Ford Mustang Forums banner

brakes

  1. General Mustang Tech
    On the drive home the car was acting weird. Then it wouldn't roll down my driveway like it always does. Took out my heat gun. The front two rotors were 175 degrees. Right rear was 225. and the Left rear was 335!. I have a 2003 GT. I also have a parting out 2000 v6. Are the calipers...
  2. Suspension
    I'm looking for a front big brake upgrade. Hoping somebody has a complete set up, but not 100% necessary for me. I'm currently running stock '95 GT brakes/spindles on my fox. I'm not much interested in a stock Cobra caliper set up. I'm open to other brands, but prefer Wilwoods. I appreciate it!
  3. SVT & DOHC
    Hi all. I need to pull the driver's side heads off. I read this thread about valve-cover removal, but have reached an impasse at separating the brake cylinder from the booster. Not only is the bottom nut on the back of my master cylinder (not the front, as depicted in the other thread), but...
  4. General Mustang Tech
    Hi guys, i just bought a project 85 notch and it had rear disks installed by previous owner. Got the car running and the front brakes dont work and they also dont bleed! I bleed the rear brakes no problem. Pedal softened when bleeding. On the fronts pedal stays rock hard and wont bleed when...
  5. Suspension
    BNIB pair of rear rotors for 2005-2011 Mustang. FoMoCo Part # 5R3Z2Co26AA (Retail $69 ea)= $60 pair Used pair of front rotors for GT500, 14inch. FoMoCo Part # BRRF 6 11125. 30,000 miles, never turned. (Retail $189 ea) = $100 pair. Pics posted on craigslist Boise ID. Prefer local P/U. Will ship...
  6. General Mustang Tech
    Hey Guys, Just picked up an 89 Notchback, its an original 5 speed 5.0 car and I'm having brake issues that I cant put my finger on. The car came with a 5 lug swap and discs at all corners, previous owner claims the car has a 93 Cobra brake booster and master cylinder but I'm having some...
  7. Suspension
    Wilwood Dynalite Pro series rear disk with parking brake kit for Ford 9" with large new style ends. Part # 140-7140 Paid $650 plus. I only mounted it never used it. Wouldn't fit my rims I had custom made. Summit wouldn't take a return . My loss is your gain. PRICE dropped to $400 plus you pay...
  8. Suspension
    Need the calipers and brackets and any other related hardware you may have. Thanks. JB
  9. S197 Mustang GT (2011-2014)
    I have a 2014 mustang, non brembo, with a constant sqeak coming from the right rear of the car. I suspect the noise is coming from the brakes because the squeak goes away when the brakes are applied, and seems to get louder the hotter the brakes get. I have visited the Ford dealership twice for...
  10. Suspension
    Not sure how many shooters are re-loaders we have here, but I have these gift cards and I would rather have mustang parts than more reloading equipment. Looking for a lot of things can trade up with cash. Some things I am looking for are: PNP ECU pref PIMP Manual rack set up K member...
  11. Suspension
    Manual brake bracket with manual strange master cylinder like new. Big end proportioning valve 6305818790 140$
  12. Road Racing/Auto X
    Hey everybody, I have been running Super Blue racing brake fluid for the past 2-3 years and since it is illegal now, I am looking for a good replacement racing fluid. Is anyone running Motul 600 on here? That looks to be the best and most cost effective racing fluid that I can find. I will be...
  13. Suspension
    Found a set
  14. Road Racing/Auto X
    Standard Format Events (SF) These events are open to drivers of all ability levels. There will be 4 run groups with 4 25 minute driving sessions per group. In-car driver coaching for Novice drivers (available to Intermediate and Advanced upon request) and classroom sessions are also included...
  15. General Mustang Tech
    The car is an 87 GT, I need to replace the drivers side brake line coming off the stock/original master cylinder and going to the brake hose in the fender. The line comes out the bottom of the MC and proceeds directly to the left-front disk brake. I am replacing the original master cylinder...
  16. General Mustang Tech
    Hey there everybody, I have a question about rear disc/proportioning valve setups. I swapped in a turbo coupe rearend into my 1990 GT and am looking at the whole proportioning valve issue. I have noticed that I can get a 94+ proportioning valve substantially cheaper than one for a 1990. Also...
  17. Suspension
    Same as the cobra calipers except they do not say cobra. These are from a 2003 Mach 1. One side has some minor scrapes in the paint as you can see in the pictures. I am asking $300 obo. Includes calipers, brackets, lines and pads. Sometimes this site emails me, sometimes not. Best bet is...
  18. S197 and Coyote Parts
    I've got a set of 07 Shelby front brembo's for sale around 10k on them. Fresh turned rotors ready to bolt on and go. 725 shipped cont 48. Check the feedback no junk here.
  19. Suspension
    ROUSH 4-piston BBK w.14" 2-pc Rotor (05-14) For Sale, A complete set of low mile (~4,000mi) RED Roush 4-Piston Ford Mustang Brake kit that fits all 2005-2014 Mustangs. This kit comes standard on some of ROUSH's highest performance vehicles, including the ROUSH Stage-3, 540 Hammer, and ROUSH...
  20. Drivetrain Parts
    Selling a set of used but low miles(1000) aerospace front brakes 5lugs #AC-220 lists for $655.99 in jegs. complete with stainless hoses and modifed spindles ready to bolt on and go. these fit fox body mustang. Sell for 575$ shipped US states only Also have used but around 1,000 miles upr k...
Top