am going to be buying a new motor anyway i figured i mine as well just start fresh with a 351w. I found 2 351w's within an hour of my house the problem is i...
  16. Member Build-Up Projects
    02 Roush Convertible Rebuild (DONE) This story starts at Ft. Campbell, KY. I bought this car in Florda while in Afghanistan (took a chance) and it turned out great. No problems what so ever. A couple months later I put a Series 2 Saleen super charger on it (Eaton M112). Less than 2 months later...
  17. General Mustang Tech
    figured it was time to create my build thread little about the car, i have had it for 5 years and i have been changing and spending as much as i was the day i got it. the day i bought it after a good clean and wax i than got the drag racing bug launched pretty hard with the 5 spd c...
  18. 5.0/5.8 Engine Tech
    I have an unnecessary z cam!! So the car is daily driven, edelbrock intake, 70mm throttlebody, 351 heads, unsure of brand but rocker arms, stock bottom end though. Also...thinking turbo kit in the future so i need it to work for both. So....I was kinda thinking b cam? Thanks in advance
  19. Turbochargers
    Well, I decided to document my latest changes to my combo here on The Corral. I decided to do this because it seems as though it will be the most interesting and challenging of all of the different combos that this car has seen. The car was originally a 4 banger, converted to V8 with a stock...
1-19 of 19 Results
Top